rendered paste bodydmesg
Bootdata ok (command line is root=/dev/hdc1 ro )
Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 11:36:53 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 K8M890 ) @ 0x00000000000f7ca0
ACPI: RSDT (v001 K8M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef3040
ACPI: FADT (v001 K8M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef30c0
ACPI: MCFG (v001 K8M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef9940
ACPI: MADT (v001 K8M890 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef9880
ACPI: DSDT (v001 K8M890 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003fef0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003fef0000
On node 0 totalpages: 257294
DMA zone: 3042 pages, LIFO batch:0
DMA32 zone: 254252 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
Built 1 zonelists. Total pages: 257294
Kernel command line: root=/dev/hdc1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2000.055 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ d0000000 size 128 MB
Memory: 1022624k/1047488k available (1930k kernel code, 24476k reserved, 868k data, 176k init)
Calibrating delay using timer specific routine.. 4002.43 BogoMIPS (lpj=8004879)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500343
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4918k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x400-0x47f could not be reserved
pnp: 00:01: ioport range 0x500-0x50f has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:03' and the driver 'system'
pnp: match found with the PnP device '00:0e' and the driver 'system'
pnp: match found with the PnP device '00:0f' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: dfc00000-dfcfffff
PREFETCH window: dfb00000-dfbfffff
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: dc000000-deffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:03.0
IO window: c000-cfff
MEM window: dfe00000-dfefffff
PREFETCH window: dfd00000-dfdfffff
PCI: Bridge: 0000:00:13.0
IO window: b000-bfff
MEM window: dfa00000-dfafffff
PREFETCH window: df900000-df9fffff
PCI: Bridge: 0000:00:13.1
IO window: a000-afff
MEM window: df800000-df8fffff
PREFETCH window: df700000-df7fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1175287109.732:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
Allocate Port Service[0000:00:02.0:pcie02]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
Allocate Port Service[0000:00:03.0:pcie02]
Allocate Port Service[0000:00:03.0:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: match found with the PnP device '00:0a' and the driver 'serial'
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0d' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 176k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
SCSI subsystem initialized
libata version 2.00 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
USB Universal Host Controller Interface driver v3.0
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
hdb: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD200EB-00CPF0, ATA DISK drive
hdd: SAMSUNG SP2514N, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 209, io base 0x0000f900
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: max request size: 128KiB
hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33)
hdc: cache flushes not supported
hdc: hdc1 hdc2 < hdc5 >
hdd: max request size: 512KiB
hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
hdd: cache flushes supported
hdd: hdd1
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 217
PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 217, io base 0x0000f800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 20 sharing vector 0xE1 and IRQ 20
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 225
PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 225, io base 0x0000f700
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 21 sharing vector 0xE9 and IRQ 21
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233
PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 233, io base 0x0000f600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 225
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xFF00 ctl 0xFE02 bmdma 0xFB00 irq 225
ata2: SATA max UDMA/133 cmd 0xFD00 ctl 0xFC02 bmdma 0xFB08 irq 225
scsi0 : sata_via
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xFF07
scsi1 : sata_via
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xFD07
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 225
PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 1
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 225, io mem 0xdffff000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 233
eth0: VIA Rhine II at 0x1f200, 00:16:17:a6:ae:2d, IRQ 233.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
FDC 0 is a post-1991 82077
Linux video capture interface: v2.00
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
saa7130/34: v4l2 driver version 0.2.14 loaded
GSI 22 sharing vector 0x32 and IRQ 22
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 17 (level, low) -> IRQ 50
saa7130[0]: found at 0000:05:04.0, rev: 1, irq: 50, latency: 64, mmio: 0xdf8ff000
saa7134: <rant>
saa7134: Congratulations! Your TV card vendor saved a few
saa7134: cents for a eeprom, thus your pci board has no
saa7134: subsystem ID and I can't identify it automatically
saa7134: </rant>
saa7134: I feel better now. Ok, here are the good news:
saa7134: You can use the card=<nr> insmod option to specify
saa7134: which board do you have. The list:
saa7134: card=0 -> UNKNOWN/GENERIC
saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001
saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138
saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138
saa7134: card=4 -> EMPRESS 1131:6752
saa7134: card=5 -> SKNet Monster TV 1131:4e85
saa7134: card=6 -> Tevion MD 9717
saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01
saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142
saa7134: card=9 -> Medion 5044
saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI
saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143
saa7134: card=12 -> Medion 7134 16be:0003
saa7134: card=13 -> Typhoon TV+Radio 90031
saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b
saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a
saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840
saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133
saa7134: card=18 -> BMK MPEX No Tuner
saa7134: card=19 -> Compro VideoMate TV 185b:c100
saa7134: card=20 -> Matrox CronosPlus 102b:48d0
saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001
saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b
saa7134: card=23 -> BMK MPEX Tuner
saa7134: card=24 -> KNC One TV-Station DVR 1894:a006
saa7134: card=25 -> ASUS TV-FM 7133 1043:4843
saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b
saa7134: card=27 -> Manli MuchTV M-TV002/Behold TV 403 FM
saa7134: card=28 -> Manli MuchTV M-TV001/Behold TV 401
saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c
saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4
saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5
saa7134: card=32 -> AVACS SmartTV
saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff
saa7134: card=34 -> Noval Prime TV 7133
saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115
saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800
saa7134: card=37 -> Items MuchTV Plus / IT-005
saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152
saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212
saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100
saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100
saa7134: card=42 -> Sabrent SBT-TVFM (saa7130)
saa7134: card=43 -> :Zolid Xpert TV7134
saa7134: card=44 -> Empire PCI TV-Radio LE
saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715
saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee
saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162
saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158
saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200
saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d
saa7134: card=51 -> ProVideo PV952 1540:9524
saa7134: card=52 -> AverMedia AverTV/305 1461:2108
saa7134: card=53 -> ASUS TV-FM 7135 1043:4845
saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 1489:0214 5168:0304
saa7134: card=55 -> LifeView FlyDVB-T DUO 5168:0306
saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a
saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f
saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370
saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
saa7134: card=60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus 5168:0502 4e42:0502
saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004
saa7134: card=62 -> Compro VideoMate TV Gold+II
saa7134: card=63 -> Kworld Xpert TV PVR7134
saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210
saa7134: card=65 -> V-Stream Studio TV Terminator
saa7134: card=66 -> Yuan TUN-900 (saa7135)
saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091
saa7134: card=68 -> GoTView 7135 PCI 5456:7135
saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004
saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900
saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901
saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350
saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330
saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212
saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044
saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9
saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e
saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862
saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO
saa7134: card=80 -> ASUS Digimatrix TV 1043:0210
saa7134: card=81 -> Philips Tiger reference design 1131:2018
saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231
saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160
saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319
saa7134: card=85 -> AverTV DVB-T 777 1461:2c05
saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301
saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421
saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201
saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c
saa7134: card=90 -> Kworld ATSC110 17de:7350
saa7134: card=91 -> AVerMedia A169 B 1461:7360
saa7134: card=92 -> AVerMedia A169 B1 1461:6360
saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005
saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus 5168:3306 5168:3502
saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138
saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7130[0]: board init: gpio is 407f
saa7130[0]: Huh, no eeprom present (err=-5)?
saa7130[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:04:01.0 to 64
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Adding 1116476k swap on /dev/hdc5. Priority:-1 extents:1 across:1116476k
EXT3 FS on hdc1, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
GSI 23 sharing vector 0x3A and IRQ 23
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007
eth0: no IPv6 routers present