# ***************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# ***************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit XFree86-DGA" # don't initialize the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
# Disable for AIGLX
# Load "GLcore"
EndSection
# *****************************************************************
# Files section. This allows default font and rgb paths to be set
# *****************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
FontPath "/usr/share/fonts/freefont/"
FontPath "/usr/share/fonts/sharefonts/"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
FontPath "/usr/share/fonts/artwiz/"
FontPath "/usr/share/fonts/unifont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# ***********************************************************
# Server flags section.
# ***********************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in a unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). THis allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune client. With
# ith the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidTune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# ********************************************************
# Input devices
# ********************************************************
# ********************************************************
# Core keyboard's InputDevice section
# ********************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customize the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layour can be obtained with:
# Option "Xkblayout" "de"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
# Option "XkbVariant" "n"
EndSection
# ************************************************************
# Core Pointer's InputDevice section
# ************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
# This is for my laptop's USB mouse
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "Auto"
# Option "Device" "/dev/mouse2"
# EndSection
# **************************************************************
# Monitor section
# **************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Laptop LCD"
VendorName "Asus"
Option "DPMS"
EndSection
# ***************************************************************
# Graphics device section
# ***************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# My ATI Mobility Radeon x700
Section "Device"
Identifier "ATI Radeon Mobility x700"
# Driver "radeon"
# Driver "ati"
Driver "fglrx"
Option "RenderAccel" "true"
# Option "XAANoOffscreenPixmaps" "true"
# Option "DRI" "true"
# VideoRam ""
Option "UseInternalAGPGart" "no"
Option "KernelModuleParm" "agplock=0"
# Option "MonitorLayout" "LVDS"
# Option "VideoOverlay" "on"
# Option "DynamicClocks" "on"
# Option "AccelMethod" "exa"
# Option "MigrationHeuristic" "greedy"
# Option "FBTexPercent" "50"
# Option "ColorTiling" "on"
# Option "EnablePageFlip" "off"
# Option "GARTSize" "64"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X700 (PCIE)"
# BusID "PCI:1:0:0"
EndSection
# ***********************************************************
# Screen sections
# ***********************************************************
# Any number of screen sections may be present.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon Mobility x700"
Monitor "Laptop LCD"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1360x1050" "1360x1024" "1360x768" "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1360x1050" "1360x1024" "1360x768" "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1360x1050" "1360x1024" "1360x768" "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubSection
EndSection
# ***********************************************************
# ServerLayout sections
# ***********************************************************
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
# Option "AIGLX" "true"
EndSection
# Section "DRI"
# Group 0
# Mode 0666
# EndSection
# Section "Extensions"
# Option "Composite" "Enable"
# EndSection