; PSR-produced config file (stock default in CAPS)
; Note, if you're worried you messed up a setting, removing the line will have
; ZSNES use the default settings for that option.
; The next time ZSNES is run, the line will reappear with the default settings.
; ----
; -- Input --
; ----
; For other input settings see zinput.cfg
; Enable Game-Specific Key Combos (0 = NO, 1 = Yes)
GUIComboGameSpec=1
; Enable Game-Specific Key Input (0 = NO, 1 = Yes)
GameSpecificInput=0
; ----
; -- Options --
; ----
; Allow MMX Support (0 = No, 1 = YES)
; Disable this only if you actually do NOT have a processor that supports MMX.
; Disabling this option will prevent you from using some of the more advanced
; video/sound filters.
AllowMMX=1
; Pause Emulation when ZSNES is Out of Focus (0 = NO, 1 = Yes)
PauseFocusChange=0
; Increase Priority of ZSNES (0 = NO, 1 = Yes)
; Enable this if it improves performance. This option is not for everyone.
; This may cause other background apps to be sluggish.
; The priority in Win9x will be High, Win2k will be Above Normal.
HighPriority=0
; Disable Power Management while ZSNES Runs (0 = No, 1 = YES)
; This is very necessary for gamepad users.
DisableScreenSaver=1
; Enable New Graphics Engine (0 = No, 1 = YES)
; Toggle off when there are graphical problems in the new graphics engine
newengen=1
; Enable Older Graphics Engine Tweak for Mode 2 (0 = NO, 1 = Yes)
; Enable this to see if it helps with rendering problems
; Only works with old graphic engine
bgfixer=0
; Snapshot Format (0 = BMP, 1 = PNG)
ScreenShotFormat=0
; Auto-Patch ROM with IPS (0 = No, 1 = YES)
AutoPatch=1
; Display ROM Info on Load (0 = No, 1 = YES)
DisplayInfo=1
; Log Info About the Last ROM Loaded to rominfo.txt (0 = No, 1 = YES)
RomInfo=1
; Enable FPS Counter when ZSNES is Started (0 = NO, 1 = Yes)
; This option is disabled when manual frameskip is in use.
FPSAtStart=0
; Display Clock (0 = NO, 1 = Yes)
TimerEnable=0
; Change Clock Mode (0 = 24 HOUR, 1 = 12 Hour)
TwelveHourClock=0
; Display Black Box Around Clock (0 = No, 1 = YES)
ClockBox=1
; Use Small Font for Messages (0 = NO, 1 = Yes)
SmallMsgText=0
; Transparent Messages - doesn't work with small font (0 = NO, 1 = Yes)
GUIEnableTransp=0
; ----
; -- Video --
; ----
; Video Mode [0..42]
; 0 = 256x224 R WIN 1 = 256x224 R FULL
; 2 = 512x448 R WIN 3 = 512x448 DR WIN
; 4 = 640x480 S WIN 5 = 640x480 DS WIN
; 6 = 640x480 DR FULL 7 = 640x480 DS FULL
; 8 = 640x480 S FULL 9 = 768x672 R WIN
; 10 = 768x672 DR WIN 11 = 800x600 S WIN
; 12 = 800x600 DS WIN 13 = 800x600 S FULL
; 14 = 800x600 DR FULL 15 = 800x600 DS FULL
; 16 = 1024x768 S WIN 17 = 1024x768 DS WIN
; 18 = 1024x768 S FULL 19 = 1024x768 DR FULL
; 20 = 1024x768 DS FULL 21 = 1024x896 R WIN
; 22 = 1024x896 DR WIN 23 = 1280x960 S WIN
; 24 = 1280x960 DS WIN 25 = 1280x960 S FULL
; 26 = 1280x960 DR FULL 27 = 1280x960 DS FULL
; 28 = 1280x1024 S WIN 29 = 1280x1024 DS WIN
; 30 = 1280x1024 S FULL 31 = 1280x1024 DR FULL
; 32 = 1280x1024 DS FULL 33 = 1600x1200 S WIN
; 34 = 1600x1200 DS WIN 35 = 1600x1200 DR FULL
; 36 = 1600x1200 DS FULL 37 = 1600x1200 S FULL
; 38 = CUSTOM D WIN 39 = CUSTOM DS FULL
; 40 = CUSTOM WIN 41 = CUSTOM S FULL
; 42 = CUSTOM DR FULL
; You need to select one of the custom video modes and modify CustomResX/Y to
; properly use custom res support.
; WARNING: Custom resolutions are only valid if they are supported by your system!
; ZSNES will hang if an invalid fullscreen resolution is used.
cvidmode=14
; Last windowed & fullscreen modes (used when alt-tabbing)
PrevWinMode=2
PrevFSMode=14
; Custom Resolution X and Y for Custom Video Modes [256x224..2048x1536]
CustomResX=640
CustomResY=480
; Enable Video Interpolation (0 = NO, 1 = Yes)
; Video Interpolation is compatible with scanlines.
; Blends the neighboring pixels on the screen to eliminate pixelation.
antienab=0
; Enable NTSC Filter (0 = NO, 1 = Yes)
; Enable Blargg's wonderful NTSC filter which simulates the artifacts of an
; NTSC TV set - it is probably not a good idea to use with TV-out
; Recommended to use a minimum res of 602x448
NTSCFilter=0
; Blend Frames, Refresh Screen (0 = OFF, 1 = On)
; Blend Frames allows smoother transitions between frames for non-60Hz refresh rates.
; Refresh Screen allows the screen to be updated while changing the filter's parameters.
NTSCBlend=0
NTSCRef=0
; NTSC TV Attributes [-100..100]
NTSCHue=0
NTSCSat=0
NTSCCont=0
NTSCBright=0
NTSCSharp=0
NTSCGamma=0
NTSCRes=0
NTSCArt=0
NTSCFringe=0
NTSCBleed=0
NTSCWarp=0
; Enable Kreed's 2x Filters (0 = NONE, 1 = 2xSaI, 2 = Super Eagle, 3 = Super 2xSaI)
; These are Kreed's various 2x filters. They do not exhibit the same level of
; blurring than interpolation/bilinear. MMX support is required.
; This is disabled when other filters are used.
En2xSaI=3
; Use HQ*x Filter (0 = NO, 1 = Yes)
; This is a filter MaxSt has created. These are very CPU intensive filters that
; do very awesome blending to remove the pixelation.
; This is disabled when other filters are used. MMX support is required.
hqFilter=0
; Set HQ*x level [2..4]
; Recommended min resolutions
; HQ2x = 512x448
; HQ3x = 768x672
; HQ4x = 1024x896
hqFilterlevel=2
; Enable Scanlines (0 = NONE, 1 = Full, 2 = 25%, 3 = 50%) - simulate TV scanlines
; This is compatible with interpolation.
scanlines=0
; Enable Grayscale Mode (0 = NO, 1 = Yes) - don't enable this for other than nostalgia
; The whole screen is displayed in monochrome color.
GrayscaleMode=0
; Enable High-Res Mode 7 (0 = NO, 1 = Yes)
; Doubles the internal resolution of the image when Mode 7 is in use
; However this disables most filters, except for interpolation.
; This is only useful in certain games and is not useful in general.
; Requires a minimum res of 512x448
Mode7HiRes16b=1
; Sync Frames to Monitor Refresh Rate (0 = NO, 1 = Yes)
; Do not enable if you cannot normally sustain 60fps
vsyncon=1
; Use Triple Buffering (0 = NO, 1 = Yes) - replaces vsync
; This is usually more beneficial than VSync.
; This is not available in Windowed modes.
TripleBufferWin=1
; Force Refresh Rate (0 = NO, 1 = Yes)
; Enable this if you are experiencing visual tearing
; WARNING: Setting a refresh rate that your monitor cannot handle will have
; consequences! The DX Refresh Rate Override in dxdiag must be set to default
; in order for this to work! The refresh rate is only valid if it is supported
; by your system! This option is only useful in fullscreen modes.
ForceRefreshRate=0
SetRefreshRate=60
; Enable KitchenSync/KitchenSyncPAL (0 = NO, 1 = Yes)
; When enabled, ZSNES will use double the refresh rate of the game and use
; half of it to sync with the game to reduce/prevent visual tearing.
; You can enable this if your video card/monitor AND current ZSNES resolution
; supports 100Hz (for PAL games) and 120Hz (for NTSC games)
; KitchenSyncPAL applies to PAL games only, use KitchenSync for PAL+NTSC games.
; WARNING: The DX Refresh Rate Override in dxdiag must be set to default in
; order for this to work!
; This option is completely useless in a non-fullscreen mode.
KitchenSync=0
KitchenSyncPAL=0
; Keep 4:3 Ratio (0 = No, 1 = YES)
; This is particularly handy for those that use laptops/LCDs+non 4:3 resolutions.
; This can be used for any S/DS mode and any Custom Windowed mode.
; It is not recommended to enable this while under 298x224.
; Disable this if you want to use the non-standard ratio instead.
Keep4_3Ratio=1
; Set Gamma Level [0..15]
gammalevel=0
; ----
; -- Sound --
; ----
; Disable SPC Emulation (0 = NO, 1 = Yes)
; Disabling SPC emulation can improve performance, but at the expense of
; emulation accuracy. There will be no sound output and games might crash.
SPCDisable=0
; Enable Sound Emulation (0 = Off, 1 = ON) - disable if you need the performance
; If SPC emulation is disabled, there will be no sound output.
soundon=1
; Enable Stereo Sound (0 = Off, 1 = ON) - disable if you need the performance
StereoSound=1
; Swap Left Audio Channel w/Right (0 = NO, 1 = Yes)
RevStereo=0
; Simulate Surround Sound (0 = NO, 1 = Yes)
; Enable a simulated 2 speaker surround sound effect.
; Do not enable if playing a game that has its own surround sound effects.
; Stereo Sound must be enabled for this to work.
Surround=0
; Use Primary Sound Buffer (0 = NO, 1 = Yes)
; Enable this if you are experiencing sound playback/static problems.
PrimaryBuffer=0
; Sampling Rate: (0 = 8000Hz, 1 = 11025Hz, 2 = 22050Hz, 3 = 44100Hz,
; 4 = 16000Hz, 5 = 32000Hz, 6 = 48000Hz)
; Using any other sound frequencies other than the default 32000Hz
; is COMPLETELY UNACCEPTABLE in use for sound bug reports.
SoundQuality=5
; Sound Volume Level [0..100]
MusicRelVol=100
; Enable Sound Interpolation (0 = None, 1 = GAUSSIAN, 2 = Cubic, 3 = 8-point)
; Sound interpolation smooths out the waveform of lower frequency sounds.
; Using any other setting other than the default Gaussian interpolation is
; COMPLETELY UNACCEPTABLE in sound bug reports.
SoundInterpType=1
; Enable Low-Pass Filter (0 = NONE, 1 = Simple, 2 = Dynamic, 3 = Hi-quality)
; A low-pass filter improves the bass in the sounds.
; This is useful if you have a Subwoofer.
LowPassFilterType=0
; Disable Echo (0 = NO, 1 = Yes)
; Disables the echo effect in the sound.
EchoDis=0
; ----
; -- Saves --
; ----
; Number of Rewind States [0..99]
RewindStates=8
; Delay between rewinds [1..99] - (1 = 200ms, 5 = 1s, 10 = 2s)
RewindFrames=15
; Don't Save SRAM (0 = NO, 1 = Yes)
; Only enable this if you don't want to Save SRAM at any given time.
; This option will make Update SRAM in Real-Time useless.
nosaveSRAM=0
; Update SRAM in Real-Time (0 = NO, 1 = Yes)
; This is useful if you fear something will prevent ZSNES from exiting normally.
; It is required to play games that store important values directly to SRAM.
; ZSNES normally updates SRAM on exit.
; If Don't Save SRAM is enabled, this option is useless.
SRAMSave5Sec=1
; Load SRAM w/Savestates (0 = No, 1 = YES)
; Enable this when you want to use the SRM that is stored within the savestate.
; Warning: You will overwrite the existing SRM that you are currently using.
; It is required to properly use states with games storing important values
; directly in SRM.
SRAMState=1
; Select Latest Save State Slot on Game Load (0 = NO, 1 = Yes)
; Enable this if you want to load the last saved savestate quickly
; (via the load savestate button/GUI option) after loading the game.
LatestSave=1
; Auto Increment State Slot First, then Save State (0 = NO, 1 = Yes)
; Enable this if you have a tendency in saving accidentally to an existing
; savestate.
AutoIncSaveSlot=0
; Save in 10 save block (0 = NO, 1 = Yes)
; This may be handy if you want to save within a block (0-9, 10-19, etc.)
AutoIncSaveSlotBlock=0
; Auto State Save/Load (0 = NO, 1 = Yes) - uses a special state
; Enable this if you wish a special state to be saved on a visit to the GUI.
; This state will automatically be loaded when you load a game.
AutoState=0
; Pause Emulation After Loading a Save State (0 = NO, 1 = Yes)
PauseLoad=0
; Pause Emulation After Using Rewind (0 = NO, 1 = Yes)
PauseRewind=0
; ----
; -- Emulation --
; ----
; Percent to Execute [50..150] - only modify if you know what you are doing
; Changing this value may help certain games run.
per2exec=100
; Disable Hacks (0 = NO, 1 = Yes)
; Set this to 1 if you want to disable game specific hacks
HacksDisable=0
; Frameskip: [0..10] (0 = AUTO, 1-10 = Manual 0-9)
frameskip=0
; Max Frameskip Allowed for Auto Frameskip [0..9]
maxskip=9
; Fastforward/Slowdown Keys Behaviour (0 = HELD, 1 = Toggle)
FastFwdToggle=0
; Fastforward/Slowdown Factors [0..28] (0 = factor 2, 28 = factor 30)
FFRatio=8
SDRatio=0
; Emulation Speed Throttle [0..58] (0 = speed/30, 29 = 1x, 58 = 30x)
; Fast-forward multiplicator is currently inaccurate
EmuSpeed=29
; ----
; -- Paths --
; ----
; It is suggested to go to GUI->Paths and modify the paths from there.
; ROMs drive + directory
; Note, when entering a path, make sure every backslash is doubled
; "C:\Games\SNES" for example is incorrect.
; "C:\\Games\\SNES" is correct.
ROMPath="\\\\dev\\roms\\"
; Save states & SRAMs, snapshots, SPCs
SRAMPath="C:\\Documents and Settings\\henrik\\Application Data\\zsnes\\saves\\"
SnapPath=""
SPCPath=""
; BIOS/base carts (BS-X, Sufami Turbo, Same Game & SD Gundam G-Next)
BSXPath=""
STPath=""
SGPath=""
GNextPath=""
; SPC7110 graphic packs
FEOEZPath=""
SJNSPath=""
MDHPath=""
SPL4Path=""
; ----
; -- GUI --
; ----
; Disable GUI (0 = NO, 1 = Yes)
guioff=0
; Show All Files in 'Load Game' Menu (0 = NO, 1 = Yes)
showallext=0
; Filename Display Mode (0 = LONG FILENAME, 1 = Internal header name)
GUIloadfntype=0
; Recent games played, you shouldn't edit this manually (8.3 / Paths / LFN)
prevloadiname="marpg_e.smc.gz"\0". "\"marpg_e.smc.gz"\0"R\" "
prevloaddnamel=0"! "\"\\\\dev\\roms\\"\0"?% "\"R:\\"\0"|P "
prevloadfnamel="marpg_e.smc.gz"\0"<% "\"marpg_e.smc.gz"\0"rP "
; Freeze Recent Games List (0 = NO, 1 = Yes)
prevlfreeze=0
; Right Mouse Click Enters/Exits GUI (0 = NO, 1 = Yes)
GUIRClick=0
; Left Handed Mouse Behavior for GUI (0 = NO SWAP, 1 = Swap)
; (swap left and right buttons)
lhguimouse=0
; Show Mouse Cursor Shadow (0 = No, 1 = YES)
; Displays a shadow under the mouse cursor.
mouseshad=1
; Wrap Mouse Cursor (0 = NO, 1 = Yes)
; If enabled, the cursor will wrap around to the other side.
; Only useful for Fullscreen modes.
mousewrap=0
; Trap Mouse Cursor in Window (0 = NO, 1 = Yes)
; Only useful in Windowed modes.
TrapMouseCursor=0
; Use Mouse Wheel to Scroll (0 = No, 1 = YES)
MouseWheel=1
; ESC to Game Menu (0 = No, 1 = YES)
; If yes, visiting the GUI will have the Game Menu automatically selected.
; It will also enable the main menu keyboard shortcuts.
esctomenu=1
; Control the GUI Using Gamepad 1 (0 = NO, 1 = Yes)
JoyPad1Move=0
; Filter GUI Display (0 = No, 1 = YES)
; If enabled, the current filter you are using will also filter the GUI.
FilteredGUI=1
; Use Custom Font (0 = NO, 1 = Yes)
; The font currently reads off a format as defined by zfile.txt
newfont=0
; Save GUI Window Positions (0 = NO, 1 = Yes)
savewinpos=0
; GUI windows X/Y coordinates - GUI setup showing windows #
; Game Config Cheat Netplay Misc
; -------------------------------------------------------------------
; 1:Load 3:Input 7:Add Code [Internet] 9:Misc Keys
; Run ------- 7:Browse 10:GUI Opts
; 12:Reset 17:Devices 13:Search 15:Movie Opt
; ------- 18:Chip Cfg 16:Key Comb.
; 14:Save State ------- Save Cfg
; 2:Open State 4:Options -------
; 14:Pick State 5:Video 11:About
; ------- 6:Sound
; Quit 19:Paths
; 20:Saves
; 21:Speed
; X positions [-233..254] (windows #0 to #22)
GUIwinposx=0,6,65,33,42,5,34,6,64,8,10,33,56,64,56,5,3,28,48,6,28,53,0
; Y positions [8..221] (windows #0 to #22)
GUIwinposy=0,20,70,20,20,20,20,20,30,30,19,20,60,30,60,20,20,60,60,20,30,20,0
; GUI Background Effect
; (0 = NONE, 1 = Snow, 2 = Water A, 3 = Water B, 4 = Burn, 5 = Smoke)
GUIEffect=0
; GUI Palette Mods:
; Background RGB Tint [0..31]
GUIRAdd=1
GUIGAdd=1
GUIBAdd=1
; Titlebar RGB Tint [0..31]
GUITRAdd=0
GUITGAdd=10
GUITBAdd=31
; Windows RGB Tint [0..31]
GUIWRAdd=8
GUIWGAdd=8
GUIWBAdd=25
; Main Window Always on Top (0 = NO, 1 = Yes)
AlwaysOnTop=0
; Save Main Window Position (0 = No, 1 = YES) and X/Y coordinates
SaveMainWindowPos=1
MainWindowX=384
MainWindowY=176
; Allow Multiple ZSNES Instances at Once (0 = No, 1 = YES)
AllowMultipleInst=0
; ----
; -- Cheats --
; ----
; Autoload .CHT files (0 = NO, 1 = Yes)
; Enable the use of stored cheat files on load.
AutoLoadCht=1
; Selected Size Search (0 = 1 BYTE, 1 = 2B, 2 = 3B, 3 = 4B)
CheatSrcByteSize=0
; Selected Numerical Base (0 = DECIMAL, 1 = Hexadecimal)
CheatSrcByteBase=0
; Search Type (0 = EXACT VALUE, 1 = Comparative)
CheatSrcSearchType=0
; Add Code for Most Significant Byte Only (0 = NO, 1 = Yes)
CheatUpperByteOnly=0
; ----
; -- Movies --
; ----
; For other input settings see zmovie.cfg
; Display Movie Frame # During Record/Replay (0 = NO, 1 = Yes)
MovieDisplayFrame=0
; Movie Default Start Method (0 = NOW, 1 = Power-On,
; 2 = Reset, 3 = Power-On without SRAM)
MovieStartMethod=0
; Switch Modes when Loading a Movie State (0 = NO, 1 = Switch to Record, 2 = Switch to Playback)
MZTForceRTR=0
; ZMV -> AVI Conversion Mode: (0 = No Video, 1 = Raw Video, 2 = Ffv1, 3 = x264,
; 4 = XVID, 5 = Custom)
; The compression codecs can only be used if you provide them yourself.
; See zmovie.cfg for details.
MovieVideoMode=4
; Dump Audio Along w/Video (0 = No, 1 = YES)
MovieAudio=1
; Compress Audio Stream On-The-Fly (0 = No, 1 = YES)
; The compression codecs can only be used if you provide them yourself.
; See zmovie.cfg for details.
MovieAudioCompress=1
; Merge Audio and Video Streams Upon Conversion End (0 = No, 1 = YES)
MovieVideoAudio=1
; ----
; -- Keyboard Hotkeys --
; ----
; (you shouldn't edit these directly unless you know what you're doing)
; Super Scope Keys:
; Extra Device in Port 1/2 Cycle
KeyExtraEnab1=0
KeyExtraEnab2=0
; State Keys:
; Save State / Select Slot Menu / Load State
KeySaveState=60
KeyStateSelct=61
KeyLoadState=62
; Increase / Decrease Slot # / Direct Slot # Select
KeyIncStateSlot=0
KeyDecStateSlot=0
KeyStateSlc0=0
KeyStateSlc1=0
KeyStateSlc2=0
KeyStateSlc3=0
KeyStateSlc4=0
KeyStateSlc5=0
KeyStateSlc6=0
KeyStateSlc7=0
KeyStateSlc8=0
KeyStateSlc9=0
; Rewind
KeyRewind=0
; Speed Keys:
; Fast-Forward, Slow-Motion
KeyFastFrwrd=41
KeySlowDown=0
; Frame Rate Up/Down (Manual Frameskip)
KeyFRateUp=0
KeyFRateDown=0
; Speed Throttle Up/Down/Reset to Normal (Auto Frameskip)
KeyEmuSpeedUp=0
KeyEmuSpeedDown=0
KeyResetSpeed=0
; Pause Emulation, Frame Advance Keys
EMUPauseKey=25
INCRFrameKey=0
; Shortcuts:
; BG 0-3, Sprite Layer Display Toggles
KeyBGDisble0=2
KeyBGDisble1=3
KeyBGDisble2=4
KeyBGDisble3=5
KeySprDisble=6
; Sound Channel 0-7 Output Toggles
KeyDisableSC0=63
KeyDisableSC1=64
KeyDisableSC2=65
KeyDisableSC3=66
KeyDisableSC4=67
KeyDisableSC5=68
KeyDisableSC6=87
KeyDisableSC7=88
; Sound Volume Up/Down
KeyVolUp=0
KeyVolDown=0
; Quit ZSNES / Load Menu / Reset Game / Panic Key
KeyQuickExit=0
KeyQuickLoad=0
KeyQuickRst=0
KeyResetAll=7
; Clock Display Toggle
KeyQuickClock=0
; Netplay In-Game Chat
KeyQuickChat=20
; Screenshot Hotkey
KeyQuickSnapShot=0
; Capture SPC Hotkey
KeyQuickSaveSPC=0
; Use Player 3/4 Input as Player 1/2's Toggle
KeyUsePlayer1234=0
; FPS Display Toggle
KeyDisplayFPS=0
; Laptop Battery Display Toggle
KeyDisplayBatt=0
; Video Engine: Old/New Graphic Engine | Windowing | Offset Effects Toggles
KeyNewGfxSwt=9
KeyWinDisble=10
KeyOffsetMSw=11
; Gamma Correction Up/Down
KeyIncreaseGamma=0
KeyDecreaseGamma=0
; Movie Chapters: Insert / Go to Previous / Go to Next
KeyInsrtChap=0
KeyPrevChap=0
KeyNextChap=0
; Movie state load mode cycle
KeyRTRCycle=0
; ----
; -- Misc --
; ----
; Calculated Checksum & Hash: Don't Edit by Hand !
TimeChecker=181
PrevBuildNum=0
; Display First-Time Use Reminder (0 = YES, 1 = No)
FirstTimeData=1
; Enable Debugger (0 = NO, 1 = Yes)
debuggeron=0
; Prevent ZSNES from Saving the Configuration on Exit (0 = NO, 1 = Yes)
cfgdontsave=0
; - EOF -