rendered paste bodysmartctl --all /dev/hdasmartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Model Family: Toshiba 2.5" HDD series (80 GB and above)Device Model: TOSHIBA MK8025GASSerial Number: 95IO4788TFirmware Version: KA022KUser Capacity: 80,026,361,856 bytesDevice is: In smartctl database [for details use: -P show]ATA Version is: 6ATA Standard is: Exact ATA specification draft version not indicatedLocal Time is: Fri Apr 6 11:04:58 2007 ISTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offlinedata collection: ( 375) seconds.Offline data collectioncapabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. No General Purpose Logging support.Short self-test routinerecommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 75) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1572 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2177 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 7740 10 Spin_Retry_Count 0x0033 142 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1593191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 199192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 181193 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 354490194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 44 (Lifetime Min/Max 11/63)196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1220 Disk_Shift 0x0002 100 100 000 Old_age Always - 103222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6342223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0224 Load_Friction 0x0022 100 100 000 Old_age Always - 0226 Load-in_Time 0x0026 100 100 000 Old_age Always - 216240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0SMART Error Log Version: 1ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 1 occurred at disk power-on lifetime: 7606 hours (316 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 0a ec af e4 Error: ICRC, ABRT 1 sectors at LBA = 0x04afec0a = 78638090 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 38 d3 eb af e4 00 03:36:24.742 READ DMA c8 00 08 cb eb af e4 00 03:36:24.742 READ DMA c8 00 38 d3 cf af e4 00 03:36:24.741 READ DMA c8 00 08 cb cf af e4 00 03:36:24.723 READ DMA c8 00 08 0f ab e6 e6 00 03:36:24.702 READ DMASMART Self-test log structure revision number 1No self-tests have been logged. [To run self-tests, use: smartctl -t]Device does not support Selective Self Tests/Logging