rendered paste body905717] eth0: Found BCM5201 PHY
[ 17.906574] PPP generic driver version 2.4.2
[ 17.906949] PPP Deflate Compression module registered
[ 17.907136] PPP BSD Compression module registered
[ 17.907479] MacIO PCI driver attached to Keylargo chipset
[ 17.912143] mediabay0: Registered KeyLargo media-bay
[ 17.918927] mediabay0: powering down
[ 18.160350] mediabay0: switching to 3
[ 18.167048] mediabay0: powering up
[ 18.396351] mediabay0: enabling (kind:3)
[ 18.464349] mediabay0: waiting reset (kind:3)
[ 18.573374] ohci1394: fw-host0: IntEvent: 00020010
[ 18.579768] ohci1394: fw-host0: irq_handler: Bus reset requested
[ 18.586083] ohci1394: fw-host0: Cancel request received
[ 18.592287] ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
[ 18.598464] ohci1394: fw-host0: IntEvent: 00010000
[ 18.604517] ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
[ 18.610602] ohci1394: fw-host0: SelfID packet 0x807f8c52 received
[ 18.616608] ieee1394: Including SelfID 0x807f8c52
[ 18.616620] ohci1394: fw-host0: SelfID for this node is 0x807f8c52
[ 18.622545] ohci1394: fw-host0: SelfID complete
[ 18.628348] ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
[ 18.634129] ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
[ 18.634294] ieee1394: NodeMgr: Processing reset for host 0
[ 18.634317] ohci1394: fw-host0: Single packet rcv'd
[ 18.640059] ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
[ 18.640096] mediabay0: waiting IDE reset (kind:3)
[ 18.908356] ieee1394: send packet at S100: 003c0000 ffc3ffff
[ 18.908387] ohci1394: fw-host0: Inserting packet for node 0-00:0000, tlabel=0, tcode=0x0, speed=0
[ 18.914466] ohci1394: fw-host0: Starting transmit DMA ctx=0
[ 18.920494] ohci1394: fw-host0: IntEvent: 00000001
[ 18.926423] ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008003
[ 18.932417] ohci1394: fw-host0: Packet sent to node 60 tcode=0xE tLabel=0 ack=0x3 spd=0 data=0x00000000 ctx=0
[ 18.938578] ieee1394: send packet local: ffc00140 ffc0ffff f0000400
[ 18.938602] ieee1394: received packet: ffc00140 ffc0ffff f0000400
[ 18.938636] ieee1394: send packet local: ffc00160 ffc00000 00000000 04045184
[ 18.938661] ieee1394: received packet: ffc00160 ffc00000 00000000 04045184
[ 18.938711] ieee1394: send packet local: ffc00540 ffc0ffff f0000404
[ 18.938732] ieee1394: received packet: ffc00540 ffc0ffff f0000404
[ 18.938754] ieee1394: send packet local: ffc00560 ffc00000 00000000 31333934
[ 18.938778] ieee1394: received packet: ffc00560 ffc00000 00000000 31333934
[ 18.938814] ieee1394: send packet local: ffc00940 ffc0ffff f0000408
[ 18.938835] ieee1394: received packet: ffc00940 ffc0ffff f0000408
[ 18.938856] ieee1394: send packet local: ffc00960 ffc00000 00000000 e064a232
[ 18.938880] ieee1394: received packet: ffc00960 ffc00000 00000000 e064a232
[ 18.938916] ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
[ 18.938936] ieee1394: received packet: ffc00d40 ffc0ffff f000040c
[ 18.938958] ieee1394: send packet local: ffc00d60 ffc00000 00000000 003065ff
[ 18.938982] ieee1394: received packet: ffc00d60 ffc00000 00000000 003065ff
[ 18.939017] ieee1394: send packet local: ffc01140 ffc0ffff f0000410
[ 18.939038] ieee1394: received packet: ffc01140 ffc0ffff f0000410
[ 18.939059] ieee1394: send packet local: ffc01160 ffc00000 00000000 fe74da10
[ 18.939083] ieee1394: received packet: ffc01160 ffc00000 00000000 fe74da10
[ 18.939136] ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
[ 18.939160] ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
[ 18.939204] ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
[ 18.939228] ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
[ 18.939915] ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
[ 18.939935] ieee1394: Host added: ID:BUS[0-00:1023] GUID[003065fffe74da10]
[ 19.804350] mediabay0: waiting IDE ready (kind:3)
[ 19.840349] mediabay0: up before IDE init
[ 19.846693] input: Macintosh mouse button emulation as /class/input/input0
[ 19.853254] apm_emu: APM Emulation 0.5 initialized.
[ 19.859517] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 19.865612] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 19.872167] adb: starting probe task...
[ 20.133183] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
[ 20.139884] ADB keyboard at 2, handler 1
[ 20.146025] Detected ADB keyboard, type ANSI.
[ 20.152437] input: ADB keyboard as /class/input/input1
[ 20.158961] input: ADB Powerbook buttons as /class/input/input2
[ 20.179716] ADB mouse at 3, handler set to 4 (trackpad)
[ 20.246234] input: ADB mouse as /class/input/input3
[ 20.252345] adb: finished probe task...
[ 20.304511] eth0: Link is up at 100 Mbps, full-duplex.
[ 20.900357] ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
[ 20.906491] Probing IDE interface ide0...
[ 21.192659] hda: HTS721010G9AT00, ATA DISK drive
[ 21.868366] hda: Enabling Ultra DMA 4
[ 21.875516] ide0 at 0xf1076000-0xf1076007,0xf1076160 on irq 19
[ 22.900353] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21
[ 22.906597] Probing IDE interface ide1...
[ 23.472395] Registered ide2 for media bay 0
[ 23.472414] ide2: Found Apple KeyLargo ATA-3 controller, bus ID 0 (mediabay), irq 23
[ 23.478670] Probing IDE interface ide2...
[ 23.876523] hde: MATSHITADVD-ROM SR-8174, ATAPI CD/DVD-ROM drive
[ 24.216358] hde: Enabling MultiWord DMA 2
[ 24.223741] ide2 at 0xf107e000-0xf107e007,0xf107e160 on irq 23
[ 24.230584] Probing IDE interface ide1...
[ 24.796564] hda: max request size: 512KiB
[ 25.122173] hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(66)
[ 25.129284] hda: cache flushes supported
[ 25.136111] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
[ 25.177176] hde: ATAPI 24X DVD-ROM drive, 512kB Cache, (U)DMA
[ 25.184156] Uniform CD-ROM driver Revision: 3.20
[ 29.200103] mesh: configured for synchronous 5 MB/s
[ 29.208036] video1394: Installed video1394 module
[ 29.215125] ieee1394: raw1394: /dev/raw1394 device initialized
[ 29.222433] WARNING: The dv1394 driver is unsupported and will be removed from Linux soon. Use raw1394 instead.
[ 29.230525] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
[ 29.238447] ohci1394: fw-host0: ohci_iso_recv_init: packet-per-buffer mode, DMA buffer is 16 pages (65536 bytes), using 16 blocks, buf_stride 4096, block_irq_interval 1
[ 29.254097] usbmon: debugfs is not available
[ 29.261933] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 29.262115] PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
[ 29.269800] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 29.277751] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 29.285560] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80082000
[ 29.368268] usb usb1: configuration #1 chosen from 1 choice
[ 29.375972] hub 1-0:1.0: USB hub found
[ 29.383493] hub 1-0:1.0: 2 ports detected
[ 29.492851] PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
[ 29.500260] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 29.507827] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 29.515213] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80081000
[ 29.596077] usb usb2: configuration #1 chosen from 1 choice
[ 29.603583] hub 2-0:1.0: USB hub found
[ 29.610858] hub 2-0:1.0: 2 ports detected
[ 29.720999] usbcore: registered new interface driver cdc_acm
[ 29.728248] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 29.735885] usbcore: registered new interface driver usblp
[ 29.743368] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 29.750962] Initializing USB Mass Storage driver...
[ 29.758673] usbcore: registered new interface driver usb-storage
[ 29.766274] USB Mass Storage support registered.
[ 29.773930] usbcore: registered new interface driver usbhid
[ 29.781528] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 29.789332] usbcore: registered new interface driver catc
[ 29.796927] drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
[ 29.804828] usbcore: registered new interface driver kaweth
[ 29.812538] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 29.820590] usbcore: registered new interface driver pegasus
[ 29.828390] drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
[ 29.836473] usbcore: registered new interface driver rtl8150
[ 29.844496] usbcore: registered new interface driver asix
[ 29.852333] usbcore: registered new interface driver cdc_ether
[ 29.860054] usbcore: registered new interface driver net1080
[ 29.867631] usbcore: registered new interface driver zaurus
[ 29.875109] usbcore: registered new interface driver usblcd
[ 29.882492] usbcore: registered new interface driver usbled
[ 29.890208] mice: PS/2 mouse device common for all mice
[ 29.898220] i2c /dev entries driver
[ 29.905957] PowerMac i2c bus pmu 2 registered
[ 29.913073] PowerMac i2c bus pmu 1 registered
[ 29.919964] PowerMac i2c bus mac-io 0 registered
[ 29.926554] PowerMac i2c bus uni-n 1 registered
[ 29.933106] PowerMac i2c bus uni-n 0 registered
[ 29.939177] Bluetooth: HCI UART driver ver 2.2
[ 29.945163] Bluetooth: HCI H4 protocol initialized
[ 29.951077] Bluetooth: HCI BCSP protocol initialized
[ 29.957236] TCP bic registered
[ 29.963060] NET: Registered protocol family 1
[ 29.968983] NET: Registered protocol family 10
[ 29.975153] lo: Disabled Privacy Extensions
[ 29.981222] IPv6 over IPv4 tunneling driver
[ 29.987231] NET: Registered protocol family 17
[ 29.992913] NET: Registered protocol family 5
[ 30.024400] Bluetooth: L2CAP ver 2.8
[ 30.029883] Bluetooth: L2CAP socket layer initialized
[ 30.035352] Bluetooth: SCO (Voice Link) ver 0.5
[ 30.040837] Bluetooth: SCO socket layer initialized
[ 30.046312] Bluetooth: RFCOMM socket layer initialized
[ 30.051629] Bluetooth: RFCOMM TTY layer initialized
[ 30.056709] Bluetooth: RFCOMM ver 1.8
[ 30.061622] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 30.066659] Bluetooth: BNEP filters: protocol multicast
[ 30.071622] Bluetooth: HIDP (Human Interface Emulation) ver 1.1
[ 30.077050] input: PMU as /class/input/input4
[ 30.425184] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 30.430058] EXT3-fs: write access will be enabled during recovery.
[ 30.449745] (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 41354 to 41366
[ 30.449766] (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 51 and revoked 0/2 blocks
[ 30.453730] kjournald starting. Commit interval 5 seconds
[ 30.458581] EXT3-fs: recovery complete.
[ 30.463732] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.468659] VFS: Mounted root (ext3 filesystem) readonly.
[ 30.473383] Freeing unused kernel memory: 216k init
[ 37.344073] Yenta: CardBus bridge found at 0001:10:1a.0 [0000:0000]
[ 37.344135] PCI: Bus 17, cardbus bridge: 0001:10:1a.0
[ 37.344145] IO window: 00001000-000011ff
[ 37.344157] IO window: 00001400-000015ff
[ 37.344170] PREFETCH window: f3000000-f33fffff
[ 37.344184] MEM window: f3400000-f37fffff
[ 37.344198] Yenta: Enabling burst memory read transactions
[ 37.344211] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 37.344221] Yenta: Routing CardBus interrupts to PCI
[ 37.344234] Yenta TI: socket 0001:10:1a.0, mfunc 0x00000002, devctl 0x60
[ 37.444479] Yenta: ISA IRQ mask 0x0000, PCI irq 58
[ 37.444496] Socket status: 30000006
[ 37.444514] pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
[ 37.444532] pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff
[ 37.444546] pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x9fffffff
[ 38.814957] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 38.815085] pmac_zilog: serial modem detected
[ 38.815202] ttyS0 at MMIO 0x80013020 (irq = 30) is a Z85c30 ESCC - Internal modem
[ 38.817635] ttyS1 at MMIO 0x80013000 (irq = 34) is a Z85c30 ESCC - Infrared port
[ 39.444075] EXT3 FS on hda4, internal journal
[ 40.092630] ieee80211_crypt: registered algorithm 'NULL'
[ 40.120116] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 40.120136] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 40.467652] bcm43xx driver
[ 40.583340] NET: Registered protocol family 23
[ 40.628881] IrCOMM protocol (Dag Brattli)
[ 41.005897] tun: Universal TUN/TAP device driver, 1.6
[ 41.005915] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 41.078788] IPv4 over IPv4 tunneling driver
[ 41.194666] airo(): Probing for PCI adapters
[ 41.198882] airo(): Finished probing for PCI adapters
[ 41.277386] Loaded prism54 driver, version 1.2
[ 41.322815] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 41.357405] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[ 41.396316] orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
[ 41.432961] orinoco_tmd 0.15 (Joerg Dorchain <joerg@dorchain.net>)
[ 41.534227] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)
[ 41.618887] ieee80211_crypt: registered algorithm 'WEP'
[ 41.693527] [drm] Initialized drm 1.1.0 20060810
[ 41.749085] [drm] Initialized r128 2.5.0 20030725 on minor 0
[ 41.820792] Linux video capture interface: v2.00
[ 43.129074] input: PowerMac Beep as /class/input/input5
[ 43.404684] usbcore: registered new interface driver usbserial
[ 43.404706] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 43.409147] drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 43.409237] usbcore: registered new interface driver belkin
[ 43.409248] drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2
[ 47.691544] kjournald starting. Commit interval 5 seconds
[ 47.691972] EXT3 FS on hda5, internal journal
[ 47.692001] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.727315] kjournald starting. Commit interval 5 seconds
[ 47.727663] EXT3 FS on hda6, internal journal
[ 47.727692] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.766393] kjournald starting. Commit interval 5 seconds
[ 47.766762] EXT3 FS on hda7, internal journal
[ 47.766791] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.794386] kjournald starting. Commit interval 5 seconds
[ 47.805720] EXT3 FS on hda8, internal journal
[ 47.805748] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.863453] kjournald starting. Commit interval 5 seconds
[ 47.876192] EXT3 FS on hda9, internal journal
[ 47.876220] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.883812] kjournald starting. Commit interval 5 seconds
[ 47.884136] EXT3 FS on hda10, internal journal
[ 47.884163] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.141484] Adding 5242872k swap on /dev/hda3. Priority:-1 extents:1 across:5242872k