rendered paste bodyRedBoot> ip_address -l 10.54.89.227 -h 10.54.89.223
IP: 10.54.89.227/255.255.255.0, Gateway: 192.168.0.1
Default server: 10.54.89.223, DNS server IP: 0.0.0.0
RedBoot> ip_address -l 10.54.89.227 -h 10.54.89.223 8mbimage
** Error: no default/non-flag arguments supported
RedBoot> load -r -v -b 0x01000000 -h 10.54.89.223 8mbimage
Using default protocol (TFTP)
/
Raw file loaded 0x01000000-0x017fffff, assumed entry at 0x01000000
RedBoot> fis write -f 0x50060000 -b 0x01060000 -l 0x7a0000
* CAUTION * about to program FLASH
at 0x50060000..0x507fffff from 0x01060000 - continue (y/n)? y
... Erase from 0x50060000-0x50800000: .............................................................
RedBoot> reset
... Resetting.+
Ethernet eth0: MAC address 00:0f:66:7b:fe:f1
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0000b26c
A
APEX Boot Loader 1.4.17 -- Copyright (c) 2004,2005,2006,2007 Marc Singer
APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.
apex => mem:0x00200000+0xb26c (45676 bytes)
env => nor:0x7c000+15k (in-use)
Use the command 'help help' to get started.
# 'sdram-init
apex> print
fis-drv *= nor:0x7e0000+4k
cmdline *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
cmdline-alt *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
bootaddr *= 0x00008000
ramdiskaddr *= 0x01000000
kernelsrc *= fis://kernel
kernelsrc-alt *= fis://kernel
ramdisksrc *= fis://ramdisk
ramdisksrc-alt *= fis://ramdisk
startup = 'sdram-init; memscan -u 0+256m; copy -s fis://kernel 0x00008000; copy -s fis://ramdisk 0x01000000; wait 10 Type ^C key to cancel autoboot.; boot'
apex> setenv sdram-init; memscan -u 0+256m; copy -s fis://kernel 0x00008000; copy -s fis://ramdisk 0x01000000; wait 10 Type ^C key to cancel autoboot.; boot
Unrecognized variable
apex> setenv startup sdram-init; memscan -u 0+256m; copy -s fis://kernel 0x00008000; copy -s fis://ramdisk 0x01000000; wait 10 Type ^C key to cancel autoboot.; boot
apex>
apex>
apex> reset
Performing watchdog reset
+Ethernet eth0: MAC address 00:0f:66:7b:fe:f1
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0000b26c
A
APEX Boot Loader 1.4.17 -- Copyright (c) 2004,2005,2006,2007 Marc Singer
APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.
apex => mem:0x00200000+0xb26c (45676 bytes)
env => nor:0x7c000+15k (in-use)
Use the command 'help help' to get started.
# sdram-init
2 banks of 2 512Mib chips
# memscan -u 0+256m
0x0 0x10000000 (256 MiB)
# copy -s fis://kernel 0x00008000
1441760 bytes transferred
# copy -s fis://ramdisk 0x01000000
6291440 bytes transferred
# wait 10 Type ^C key to cancel autoboot.
Type ^C key to cancel autoboot.
# boot
ATAG_HEADER
ATAG_MEM: start 0x00000000 size 0x10000000
ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug'
ATAG_INITRD2: start 0x01000000 size 0x00400000
ATAG_END
Booting kernel at 0x00008000...
Uncompressing Linux............................................................................... done, booting the kernel.
Linux version 2.6.18-4-ixp4xx (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Mar 27 18:01:56 BST 2007
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
Machine: Linksys NSLU2
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 65536
Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
IRQ lockup detection disabled
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 253092KB available (1948K code, 496K data, 92K init)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs... it is
Freeing initrd memory: 4096K
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(4.160:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
NSLU2 MAC: 00:0f:66:7b:fe:f1
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00080000 : "Loader"
0x00080000-0x001e0000 : "Kernel"
0x001e0000-0x007e0000 : "Ramdisk"
0x007e0000-0x00800000 : "FIS directory"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
x1205 0-006f: chip found, driver version 1.0.7
x1205 0-006f: rtc core: registered x1205 as rtc0
Registered led device: ready
Registered led device: status
Registered led device: disk-1
Registered led device: disk-2
NET: Registered protocol family 26
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
x1205 0-006f: setting the system clock to 2007-04-12 05:06:27 (1176354387)
Time: OSTS clocksource has been installed.
Freeing init memory: 92K
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: enabling device 0000:00:01.0 (0140 -> 0142)
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: enabling device 0000:00:01.1 (0140 -> 0142)
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: enabling device 0000:00:01.2 (0140 -> 0142)
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
Done.
usb 3-1: new high speed USB device using ehci_hcd and address 2
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
usb 3-1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb 3-2: new high speed USB device using ehci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Loading Intel IXP400 ethernet driver
FATAL: Module ixp400_eth not found.
Failed to load Intel IXP400 ethernet driver
Done.
Begin: Waiting for root file system... ...
Vendor: ST330062 Model: 2A Rev: 0000
Type: Direct-Access ANSI SCSI revision: 00
Vendor: ST330062 Model: 2A Rev: 0000
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: assuming drive cache: write through
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: assuming drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...swapped image found
Image loaded to NPE-B Func:0, Rel: 2:1, Status: 82800000
IXP4XX NPE driver Version 0.3.0 initialized
input: ixp4xx beeper as /class/input/input0
IXP4XX Q Manager 0.2.1 initialized.
ixp4xx_mac driver 0.3.1: eth0 on NPE-B with PHY[1] initialized
done.
Setting parameters of disc: (none).
Activating swap...Adding 128512k swap on /dev/sdb2. Priority:-1 extents:1 across:128512k
Adding 128512k swap on /dev/sda2. Priority:-2 extents:1 across:128512k
done.
Checking root file system...fsck 1.40-WIP (14-Nov-2006)
/: clean, 22292/1221600 files, 172852/2441872 blocks
done.
EXT3 FS on sdb1, internal journal
x1205 0-006f: rtc intf: dev (254:0)
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...done.
Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
/bak: clean, 19105/1221600 files, 152241/2441872 blocks
/home: clean, 53841/35405824 files, 54576803/70784398 blocks
/homebak: clean, 53829/35405824 files, 54572696/70784398 blocks
done.
Setting kernel variables...done.
Mounting local filesystems...kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting portmap daemon...Already running..
Starting MTA: exim4.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Exporting directories for NFS kernel daemon....
Starting NFS kernel daemon: nfsdNFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
mountd.
Starting internet superserver: inetd.
Starting Samba daemons: nmbd smbd.
Starting OpenBSD Secure Shell server: sshd.
Starting the Winbind daemon: winbind.
Starting NFS common utilities: statd idmapd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Debian GNU/Linux 4.0 NSLU2 ttyS0
NSLU2 login: root
Password:
Last login: Thu Apr 12 00:33:42 2007 on ttyS0
Linux NSLU2 2.6.18-4-ixp4xx #1 Tue Mar 27 18:01:56 BST 2007 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
NSLU2:~# free
total used free shared buffers cached
Mem: 257392 32620 224772 0 2440 17796
-/+ buffers/cache: 12384 245008
Swap: 257024 0 257024