rendered paste bodyLinux version 2.6.9-42.ELsmp (buildcentos@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Sat Aug 12 09:39:11 CDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
BIOS-e820: 00000000bfef0000 - 00000000bfefc000 (ACPI data)
BIOS-e820: 00000000bfefc000 - 00000000bff00000 (ACPI NVS)
BIOS-e820: 00000000bff00000 - 00000000bff80000 (usable)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f66c0
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 786304
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 556928 pages, LIFO batch:16
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD ) @ 0x000f6720
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xbfef8195
ACPI: FADT (v001 INTEL K_CANYON 0x06040000 PTL 0x00000008) @ 0xbfefbe60
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xbfefbed4
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xbfefbf88
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xbfefbfb0
ACPI: DSDT (v001 INTEL PLUMAS 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x05] address[0xfec81000] gsi_base[72])
IOAPIC[3]: apic_id 5, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x08] address[0xfec81400] gsi_base[96])
IOAPIC[4]: apic_id 8, version 32, address 0xfec81400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2396.418 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3113488k/3145216k available (1876k kernel code, 30756k reserved, 759k data, 184k init, 2227648k highmem)
Calibrating delay using timer specific routine.. 4795.71 BogoMIPS (lpj=2397859)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
per-CPU timeslice cutoff: 1462.95 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4791.17 BogoMIPS (lpj=2395587)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c03f0000 soft=c03d0000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4791.17 BogoMIPS (lpj=2395586)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU2: Initial APIC ID: 6, Physical Processor ID: 3
CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c03f1000 soft=c03d1000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4791.22 BogoMIPS (lpj=2395611)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU3: Initial APIC ID: 7, Physical Processor ID: 3
CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping 04
Total of 4 processors activated (19169.28 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 544k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLC_.PH2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLC_.PH2B._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 96 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:07:02.0[A] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:07:03.0[A] -> GSI 18 (level, low) -> IRQ 185
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1175184314.730:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 10EA8AC2C8019830
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
i8042.c: Can't read CTR while initializing i8042.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: CREATIVE CD5233E-N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
KBC0 MSE0 ICH3 PH2A PH2B PH2A PH2B PH2A PH2B USB1 USB2 USB3
Freeing unused kernel memory: 184k freed
SCSI subsystem initialized
ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 96 (level, low) -> IRQ 209
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Vendor: EXABYTE Model: VXA-172 Rev: 310E
Type: Sequential-Access ANSI SCSI revision: 03
Adaptec aacraid driver (1.1-5[2412])
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
aacraid0: kernel 5.2-0[11564]
aacraid0: monitor 5.2-0[11564]
aacraid0: bios 5.2-0[11564]
aacraid0: serial 167eea
aacraid0: Non-DASD support enabled.
scsi1 : aacraid
Vendor: Adaptec Model: 2130S RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 286285824 512-byte hdwr sectors (146578 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 286285824 512-byte hdwr sectors (146578 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 134217727
st0: Block limits 4 - 245760 bytes.
inserting floppy driver for 2.6.9-42.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI interrupt 0000:07:02.0[A] -> GSI 17 (level, low) -> IRQ 193
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfc701000, irq 193, MAC addr 00:30:48:24:1E:AB
ACPI: PCI interrupt 0000:07:03.0[A] -> GSI 18 (level, low) -> IRQ 185
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfc702000, irq 185, MAC addr 00:30:48:24:1E:AC
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 00002000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 00002020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 00002040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-2: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:1d.0-2
input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:1d.0-2
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda5, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1
Adding 2096440k swap on /dev/sda7. Priority:-2 extents:1
Adding 2096440k swap on /dev/sda8. Priority:-3 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU1 updated from revision 0x0 to 0x1f, date = 06052003
microcode: CPU2 updated from revision 0x0 to 0x1f, date = 06052003
microcode: CPU3 updated from revision 0x0 to 0x1f, date = 06052003
microcode: CPU0 updated from revision 0x0 to 0x1f, date = 06052003
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0344160(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present