rendered paste bodyU-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc.
CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache
Board: Sandpoint 8245 Unity ##Test not implemented yet##
I2C: ready
DRAM: 64 MB
FLASH: S29GL128N, 16 MB
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
## Booting image at ff000000 ...
Image Name: QNAP Linux-2.6.12.3
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1932980 Bytes = 1.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff200000 ...
Image Name: QNAP RAM Disk
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 2842607 Bytes = 2.7 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 03c77000, end 03f2cfef ... OK
Linux version 2.6.12.3 (root@NasPPC.qnap.com.tw) (gcc version 3.4.3) #1 Mon Feb 12 14:04:38 CST 2007
Motorola SPS Sandpoint Test Platform
Port by QNAP Systems, Inc. (sales@qnap.com.tw)
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 root=/dev/ram
OpenPIC Version 1.2 (1 CPUs and 10 IRQ sources) at fdf40000
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 57968k available (2520k kernel code, 1376k data, 104k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2775k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/W].
i8042.c: i8042 controller self test timeout.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 1 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 25) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
libata(0000:00:0d.0): cache line size not set. Driver may not function
libata 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix
create proc entry succeed!
ata1: SATA max UDMA/100 cmd 0xC5000E80 ctl 0xC5000E8A bmdma 0xC5000E00 irq 16
ata2: SATA max UDMA/100 cmd 0xC5000EC0 ctl 0xC5000ECA bmdma 0xC5000E08 irq 16
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : libata
ata2: no device found (phy stat 00000000)
scsi1 : libata
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: unknown partition table
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
physmap flash device: 1000000 at ff000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition definition
Creating 7 MTD partitions on "phys_mapped_flash":
0x00f00000-0x00f40000 : "U-Boot"
0x00000000-0x00200000 : "Kernel"
0x00200000-0x00500000 : "RootFS1"
0x00500000-0x00e00000 : "RootFS2"
0x00e00000-0x00f00000 : "Vendor"
0x00f40000-0x00f60000 : "U-Boot Config"
0x00f60000-0x01000000 : "NAS Config"
ehci_hcd 0000:00:0e.2: NEC Corporation USB 2.0
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00
ehci_hcd 0000:00:0e.2: park 0
ehci_hcd 0000:00:0e.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:0e.0: NEC Corporation USB
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0e.1: NEC Corporation USB (#2)
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
create proc entry succeed!
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 4
NET: Registered protocol family 5
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 104k init
Recover device node....
dd: /dev/sda4: No such device or address
sysinfo: Module loaded.
I2C: No RXAK
i2c-s3531a: i2c S-3531A/S-353X0A driver, (C) 2001-2005 Copyright QNAP Systems, Inc.
rs5c372a: module license 'unspecified' taints kernel.
I2C: Initialize rs5c372a RTC ok
eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xbffe00, 00:33:44:55:66:77, IRQ 18
eth0: Auto-negotiation Enabled.
Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Linked
Link Speed:100Mbps
Duplex mode:Full-Duplex
I/O Base:0xBFFE00(I/O port)
IRQ:18
initializing MAC address...
Initializing main disk...
log hidden config directory not exist, initial 10K log file... [OK]
Starting Disk initialized:
Checking plugged storage...
Checking e-sata: Not exist
NAS8A6C1C
[: unknown operand
Stopping network...Stopped.
Starting network...DHCP
Speed: 100
ddns update.
add successInitializing random number generator... done.
Starting thttpd services: thttpd.
Starting Qthttpd services: Qthttpd.
Starting FTP services: proftpd.
Starting btd daemon...
Starting ImRd service:
msgget: Calling msgget(7843,950)
msgget: msgget succeeded: msgid = 65538
.
Starting periodic command scheduler: Apr 5 04:55:10 crond[521]: crond 2.3.2 dillon, started, log level 9
crond.
use PIC1 as default image
Starting ntpdate daemon:
Starting stunnel services:2007.04.05 04:55:13 LOG7[569:1024]: RAND_status claims sufficient entropy for the PRNG
2007.04.05 04:55:13 LOG6[569:1024]: PRNG seeded successfully
2007.04.05 04:55:13 LOG4[569:1024]: Wrong permissions on /etc/stunnel/stunnel.pem
2007.04.05 04:55:13 LOG7[569:1024]: Certificate: /etc/stunnel/stunnel.pem
2007.04.05 04:55:13 LOG7[569:1024]: Key file: /etc/stunnel/stunnel.pem
2007.04.05 04:55:13 LOG7[569:1024]: SSL context initialized for service https
stunnel.
Starting TwonkyMedia: disabled.
Starting iTune Services: disabled.
Starting rsync server...
EXT2-fs warning: checktime reached, running e2fsck is recommended
Starting autorun script:
telnetd: starting
port: 13131; login program: /bin/naslogin
Starting AppleTalk Services: disabled.
Starting optwareldconfig: Remove `/lib' from `/etc/ld.so.conf'
ldconfig: Remove `/usr/lib' from `/etc/ld.so.conf'
ldconf
Welcome to QNAP Systems Inc,. uClibc(192.168.1.34) development environment.
NAS8A6C1C login: