rendered paste bodyLinux version (gs@gs) (gcc version 3.4.4) #1 Fri Feb 24 07:51:41 EST 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: D-Link DSM-G600
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: noirqdebug console=ttyS0,115200n8 root=/dev/sda1 rootfstype=ext2 rootdelay=12
PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62628KB available (1901K code, 176K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using indirect access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:03.0 on pci bus
IXP4xx: FREQ=66000000 COUNT=660001
dmabounce: registered device 0000:00:03.1 on pci bus
dmabounce: registered device 0000:00:03.2 on pci bus
dmabounce: registered device 0000:00:04.0 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250 serial8250.0: unable to register port at index 1 (IO0 MEMc8001000 IRQ13): -28
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
PCI: enabling device 0000:00:04.0 (0140 -> 0143)
PCI: Via IRQ fixup for 0000:00:04.0, from 23 to 7
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:13:46:48:04:65
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1450 ctl 0x1462 bmdma 0x1440 irq 24
ata2: PATA max UDMA/100 cmd 0x1458 ctl 0x1466 bmdma 0x1448 irq 24
ATA: abnormal status 0x7F on port 0x1457
ata1: disabling port
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x145F
ata2: disabling port
scsi1 : pata_artop
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
RedBoot directory 0x50fe0000(0x20000) native
7 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 7 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00240000 : "kernel"
0x00240000-0x00840000 : "filesystem"
0x00840000-0x00ec0000 : "usr"
0x00f00000-0x00fc0000 : "sysconfig"
0x00fc0000-0x00fc1000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
0x00fe0000-0x01000000 : "FIS directory"
Using configured DiskOnChip probe address 0x50000000
PCI: enabling device 0000:00:03.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:03.2, from 25 to 9
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 25, io mem 0x48010000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: over-current change on port 2
Initializing USB Mass Storage driver...
hub 1-0:1.0: over-current change on port 3
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb 1-4: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 12sec before mounting root device...
Vendor: Generic Model: STORAGE DEVICE Rev: 9312
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1 sda2
sd 2:0:0:0: Attached scsi removable disk sda
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 96K
Kernel panic - not syncing: Attempted to kill init!
FATAL: kernel too old