rendered paste body[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Linux version 2.6.17-11-powerpc (root@royal) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Thu Feb 1 17:56:02 UTC 2007 (Ubuntu 2.6.17-11.35-powerpc)
[ 0.000000] Found initrd at 0xc1900000:0xc1f02000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xfdfc0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: iBook G4
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
[ 0.000000] Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
[ 0.000000] Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=184, gen1=183
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda4 ro quiet splash
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 18.432000 MHz
[ 0.000000] time_init: processor frequency = 1199.999997 MHz
[ 27.727895] Console: colour dummy device 80x25
[ 27.728497] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.729262] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.759509] High memory: 0k
[ 27.759521] Memory: 508416k/524288k available (2748k kernel code, 15352k reserved, 432k data, 300k bss, 172k init)
[ 27.759743] Calibrating delay loop... 36.73 BogoMIPS (lpj=73472)
[ 27.831719] Security Framework v1.0.0 initialized
[ 27.831739] SELinux: Disabled at boot.
[ 27.831773] Mount-cache hash table entries: 512
[ 27.832123] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 27.834727] checking if image is initramfs... it is
[ 29.289024] Freeing initrd memory: 6152k freed
[ 29.290562] NET: Registered protocol family 16
[ 29.290872] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 29.290884] channel 0 bus <multibus>
[ 29.290890] channel 1 bus <multibus>
[ 29.290937] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 29.290945] channel 0 bus <multibus>
[ 29.290977] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 29.290985] channel 1 bus <multibus>
[ 29.290991] channel 2 bus <multibus>
[ 29.291518] PCI: Probing PCI hardware
[ 29.294083] PCI: Cannot allocate resource region 0 of device 0001:10:18.0
[ 29.294104] PCI: Cannot allocate resource region 0 of device 0001:10:19.0
[ 29.294137] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 29.294149] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 29.295763] NET: Registered protocol family 2
[ 29.327766] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 29.328137] TCP established hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.328715] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.329008] TCP: Hash tables configured (established 65536 bind 32768)
[ 29.329017] TCP reno registered
[ 29.329115] Thermal assist unit not available
[ 29.329340] Registering PowerMac CPU frequency driver
[ 29.329348] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
[ 29.336642] audit: initializing netlink socket (disabled)
[ 29.336671] audit(1176193671.608:1): initialized
[ 29.336847] VFS: Disk quotas dquot_6.5.1
[ 29.336882] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.336969] Initializing Cryptographic API
[ 29.336978] io scheduler noop registered
[ 29.336986] io scheduler anticipatory registered
[ 29.336994] io scheduler deadline registered
[ 29.337009] io scheduler cfq registered (default)
[ 29.337450] PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
[ 29.533193] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
[ 29.533202] radeonfb: Retrieved PLL infos from Open Firmware
[ 29.533208] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
[ 29.533212] radeonfb: PLL min 12000 max 35000
[ 30.468634] radeonfb: Monitor 1 type LCD found
[ 30.468639] radeonfb: EDID probed
[ 30.468642] radeonfb: Monitor 2 type no found
[ 30.468654] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
[ 30.607649] radeonfb: Dynamic Clock Power Management enabled
[ 30.651375] Console: switching to colour frame buffer device 128x48
[ 30.651448] Registered "mnca" backlight controller,level: 15/15
[ 30.651452] radeonfb (0000:00:10.0): ATI Radeon \c
[ 30.684098] Generic RTC Driver v1.07
[ 30.684167] Macintosh non-volatile memory driver v1.1
[ 30.684278] mice: PS/2 mouse device common for all mice
[ 30.685148] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.685646] MacIO PCI driver attached to Intrepid chipset
[ 30.686737] input: Macintosh mouse button emulation as /class/input/input0
[ 30.686960] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 30.686969] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 30.687063] adb: starting probe task...
[ 30.688613] PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
[ 30.939878] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
[ 30.946532] ADB keyboard at 2, handler 1
[ 30.946545] Detected ADB keyboard, type ISO, swapping keys.
[ 30.946713] input: ADB keyboard as /class/input/input1
[ 30.946800] input: ADB Powerbook buttons as /class/input/input2
[ 30.961770] ADB mouse at 3, handler set to 4 (trackpad)
[ 31.021555] input: ADB mouse as /class/input/input3
[ 31.021596] adb: finished probe task...
[ 31.707654] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
[ 31.707672] Probing IDE interface ide0...
[ 31.995835] hda: FUJITSU MHT2030AT, ATA DISK drive
[ 32.667662] hda: Enabling Ultra DMA 5
[ 32.669691] ide0 at 0xe1022000-0xe1022007,0xe1022160 on irq 39
[ 33.687651] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
[ 33.687666] Probing IDE interface ide1...
[ 34.087836] hdc: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive
[ 34.423655] hdc: Enabling MultiWord DMA 2
[ 34.424678] ide1 at 0xe1014000-0xe1014007,0xe1014160 on irq 24
[ 34.424896] PowerMac i2c bus pmu 2 registered
[ 34.424964] PowerMac i2c bus pmu 1 registered
[ 34.425022] PowerMac i2c bus mac-io 0 registered
[ 34.425081] PowerMac i2c bus uni-n 1 registered
[ 34.425135] PowerMac i2c bus uni-n 0 registered
[ 34.425275] TCP bic registered
[ 34.425285] NET: Registered protocol family 1
[ 34.425298] NET: Registered protocol family 8
[ 34.425301] NET: Registered protocol family 20
[ 34.425372] Freeing unused kernel memory: 172k init
[ 35.629982] Capability LSM initialized
[ 36.486175] hda: max request size: 512KiB
[ 36.579940] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 36.623407] usbcore: registered new driver usbfs
[ 36.623451] usbcore: registered new driver hub
[ 36.624971] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 36.625028] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 36.625038] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 36.625049] PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
[ 36.625069] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 36.625309] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
[ 36.625341] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 36.719712] hda: cache flushes supported
[ 36.719814] hda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 36.739687] hub 1-0:1.0: USB hub found
[ 36.739708] hub 1-0:1.0: 2 ports detected
[ 36.739909] [mac] hda1 hda2 hda3 hda4 hda5 hda6
[ 36.741020] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
[ 36.741034] Uniform CD-ROM driver Revision: 3.20
[ 36.845399] PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
[ 36.845428] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 36.845670] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
[ 36.845705] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 36.919794] usb usb2: configuration #1 chosen from 1 choice
[ 36.920033] hub 2-0:1.0: USB hub found
[ 36.920054] hub 2-0:1.0: 3 ports detected
[ 37.168605] PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
[ 37.168631] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 37.168888] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 3
[ 37.179580] ieee1394: Initialized config rom entry `ip1394'
[ 37.191697] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 37.191712] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.191869] usb usb3: configuration #1 chosen from 1 choice
[ 37.191911] hub 3-0:1.0: USB hub found
[ 37.191931] hub 3-0:1.0: 5 ports detected
[ 37.300524] PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
[ 37.300552] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 37.300620] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 37.300654] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 37.375395] usb usb4: configuration #1 chosen from 1 choice
[ 37.375441] hub 4-0:1.0: USB hub found
[ 37.375462] hub 4-0:1.0: 2 ports detected
[ 37.569424] PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
[ 37.620761] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 37.677638] Attempting manual resume
[ 37.790265] kjournald starting. Commit interval 5 seconds
[ 37.790292] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.896086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffe0144b4]
[ 53.874678] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 53.874797] ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 53.877292] ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 53.912215] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 53.980007] PHY ID: 4061e4, addr: 0
[ 53.982828] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:01:44:b4
[ 53.982840] eth0: Found BCM5221 PHY
[ 54.078292] ts: Compaq touchscreen protocol output
[ 54.641507] Linux agpgart interface v0.101 (c) Dave Jones
[ 54.647370] agpgart: Detected Apple UniNorth 2 chipset
[ 54.647487] agpgart: configuring for size idx: 4
[ 54.649285] agpgart: AGP aperture is 16M @ 0x0
[ 56.841573] ieee80211_crypt: registered algorithm 'NULL'
[ 56.845182] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 56.845189] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 56.959909] bcm43xx driver
[ 56.960110] PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
[ 58.618570] apm_emu: APM Emulation 0.5 initialized.
[ 58.725340] SCSI subsystem initialized
[ 58.748353] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 58.748365] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 59.411770] input: PowerMac Beep as /class/input/input4
[ 59.589157] fuse init (API version 7.6)
[ 60.182457] Adding 976552k swap on /dev/hda3. Priority:-1 extents:1 across:976552k
[ 60.357769] EXT3 FS on hda4, internal journal
[ 60.766687] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[ 61.201996] kjournald starting. Commit interval 5 seconds
[ 61.212016] EXT3 FS on hda6, internal journal
[ 61.212028] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.203069] lp: driver loaded but no devices found
[ 70.440086] ppdev: user-space parallel port driver
[ 71.488156] [drm] Initialized drm 1.0.1 20051102
[ 71.631884] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 72.785109] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[ 72.785124] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[ 72.904366] [drm] Setting GART location based on new memory map
[ 72.904381] [drm] Can't use AGP base @0x00000000, won't fit
[ 72.904391] [drm] Loading R200 Microcode
[ 72.904446] [drm] writeback test succeeded in 1 usecs
[ 82.496824] NET: Registered protocol family 10
[ 82.496981] lo: Disabled Privacy Extensions
[ 82.497063] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 82.497104] IPv6 over IPv4 tunneling driver
[ 84.550214] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 84.934055] ondemand governor failed to load due to too long transition latency
[ 85.164210] Bluetooth: Core ver 2.8
[ 85.164225] NET: Registered protocol family 31
[ 85.164228] Bluetooth: HCI device and connection manager initialized
[ 85.164258] Bluetooth: HCI socket layer initialized
[ 85.200636] Bluetooth: L2CAP ver 2.8
[ 85.200646] Bluetooth: L2CAP socket layer initialized
[ 85.260677] Bluetooth: RFCOMM socket layer initialized
[ 85.260710] Bluetooth: RFCOMM TTY layer initialized
[ 85.260714] Bluetooth: RFCOMM ver 1.7
[ 186.992005] NET: Registered protocol family 17
[ 187.414189] ieee80211_crypt: registered algorithm 'WEP'
[ 187.565160] SoftMAC: Open Authentication completed with 00:13:10:28:74:91
[ 187.990160] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 204.439664] eth0: no IPv6 routers present
[ 224.523674] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 224.661859] usb 3-1: configuration #1 chosen from 1 choice
[ 225.134514] usbcore: registered new driver libusual
[ 225.299081] Initializing USB Mass Storage driver...
[ 225.300346] scsi0 : SCSI emulation for USB Mass Storage devices
[ 225.301495] usb-storage: device found at 2
[ 225.301504] usb-storage: waiting for device to settle before scanning
[ 225.301531] usbcore: registered new driver usb-storage
[ 225.301540] USB Mass Storage support registered.
[ 230.300937] usb-storage: device scan complete
[ 230.303250] Vendor: Verbatim Model: USB Drive Rev: 2.00
[ 230.303287] Type: Direct-Access ANSI SCSI revision: 02
[ 231.596752] ready
[ 231.597399] SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
[ 231.598103] sda: Write Protect is off
[ 231.598113] sda: Mode Sense: 03 00 00 00
[ 231.598120] sda: assuming drive cache: write through
[ 231.602100] SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
[ 231.602851] sda: Write Protect is off
[ 231.602860] sda: Mode Sense: 03 00 00 00
[ 231.602866] sda: assuming drive cache: write through
[ 231.602875] sda: unknown partition table
[ 231.607232] sd 0:0:0:0: Attached scsi removable disk sda
[ 231.660928] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 232.579773] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[19609.337708] SoftMAC: Authentication response received from 00:16:ce:3b:7d:b3 but no queue item exists.
[22191.999719] SoftMAC: Received deauthentication packet from 00:18:4d:7d:76:da, but that network is unknown.
[22192.000427] SoftMAC: Received deauthentication packet from 00:18:4d:7d:76:da, but that network is unknown.
[22192.001008] SoftMAC: Received deauthentication packet from 00:18:4d:7d:76:da, but that network is unknown.
[22192.001630] SoftMAC: Received deauthentication packet from 00:18:4d:7d:76:da, but that network is unknown.
[22192.002361] SoftMAC: Received deauthentication packet from 00:18:4d:7d:76:da, but that network is unknown.
[23173.285877] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.287602] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.292237] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.304212] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.585123] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.585500] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23173.586335] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23175.233722] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23175.234172] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23175.237793] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23199.304048] printk: 2 messages suppressed.
[23199.304062] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23199.602714] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23199.604140] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23210.365686] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23210.376748] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.313396] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.317113] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.317673] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.319989] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.323898] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.616259] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.625580] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23250.632935] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23274.281557] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23274.281935] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23274.283725] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23274.286094] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23274.287966] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23294.359992] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23294.360365] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23318.330873] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23415.439198] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23415.732664] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23415.748074] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23436.769274] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23527.798435] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23527.802357] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23529.440903] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23570.404940] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23570.420783] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23643.437826] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23643.441240] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23643.758162] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23643.760425] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23643.774797] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23654.501121] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23654.502469] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23654.504540] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23654.518693] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23682.473357] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23682.480752] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23682.759671] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23682.760267] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23682.764087] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[23723.541148] SoftMAC: Authentication response received from 00:07:cb:35:4f:d6 but no queue item exists.
[25937.979228] SoftMAC: Authentication response received from 00:60:b3:9e:6b:29 but no queue item exists.
[29117.012172] SoftMAC: Authentication response received from 00:18:4d:7d:76:da but no queue item exists.
[29369.707235] SoftMAC: Authentication response received from 00:16:ce:3b:7d:b3 but no queue item exists.
[29369.708187] SoftMAC: Authentication response received from 00:18:4d:7d:76:da but no queue item exists.
[30103.685437] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[30103.685458] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[30103.696041] [drm] Setting GART location based on new memory map
[30103.696057] [drm] Can't use AGP base @0x00000000, won't fit
[30103.696071] [drm] Loading R200 Microcode
[30103.696132] [drm] writeback test succeeded in 1 usecs
[31025.437330] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[31025.437353] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[31025.446988] [drm] Setting GART location based on new memory map
[31025.447004] [drm] Can't use AGP base @0x00000000, won't fit
[31025.447018] [drm] Loading R200 Microcode
[31025.447078] [drm] writeback test succeeded in 1 usecs
[31091.714693] SoftMAC: Authentication response received from 00:14:6c:2c:42:6d but no queue item exists.
[31091.718869] SoftMAC: Authentication response received from 00:14:6c:2c:42:6d but no queue item exists.
[31125.348904] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[31125.348925] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[31125.348982] [drm] Loading R200 Microcode
[31133.413414] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[31133.413435] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[31133.424422] [drm] Setting GART location based on new memory map
[31133.424437] [drm] Can't use AGP base @0x00000000, won't fit
[31133.424451] [drm] Loading R200 Microcode
[31133.424511] [drm] writeback test succeeded in 1 usecs
[33287.613099] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[33287.613120] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[33287.622729] [drm] Setting GART location based on new memory map
[33287.622745] [drm] Can't use AGP base @0x00000000, won't fit
[33287.622759] [drm] Loading R200 Microcode
[33287.622819] [drm] writeback test succeeded in 1 usecs
[33503.620721] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[33503.620737] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[33503.629346] [drm] Setting GART location based on new memory map
[33503.629357] [drm] Can't use AGP base @0x00000000, won't fit
[33503.629367] [drm] Loading R200 Microcode
[33503.629422] [drm] writeback test succeeded in 1 usecs
[34434.291671] usb 3-2: new high speed USB device using ehci_hcd and address 3
[34434.428722] usb 3-2: configuration #1 chosen from 1 choice
[34434.430154] scsi1 : SCSI emulation for USB Mass Storage devices
[34434.430317] usb-storage: device found at 3
[34434.430325] usb-storage: waiting for device to settle before scanning
[34439.304881] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[34439.304899] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[34439.313626] [drm] Setting GART location based on new memory map
[34439.313636] [drm] Can't use AGP base @0x00000000, won't fit
[34439.313646] [drm] Loading R200 Microcode
[34439.313701] [drm] writeback test succeeded in 1 usecs
[34439.428175] usb-storage: device scan complete
[34439.430922] Vendor: WDC WD50 Model: 00AAJS-00TKA0 Rev: 12.0
[34439.430945] Type: Direct-Access ANSI SCSI revision: 04
[34439.433806] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[34439.434349] sdb: Write Protect is off
[34439.434356] sdb: Mode Sense: 11 00 00 00
[34439.434360] sdb: assuming drive cache: write through
[34439.435675] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[34439.436212] sdb: Write Protect is off
[34439.436217] sdb: Mode Sense: 11 00 00 00
[34439.436220] sdb: assuming drive cache: write through
[34439.436227] sdb: sdb1
[34439.441584] sd 1:0:0:0: Attached scsi disk sdb
[34439.441665] sd 1:0:0:0: Attached scsi generic sg1 type 0
[34445.338405] UDF-fs: No partition found (1)
[34445.635642] Unable to identify CD-ROM format.
[34566.993289] SoftMAC: Authentication response received from 00:07:cb:3f:aa:ed but no queue item exists.
[34566.996004] SoftMAC: Authentication response received from 2e:f9:b9:51:ad:c9 but no queue item exists.
[34567.002645] SoftMAC: Authentication response received from 2e:f9:b9:51:ad:c9 but no queue item exists.
[34667.109348] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
[34667.109371] agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[34667.119094] [drm] Setting GART location based on new memory map
[34667.119108] [drm] Can't use AGP base @0x00000000, won't fit
[34667.119123] [drm] Loading R200 Microcode
[34667.119183] [drm] writeback test succeeded in 1 usecs
[34700.142978] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[34905.167115] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[34938.375815] sd 1:0:0:0: SCSI error: return code = 0x8000002
[34938.375834] sdb: Current: sense key: Aborted Command
[34938.375842] Additional sense: No additional sense information
[34938.375858] end_request: I/O error, dev sdb, sector 339759
[34938.375871] Buffer I/O error on device sdb1, logical block 339696
[34958.271193] sd 1:0:0:0: SCSI error: return code = 0x8000002
[34958.271210] sdb: Current: sense key: Aborted Command
[34958.271218] Additional sense: No additional sense information
[34958.271233] end_request: I/O error, dev sdb, sector 339760
[34958.271246] Buffer I/O error on device sdb1, logical block 339697
[34979.019597] sd 1:0:0:0: SCSI error: return code = 0x8000002
[34979.019614] sdb: Current: sense key: Aborted Command
[34979.019622] Additional sense: No additional sense information
[34979.019637] end_request: I/O error, dev sdb, sector 339761
[34979.019658] Buffer I/O error on device sdb1, logical block 339698
[34997.742236] sd 1:0:0:0: SCSI error: return code = 0x8000002
[34997.742253] sdb: Current: sense key: Aborted Command
[34997.742261] Additional sense: No additional sense information
[34997.742277] end_request: I/O error, dev sdb, sector 339762
[34997.742290] Buffer I/O error on device sdb1, logical block 339699
[35018.482642] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35018.482664] sdb: Current: sense key: Aborted Command
[35018.482672] Additional sense: No additional sense information
[35018.482687] end_request: I/O error, dev sdb, sector 339763
[35018.482700] Buffer I/O error on device sdb1, logical block 339700
[35040.530309] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35040.530325] sdb: Current: sense key: Aborted Command
[35040.530334] Additional sense: No additional sense information
[35040.530349] end_request: I/O error, dev sdb, sector 339764
[35040.530361] Buffer I/O error on device sdb1, logical block 339701
[35060.261832] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35060.261848] sdb: Current: sense key: Aborted Command
[35060.261857] Additional sense: No additional sense information
[35060.261871] end_request: I/O error, dev sdb, sector 339765
[35060.261885] Buffer I/O error on device sdb1, logical block 339702
[35081.019800] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35081.019817] sdb: Current: sense key: Aborted Command
[35081.019825] Additional sense: No additional sense information
[35081.019841] end_request: I/O error, dev sdb, sector 339766
[35081.019854] Buffer I/O error on device sdb1, logical block 339703
[35097.727800] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35097.727819] sdb: Current: sense key: Aborted Command
[35097.727827] Additional sense: No additional sense information
[35097.727843] end_request: I/O error, dev sdb, sector 339767
[35097.727856] Buffer I/O error on device sdb1, logical block 339704
[35117.457505] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35117.457522] sdb: Current: sense key: Aborted Command
[35117.457531] Additional sense: No additional sense information
[35117.457546] end_request: I/O error, dev sdb, sector 339768
[35117.457559] Buffer I/O error on device sdb1, logical block 339705
[35139.207144] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35139.207166] sdb: Current: sense key: Aborted Command
[35139.207174] Additional sense: No additional sense information
[35139.207189] end_request: I/O error, dev sdb, sector 339769
[35139.207202] Buffer I/O error on device sdb1, logical block 339706
[35159.953329] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35159.953346] sdb: Current: sense key: Aborted Command
[35159.953354] Additional sense: No additional sense information
[35159.953369] end_request: I/O error, dev sdb, sector 339770
[35159.953383] Buffer I/O error on device sdb1, logical block 339707
[35179.684846] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35179.684861] sdb: Current: sense key: Aborted Command
[35179.684870] Additional sense: No additional sense information
[35179.684885] end_request: I/O error, dev sdb, sector 339771
[35179.684898] Buffer I/O error on device sdb1, logical block 339708
[35198.408482] sd 1:0:0:0: SCSI error: return code = 0x8000002
[35198.408497] sdb: Current: sense key: Aborted Command
[35198.408506] Additional sense: No additional sense information
[35198.408521] end_request: I/O error, dev sdb, sector 339772
[35198.408534] Buffer I/O error on device sdb1, logical block 339709
[35206.055869] ohci_hcd 0001:10:1b.1: wakeup
[35206.230801] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.230817] end_request: I/O error, dev sdb, sector 339773
[35206.230830] Buffer I/O error on device sdb1, logical block 339710
[35206.232596] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.232608] end_request: I/O error, dev sdb, sector 339774
[35206.232618] Buffer I/O error on device sdb1, logical block 339711
[35206.233865] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.233875] end_request: I/O error, dev sdb, sector 339775
[35206.233884] Buffer I/O error on device sdb1, logical block 339712
[35206.235099] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.235108] end_request: I/O error, dev sdb, sector 339776
[35206.235117] Buffer I/O error on device sdb1, logical block 339713
[35206.236719] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.236730] end_request: I/O error, dev sdb, sector 339777
[35206.236740] Buffer I/O error on device sdb1, logical block 339714
[35206.237961] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.237970] end_request: I/O error, dev sdb, sector 339778
[35206.237980] Buffer I/O error on device sdb1, logical block 339715
[35206.239186] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.239195] end_request: I/O error, dev sdb, sector 339779
[35206.239204] Buffer I/O error on device sdb1, logical block 339716
[35206.240739] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.240749] end_request: I/O error, dev sdb, sector 339780
[35206.240759] Buffer I/O error on device sdb1, logical block 339717
[35206.241993] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.242002] end_request: I/O error, dev sdb, sector 339781
[35206.242011] Buffer I/O error on device sdb1, logical block 339718
[35206.243218] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.243227] end_request: I/O error, dev sdb, sector 339782
[35206.243236] Buffer I/O error on device sdb1, logical block 339719
[35206.244919] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.244930] end_request: I/O error, dev sdb, sector 339783
[35206.245906] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.245915] end_request: I/O error, dev sdb, sector 339784
[35206.246787] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.246797] end_request: I/O error, dev sdb, sector 339785
[35206.247667] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.247676] end_request: I/O error, dev sdb, sector 339786
[35206.248986] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.248997] end_request: I/O error, dev sdb, sector 339787
[35206.249898] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.249909] end_request: I/O error, dev sdb, sector 339788
[35206.250493] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.250502] end_request: I/O error, dev sdb, sector 339789
[35206.251077] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.251086] end_request: I/O error, dev sdb, sector 339790
[35206.251669] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.251678] end_request: I/O error, dev sdb, sector 339791
[35206.252457] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.252466] end_request: I/O error, dev sdb, sector 339792
[35206.253043] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.253051] end_request: I/O error, dev sdb, sector 339793
[35206.253600] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.253609] end_request: I/O error, dev sdb, sector 339794
[35206.254124] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.254132] end_request: I/O error, dev sdb, sector 339795
[35206.254644] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.254652] end_request: I/O error, dev sdb, sector 339796
[35206.255163] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.255172] end_request: I/O error, dev sdb, sector 339797
[35206.255933] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.255944] end_request: I/O error, dev sdb, sector 339798
[35206.256468] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.256477] end_request: I/O error, dev sdb, sector 339799
[35206.256986] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.256995] end_request: I/O error, dev sdb, sector 339800
[35206.257503] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.257511] end_request: I/O error, dev sdb, sector 339801
[35206.258018] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.258027] end_request: I/O error, dev sdb, sector 339802
[35206.258533] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.258542] end_request: I/O error, dev sdb, sector 339803
[35206.259048] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.259056] end_request: I/O error, dev sdb, sector 339804
[35206.259561] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.259570] end_request: I/O error, dev sdb, sector 339805
[35206.260281] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.260291] end_request: I/O error, dev sdb, sector 339806
[35206.260801] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.260810] end_request: I/O error, dev sdb, sector 339807
[35206.261314] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.261322] end_request: I/O error, dev sdb, sector 339808
[35206.261886] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.261896] end_request: I/O error, dev sdb, sector 339809
[35206.262401] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.262410] end_request: I/O error, dev sdb, sector 339810
[35206.262911] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.262920] end_request: I/O error, dev sdb, sector 339811
[35206.263454] sd 1:0:0:0: SCSI error: return code = 0x70000
[35206.263463] end_request: I/O error, dev sdb, sector 339812
[35206.263704] usb 3-2: USB disconnect, address 3
[35206.264262] sd 1:0:0:0: SCSI error: return code = 0x10000
[35206.264272] end_request: I/O error, dev sdb, sector 339813
[35206.264309] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264438] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264639] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264848] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264862] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264882] sd 1:0:0:0: rejecting I/O to device being removed
[35206.264998] sd 1:0:0:0: SCSI error: return code = 0x10000
[35206.265006] end_request: I/O error, dev sdb, sector 339887
[35206.265056] sd 1:0:0:0: rejecting I/O to device being removed
[35206.472726] 1:0:0:0: rejecting I/O to dead device
[35206.472979] 1:0:0:0: rejecting I/O to dead device
[35206.473539] 1:0:0:0: rejecting I/O to dead device
[35206.473562] 1:0:0:0: rejecting I/O to dead device
[35206.473931] 1:0:0:0: rejecting I/O to dead device
[35206.473967] 1:0:0:0: rejecting I/O to dead device
[35206.473981] 1:0:0:0: rejecting I/O to dead device
[35206.473994] 1:0:0:0: rejecting I/O to dead device
[35219.775673] usb 3-2: new high speed USB device using ehci_hcd and address 4
[35219.912558] usb 3-2: configuration #1 chosen from 1 choice
[35219.914180] scsi2 : SCSI emulation for USB Mass Storage devices
[35219.914343] usb-storage: device found at 4
[35219.914351] usb-storage: waiting for device to settle before scanning
[35224.913028] usb-storage: device scan complete
[35224.913971] Vendor: WDC WD50 Model: 00AAJS-00TKA0 Rev: 12.0
[35224.914005] Type: Direct-Access ANSI SCSI revision: 04
[35224.917936] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[35224.918666] sdb: Write Protect is off
[35224.918677] sdb: Mode Sense: 11 00 00 00
[35224.918684] sdb: assuming drive cache: write through
[35224.920287] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
[35224.920905] sdb: Write Protect is off
[35224.920916] sdb: Mode Sense: 11 00 00 00
[35224.920922] sdb: assuming drive cache: write through
[35224.920932] sdb: sdb1
[35224.924878] sd 2:0:0:0: Attached scsi disk sdb
[35224.924982] sd 2:0:0:0: Attached scsi generic sg1 type 0
[35226.045957] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[35550.915707] usb 3-1: USB disconnect, address 2
[35635.335706] usb 3-2: USB disconnect, address 4
[35731.027862] ohci_hcd 0001:10:1b.0: wakeup
[35742.927678] usb 3-1: new high speed USB device using ehci_hcd and address 6
[35743.064451] usb 3-1: configuration #1 chosen from 1 choice
[35743.066096] scsi3 : SCSI emulation for USB Mass Storage devices
[35743.066249] usb-storage: device found at 6
[35743.066256] usb-storage: waiting for device to settle before scanning
[35748.064920] usb-storage: device scan complete
[35748.065876] Vendor: WDC WD50 Model: 00AAJS-00TKA0 Rev: 12.0
[35748.065912] Type: Direct-Access ANSI SCSI revision: 04
[35748.070230] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[35748.070925] sda: Write Protect is off
[35748.070935] sda: Mode Sense: 11 00 00 00
[35748.070941] sda: assuming drive cache: write through
[35748.072478] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[35748.073016] sda: Write Protect is off
[35748.073024] sda: Mode Sense: 11 00 00 00
[35748.073031] sda: assuming drive cache: write through
[35748.073040] sda: sda1
[35748.076774] sd 3:0:0:0: Attached scsi disk sda
[35748.076873] sd 3:0:0:0: Attached scsi generic sg0 type 0
[35804.069321] sd 3:0:0:0: SCSI error: return code = 0x8000002
[35804.069338] sda: Current: sense key: Aborted Command
[35804.069346] Additional sense: No additional sense information
[35804.069361] end_request: I/O error, dev sda, sector 476799
[35804.069370] printk: 507 messages suppressed.
[35804.069380] Buffer I/O error on device sda1, logical block 238368
[35817.383842] ohci_hcd 0001:10:1b.0: wakeup
[35817.551955] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.551967] end_request: I/O error, dev sda, sector 476801
[35817.551980] Buffer I/O error on device sda1, logical block 238369
[35817.553428] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.553438] end_request: I/O error, dev sda, sector 476803
[35817.553448] Buffer I/O error on device sda1, logical block 238370
[35817.554602] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.554611] end_request: I/O error, dev sda, sector 476805
[35817.554620] Buffer I/O error on device sda1, logical block 238371
[35817.556010] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.556020] end_request: I/O error, dev sda, sector 476807
[35817.556029] Buffer I/O error on device sda1, logical block 238372
[35817.557179] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.557188] end_request: I/O error, dev sda, sector 476809
[35817.557197] Buffer I/O error on device sda1, logical block 238373
[35817.558335] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.558344] end_request: I/O error, dev sda, sector 476811
[35817.558354] Buffer I/O error on device sda1, logical block 238374
[35817.559491] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.559500] end_request: I/O error, dev sda, sector 476813
[35817.559509] Buffer I/O error on device sda1, logical block 238375
[35817.560768] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.560777] end_request: I/O error, dev sda, sector 476815
[35817.560787] Buffer I/O error on device sda1, logical block 238376
[35817.561929] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.561938] end_request: I/O error, dev sda, sector 476817
[35817.561947] Buffer I/O error on device sda1, logical block 238377
[35817.563083] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.563092] end_request: I/O error, dev sda, sector 476819
[35817.563101] Buffer I/O error on device sda1, logical block 238378
[35817.564446] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.564455] end_request: I/O error, dev sda, sector 476821
[35817.565254] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.565263] end_request: I/O error, dev sda, sector 476823
[35817.566056] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.566065] end_request: I/O error, dev sda, sector 476825
[35817.566856] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.566865] end_request: I/O error, dev sda, sector 476827
[35817.567747] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.567757] end_request: I/O error, dev sda, sector 476829
[35817.568575] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.568584] end_request: I/O error, dev sda, sector 476831
[35817.569452] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.569461] end_request: I/O error, dev sda, sector 476833
[35817.570302] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.570310] end_request: I/O error, dev sda, sector 476835
[35817.571102] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.571111] end_request: I/O error, dev sda, sector 476837
[35817.572021] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.572031] end_request: I/O error, dev sda, sector 476799
[35817.572824] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.572833] end_request: I/O error, dev sda, sector 476801
[35817.573619] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.573628] end_request: I/O error, dev sda, sector 476803
[35817.574412] sd 3:0:0:0: SCSI error: return code = 0x70000
[35817.574421] end_request: I/O error, dev sda, sector 476805
[35817.591774] usb 3-1: USB disconnect, address 6
[35854.563673] usb 3-2: new high speed USB device using ehci_hcd and address 7
[35854.700441] usb 3-2: configuration #1 chosen from 1 choice
[35854.701952] scsi4 : SCSI emulation for USB Mass Storage devices
[35854.702105] usb-storage: device found at 7
[35854.702113] usb-storage: waiting for device to settle before scanning
[35859.700783] usb-storage: device scan complete
[35859.701726] Vendor: Model: Rev:
[35859.701756] Type: Direct-Access ANSI SCSI revision: 04
[35859.724841] sda: Unit Not Ready, sense:
[35859.724855] : Current: sense key: Aborted Command
[35859.724862] Additional sense: No additional sense information
[35859.726210] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[35859.726228] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[35859.727208] sda: Write Protect is off
[35859.727217] sda: Mode Sense: 11 00 00 00
[35859.727224] sda: assuming drive cache: write through
[35859.727355] sd 4:0:0:0: Attached scsi disk sda
[35859.727452] sd 4:0:0:0: Attached scsi generic sg0 type 0
[35870.451706] usb 3-2: USB disconnect, address 7
[35872.651838] ohci_hcd 0001:10:1b.1: wakeup
[35893.875672] usb 3-2: new high speed USB device using ehci_hcd and address 9
[35894.012611] usb 3-2: configuration #1 chosen from 1 choice
[35894.014132] scsi5 : SCSI emulation for USB Mass Storage devices
[35894.014283] usb-storage: device found at 9
[35894.014291] usb-storage: waiting for device to settle before scanning
[35899.013084] usb-storage: device scan complete
[35899.014079] Vendor: Model: Rev:
[35899.014110] Type: Direct-Access ANSI SCSI revision: 04
[35899.037142] sda: Unit Not Ready, sense:
[35899.037157] : Current: sense key: Aborted Command
[35899.037165] Additional sense: No additional sense information
[35899.038620] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[35899.038638] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[35899.039616] sda: Write Protect is off
[35899.039626] sda: Mode Sense: 11 00 00 00
[35899.039632] sda: assuming drive cache: write through
[35899.039798] sd 5:0:0:0: Attached scsi disk sda
[35899.039895] sd 5:0:0:0: Attached scsi generic sg0 type 0
[35900.943704] usb 3-2: USB disconnect, address 9
[35904.711690] usb 3-2: new high speed USB device using ehci_hcd and address 10
[35904.848687] usb 3-2: configuration #1 chosen from 1 choice
[35904.850081] scsi6 : SCSI emulation for USB Mass Storage devices
[35904.850231] usb-storage: device found at 10
[35904.850238] usb-storage: waiting for device to settle before scanning
[35909.848167] usb-storage: device scan complete
[35909.849110] Vendor: Model: Rev:
[35909.849141] Type: Direct-Access ANSI SCSI revision: 04
[35909.872222] sda: Unit Not Ready, sense:
[35909.872235] : Current: sense key: Aborted Command
[35909.872243] Additional sense: No additional sense information
[35909.872765] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[35909.872781] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[35909.874513] sda: Write Protect is off
[35909.874524] sda: Mode Sense: 11 00 00 00
[35909.874531] sda: assuming drive cache: write through
[35909.874661] sd 6:0:0:0: Attached scsi disk sda
[35909.874761] sd 6:0:0:0: Attached scsi generic sg0 type 0
[35916.819716] usb 3-2: USB disconnect, address 10
[35940.243711] usb 3-2: new high speed USB device using ehci_hcd and address 11
[35940.379988] usb 3-2: configuration #1 chosen from 1 choice
[35940.381493] scsi7 : SCSI emulation for USB Mass Storage devices
[35940.381643] usb-storage: device found at 11
[35940.381651] usb-storage: waiting for device to settle before scanning
[35945.380436] usb-storage: device scan complete
[35945.381403] Vendor: Model: Rev:
[35945.381436] Type: Direct-Access ANSI SCSI revision: 04
[35945.404740] sda: Unit Not Ready, sense:
[35945.404752] : Current: sense key: Aborted Command
[35945.404761] Additional sense: No additional sense information
[35945.405483] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[35945.405499] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[35945.407053] sda: Write Protect is off
[35945.407064] sda: Mode Sense: 11 00 00 00
[35945.407070] sda: assuming drive cache: write through
[35945.407196] sd 7:0:0:0: Attached scsi disk sda
[35945.407294] sd 7:0:0:0: Attached scsi generic sg0 type 0
[35954.619706] usb 3-2: USB disconnect, address 11
[35959.899682] usb 3-2: new high speed USB device using ehci_hcd and address 12
[35960.036115] usb 3-2: configuration #1 chosen from 1 choice
[35960.037635] scsi8 : SCSI emulation for USB Mass Storage devices
[35960.037788] usb-storage: device found at 12
[35960.037795] usb-storage: waiting for device to settle before scanning
[35965.036590] usb-storage: device scan complete
[35965.037550] Vendor: Model: Rev:
[35965.037581] Type: Direct-Access ANSI SCSI revision: 04
[35965.060389] sda: Unit Not Ready, sense:
[35965.060400] : Current: sense key: Aborted Command
[35965.060408] Additional sense: No additional sense information
[35965.061728] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[35965.061747] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[35965.062777] sda: Write Protect is off
[35965.062787] sda: Mode Sense: 11 00 00 00
[35965.062793] sda: assuming drive cache: write through
[35965.062920] sd 8:0:0:0: Attached scsi disk sda
[35965.063016] sd 8:0:0:0: Attached scsi generic sg0 type 0
[36023.415708] usb 3-2: USB disconnect, address 12
[36030.907847] ohci_hcd 0001:10:1b.1: wakeup
[36052.131671] usb 3-2: new high speed USB device using ehci_hcd and address 14
[36052.267835] usb 3-2: configuration #1 chosen from 1 choice
[36052.269490] scsi9 : SCSI emulation for USB Mass Storage devices
[36052.269639] usb-storage: device found at 14
[36052.269647] usb-storage: waiting for device to settle before scanning
[36057.268306] usb-storage: device scan complete
[36057.269241] Vendor: Model: Rev:
[36057.269273] Type: Direct-Access ANSI SCSI revision: 04
[36057.292232] sda: Unit Not Ready, sense:
[36057.292245] : Current: sense key: Aborted Command
[36057.292253] Additional sense: No additional sense information
[36057.293602] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[36057.293621] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[36057.294603] sda: Write Protect is off
[36057.294613] sda: Mode Sense: 11 00 00 00
[36057.294620] sda: assuming drive cache: write through
[36057.294748] sd 9:0:0:0: Attached scsi disk sda
[36057.294845] sd 9:0:0:0: Attached scsi generic sg0 type 0
[36082.383709] usb 3-2: USB disconnect, address 14
[36468.183670] usb 3-2: new high speed USB device using ehci_hcd and address 15
[36468.319789] usb 3-2: configuration #1 chosen from 1 choice
[36468.321418] scsi10 : SCSI emulation for USB Mass Storage devices
[36468.321569] usb-storage: device found at 15
[36468.321577] usb-storage: waiting for device to settle before scanning
[36473.320231] usb-storage: device scan complete
[36473.321165] Vendor: Model: Rev:
[36473.321196] Type: Direct-Access ANSI SCSI revision: 04
[36473.344415] sda: Unit Not Ready, sense:
[36473.344428] : Current: sense key: Aborted Command
[36473.344436] Additional sense: No additional sense information
[36473.345766] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[36473.345785] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[36473.346753] sda: Write Protect is off
[36473.346762] sda: Mode Sense: 11 00 00 00
[36473.346769] sda: assuming drive cache: write through
[36473.346896] sd 10:0:0:0: Attached scsi disk sda
[36473.346994] sd 10:0:0:0: Attached scsi generic sg0 type 0
[36473.991708] usb 3-2: USB disconnect, address 15
[36476.191848] ohci_hcd 0001:10:1b.1: wakeup
[36497.415770] usb 3-2: new high speed USB device using ehci_hcd and address 17
[36497.551984] usb 3-2: configuration #1 chosen from 1 choice
[36497.553491] scsi11 : SCSI emulation for USB Mass Storage devices
[36497.553653] usb-storage: device found at 17
[36497.553661] usb-storage: waiting for device to settle before scanning
[36502.552458] usb-storage: device scan complete
[36502.555455] Vendor: Model: Rev:
[36502.555488] Type: Direct-Access ANSI SCSI revision: 04
[36502.627432] sda: Unit Not Ready, sense:
[36502.627453] : Current: sense key: Aborted Command
[36502.627461] Additional sense: No additional sense information
[36502.628333] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[36502.628351] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[36502.631099] sda: Write Protect is off
[36502.631114] sda: Mode Sense: 11 00 00 00
[36502.631121] sda: assuming drive cache: write through
[36502.631768] sd 11:0:0:0: Attached scsi disk sda
[36502.632206] sd 11:0:0:0: Attached scsi generic sg0 type 0
[36735.555677] usb 3-1: new high speed USB device using ehci_hcd and address 18
[36735.693339] usb 3-1: configuration #1 chosen from 1 choice
[36735.693650] scsi12 : SCSI emulation for USB Mass Storage devices
[36735.693916] usb-storage: device found at 18
[36735.693923] usb-storage: waiting for device to settle before scanning
[36740.692413] usb-storage: device scan complete
[36740.693644] Vendor: Verbatim Model: USB Drive Rev: 2.00
[36740.693678] Type: Direct-Access ANSI SCSI revision: 02
[36741.764235] ready
[36741.766812] SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
[36741.767692] sdb: Write Protect is off
[36741.767713] sdb: Mode Sense: 03 00 00 00
[36741.767720] sdb: assuming drive cache: write through
[36741.779590] SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
[36741.783729] sdb: Write Protect is off
[36741.783744] sdb: Mode Sense: 03 00 00 00
[36741.783751] sdb: assuming drive cache: write through
[36741.783764] sdb: unknown partition table
[36741.788639] sd 12:0:0:0: Attached scsi removable disk sdb
[36741.788749] sd 12:0:0:0: Attached scsi generic sg1 type 0
[36742.752151] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[36832.335705] usb 3-2: USB disconnect, address 17
[36838.371669] usb 3-2: new high speed USB device using ehci_hcd and address 19
[36838.508638] usb 3-2: configuration #1 chosen from 1 choice
[36838.510224] scsi13 : SCSI emulation for USB Mass Storage devices
[36838.510389] usb-storage: device found at 19
[36838.510396] usb-storage: waiting for device to settle before scanning
[36843.509115] usb-storage: device scan complete
[36843.510059] Vendor: Model: Rev:
[36843.510091] Type: Direct-Access ANSI SCSI revision: 04
[36843.533539] sda: Unit Not Ready, sense:
[36843.533552] : Current: sense key: Aborted Command
[36843.533560] Additional sense: No additional sense information
[36843.534906] sda: too big for this kernel. Use a kernel compiled with support for large block devices.
[36843.534924] SCSI device sda: 0 512-byte hdwr sectors (0 MB)
[36843.535694] sda: Write Protect is off
[36843.535704] sda: Mode Sense: 11 00 00 00
[36843.535710] sda: assuming drive cache: write through
[36843.535857] sd 13:0:0:0: Attached scsi disk sda
[36843.535957] sd 13:0:0:0: Attached scsi generic sg0 type 0