# =========================================================================
# $Id: vhosts.conf 43 2005-10-31 00:10:10Z s0undt3ch $
# =========================================================================
# Please read the README and FAQ for more info.
#
# Use this file to set up servers on machines behind your
# gateway. Use this format:
# allowedhost:virtualhostIP:originalport:destinationport:protocol
# where allowedhost is an IP address or subnet, or 0/0 to
# allow the whole world access.
#
# Ports and protocols are semi-optional. If you omit originalport
# you must also omit destinationport, and all traffic matching
# protocol will be forwarded, and protocol is not optional. If
# originalport and destinationport are specified but protocol is
# not, both tcp and udp ports will be forwarded.
#
# Examples:
#0/0:10.10.2.5:40:80:tcp
#0/0:10.10.2.5:40:80:udp
0/0:10.10.2.5:443:80:udp
0/0:10.10.2.5:443:80:tcp
#0/0:192.168.0.10:7777-7788:7777-7788:udp # UT or UT2k3 on 192.168.0.10
#0/0:192.168.0.10:28902:28902:udp # UT or UT2k3 on 192.168.0.10
#0/0:192.168.0.10:8000:8000:tcp # UT or UT2k3 on 192.168.0.10 (web admin)
#0/0:192.168.0.10:5120-5300:5121:udp # NWN server
#0/0:192.168.0.10:6881-6889:6881-6889:tcp # Bittorrent
#0/0:192.168.0.10:1241:1241:tcp # nessus server
#0/0:192.168.0.10:28765:28765: # cube
#0/0:192.168.0.10:6436:6436:tcp # gnutella
#0/0:192.168.0.10:2234-2235:2234-2235: # Operation FlashPoint
#0/0:192.168.0.10:2300-2400:2300-2400:tcp # m$fs and OFP
#0/0:192.168.0.10:6073:6073:tcp # m$fs and OFP
#0/0:192.168.0.10:47624:47624:tcp # m$fs and OFP
#0/0:192.168.0.10:49000:49000: # xplane
#0/0:192.168.0.10:4000:4000:tcp # To enable file icq file xfer, config
#0/0:192.168.0.10:4000-4100:4000-4100:tcp # icq to listen on ports 4000-4100 (default)