rendered paste body +Ethernet eth0: MAC address 00:0f:66:7b:fe:f1
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0000b5cc
A
APEX Boot Loader 1.4.18 -- Copyright (c) 2004,2005,2006,2007 Marc Singer
APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.
apex => mem:0x00200000+0xb5cc (46540 bytes)
env => nor:0x7c000+15k (empty)
Use the command 'help help' to get started.
# copy -s $kernelsrc $bootaddr
# copy -s fis://kernel 0x00008000
1310688 bytes transferred
# copy -s $ramdisksrc $ramdiskaddr
# copy -s fis://ramdisk 0x01000000
6422512 bytes transferred
# wait 10 Type ^C key to cancel autoboot.
Type ^C key to cancel autoboot.
apex> sdram-init
2 banks of 2 512Mib chips
apex> memscan 0+512m
0x0 0x10000000 (256 MiB)
apex> memlimit 256m
apex> memlimit
memlimit is 256.000 MiB, 268435456 (0x10000000) bytes
apex> print
fis-drv *= nor:0x7e0000+4k
cmdline *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
cmdline-alt *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
bootaddr *= 0x00008000
ramdiskaddr *= 0x01000000
kernelsrc *= fis://kernel
kernelsrc-alt *= fis://kernel
ramdisksrc *= fis://ramdisk
ramdisksrc-alt *= fis://ramdisk
startup *= copy -s $kernelsrc $bootaddr; copy -s $ramdisksrc $ramdiskaddr; wait 10 Type ^C key to cancel autoboot.; boot
apex> copy -s $kernelsrc $bootaddr
# copy -s fis://kernel 0x00008000
1310688 bytes transferred
apex> copy -s $ramdisksrc $ramdiskaddr
# copy -s fis://ramdisk 0x01000000
6422512 bytes transferred
apex>
apex> setenv startup 'sdram-init; memscan -u 0+256m; memlimit 256m; copy -s $kernelsrc $bootaddr; copy -s $ramdisksrc $ramdiskaddr; wait 10 Type ^C key to cancel autoboot.; boot'
# setenv startup 'sdram-init; memscan -u 0+256m; memlimit 256m; copy -s fis://kernel 0x00008000; copy -s fis://ramdisk 0x01000000; wait 10 Type ^C key to cancel autoboot.; boot'
-apex>
apex> reset
Performing watchdog reset
+Ethernet eth0: MAC address 00:0f:66:7b:fe:f1
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0000b5cc
A
APEX Boot Loader 1.4.18 -- Copyright (c) 2004,2005,2006,2007 Marc Singer
APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.
apex => mem:0x00200000+0xb5cc (46540 bytes)
env => nor:0x7c000+15k (in-use)
Use the command 'help help' to get started.
# 'sdram-init
apex> print
fis-drv *= nor:0x7e0000+4k
cmdline *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
cmdline-alt *= console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
bootaddr *= 0x00008000
ramdiskaddr *= 0x01000000
kernelsrc *= fis://kernel
kernelsrc-alt *= fis://kernel
ramdisksrc *= fis://ramdisk
ramdisksrc-alt *= fis://ramdisk
startup = 'sdram-init; memscan -u 0+256m; memlimit 256m; copy -s fis://kernel 0x00008000; copy -s fis://ramdisk 0x01000000; wait 10 Type ^C key to cancel autoboot.; boot'
apex> sdram-init;
2 banks of 2 512Mib chips
apex> memscane = - u 0+256m
0x0 0x10000000 (256 MiB)
apex> memlimit 256m
apex> memlimit
memlimit is 256.000 MiB, 268435456 (0x10000000) bytes
apex> copy -s fis://kernel 0x00008000
|/-\|1310688 bytes transferred
apex> copy -s fis://ramdisk 0x01000000
/-\|/-\|/-\|/-\|/-\|/-6422512 bytes transferred
apex> boot
ATAG_HEADER
ATAG_MEM: start 0x00000000 size 0x10000000
ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug'
ATAG_INITRD2: start 0x01000000 size 0x00400000
ATAG_END
Booting kernel at 0x00008000...
Uncompressing Linux............................................................................... done, booting the kernel.
Linux version 2.6.18-4-ixp4xx (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Mar 27 18:01:56 BST 2007
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
Machine: Linksys NSLU2
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 65536
Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
IRQ lockup detection disabled
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 253092KB available (1948K code, 496K data, 92K init)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (length error); looks like an initrd
Freeing initrd memory: 4096K
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
audit: initializing netlink socket (disabled)
audit(2.110:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
NSLU2 MAC: 00:0f:66:7b:fe:f1
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00080000 : "Loader"
0x00080000-0x001c0000 : "Kernel"
0x001c0000-0x007e0000 : "Ramdisk"
0x007e0000-0x00800000 : "FIS directory"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
x1205 0-006f: chip found, driver version 1.0.7
x1205 0-006f: rtc core: registered x1205 as rtc0
Registered led device: ready
Registered led device: status
Registered led device: disk-1
Registered led device: disk-2
NET: Registered protocol family 26
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
x1205 0-006f: setting the system clock to 2007-04-11 06:51:01 (1176274261)
Time: OSTS clocksource has been installed.
RAMDISK: Compressed image found at block 0
length error
VFS: Cannot open root device "<NULL>" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)