rendered paste body--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_wlan.h 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_wlan.h 2007-03-30 15:38:54.000000000 +0200
@@ -13,6 +13,7 @@
#define DEF_INTS -1, -1, -1, -1, -1, -1, -1
#define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx]
+#define IW_MODE_DSSSTEST 7
/* Specific skb->protocol value that indicates that the packet already contains
* txdesc header.
@@ -371,6 +372,7 @@
/* Test mode operations */
#define HFA384X_TEST_CHANGE_CHANNEL 0x08
#define HFA384X_TEST_MONITOR 0x0B
+#define HFA384X_TEST_TRANSMIT 0x0E
#define HFA384X_TEST_STOP 0x0F
#define HFA384X_TEST_CFG_BITS 0x15
#define HFA384X_TEST_CFG_BIT_ALC BIT(3)
@@ -575,6 +577,8 @@
int (*hw_config)(struct net_device *dev, int initial);
void (*hw_reset)(struct net_device *dev);
void (*hw_shutdown)(struct net_device *dev, int no_disable);
+ int (*monitor_enable)(struct net_device *dev);
+ int (*dssstest_enable)(struct net_device *dev);
int (*reset_port)(struct net_device *dev);
void (*schedule_reset)(local_info_t *local);
int (*download)(local_info_t *local,
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_common.h 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_common.h 2007-03-30 16:01:38.000000000 +0200
@@ -255,6 +255,7 @@
#define PRISM2_IOCTL_ADDMAC (SIOCIWFIRSTPRIV + 18)
#define PRISM2_IOCTL_DELMAC (SIOCIWFIRSTPRIV + 20)
#define PRISM2_IOCTL_KICKMAC (SIOCIWFIRSTPRIV + 22)
+#define PRISM2_IOCTL_DSSSTEST (SIOCIWFIRSTPRIV + 24)
/* following are not in SIOCGIWPRIV list; check permission in the driver code
*/
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_hw.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_hw.c 2007-03-30 15:26:54.000000000 +0200
@@ -1006,6 +1006,65 @@
return fid;
}
+static int prism2_monitor_enable(struct net_device *dev)
+{
+ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
+ printk(KERN_DEBUG "Port type setting for monitor mode "
+ "failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
+ 0, NULL, NULL)) {
+ printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
+ HFA384X_WEPFLAGS_PRIVACYINVOKED |
+ HFA384X_WEPFLAGS_HOSTENCRYPT |
+ HFA384X_WEPFLAGS_HOSTDECRYPT)) {
+ printk(KERN_DEBUG "WEP flags setting failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
+ printk(KERN_DEBUG "Could not set promiscuous mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int prism2_dssstest_enable(struct net_device *dev)
+{
+ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
+ printk(KERN_DEBUG "Port type setting for monitor mode "
+ "failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0e << 8),
+ 0xa010, NULL, NULL)) {
+ printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
+ HFA384X_WEPFLAGS_PRIVACYINVOKED |
+ HFA384X_WEPFLAGS_HOSTENCRYPT |
+ HFA384X_WEPFLAGS_HOSTDECRYPT)) {
+ printk(KERN_DEBUG "WEP flags setting failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
+ printk(KERN_DEBUG "Could not set promiscuous mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
static int prism2_reset_port(struct net_device *dev)
{
@@ -1032,6 +1091,14 @@
"port\n", dev->name);
}
+ if (local->iw_mode == IW_MODE_DSSSTEST)
+ /* force mode 0x0a after port 0 reset */
+ return prism2_dssstest_enable(dev);
+
+ if (local->iw_mode == IW_MODE_MONITOR)
+ /* force mode 0x0a after port 0 reset */
+ return prism2_monitor_enable(dev);
+
/* It looks like at least some STA firmware versions reset
* fragmentation threshold back to 2346 after enable command. Restore
* the configured value, if it differs from this default. */
@@ -1464,6 +1531,10 @@
return 1;
}
+ if (local->iw_mode == IW_MODE_MONITOR)
+ /* force mode 0x0a after port 0 reset */
+ prism2_monitor_enable(dev);
+
local->hw_ready = 1;
local->hw_reset_tries = 0;
local->hw_resetting = 0;
@@ -3146,6 +3217,8 @@
local->func->hw_config = prism2_hw_config;
local->func->hw_reset = prism2_hw_reset;
local->func->hw_shutdown = prism2_hw_shutdown;
+ local->func->monitor_enable = prism2_monitor_enable;
+ local->func->dssstest_enable = prism2_dssstest_enable;
local->func->reset_port = prism2_reset_port;
local->func->schedule_reset = prism2_schedule_reset;
#ifdef PRISM2_DOWNLOAD_SUPPORT
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_ioctl.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_ioctl.c 2007-03-30 15:59:55.000000000 +0200
@@ -1104,44 +1104,43 @@
printk(KERN_DEBUG "Enabling monitor mode\n");
hostap_monitor_set_type(local);
+ return local->func->reset_port(dev);
+}
- if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
- HFA384X_PORTTYPE_PSEUDO_IBSS)) {
- printk(KERN_DEBUG "Port type setting for monitor mode "
- "failed\n");
- return -EOPNOTSUPP;
- }
- /* Host decrypt is needed to get the IV and ICV fields;
- * however, monitor mode seems to remove WEP flag from frame
- * control field */
- if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
- HFA384X_WEPFLAGS_HOSTENCRYPT |
- HFA384X_WEPFLAGS_HOSTDECRYPT)) {
- printk(KERN_DEBUG "WEP flags setting failed\n");
- return -EOPNOTSUPP;
- }
+static int hostap_monitor_mode_disable(local_info_t *local)
+{
+ struct net_device *dev = local->ddev;
- if (local->func->reset_port(dev) ||
- local->func->cmd(dev, HFA384X_CMDCODE_TEST |
- (HFA384X_TEST_MONITOR << 8),
- 0, NULL, NULL)) {
- printk(KERN_DEBUG "Setting monitor mode failed\n");
- return -EOPNOTSUPP;
- }
+ if (dev == NULL)
+ return -1;
- return 0;
+ printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name);
+ dev->type = ARPHRD_ETHER;
+ dev->hard_header_parse = local->saved_eth_header_parse;
+ if (local->func->cmd(dev, HFA384X_CMDCODE_TEST |
+ (HFA384X_TEST_STOP << 8),
+ 0, NULL, NULL))
+ return -1;
+ return hostap_set_encryption(local);
}
+static int hostap_dssstest_mode_enable(local_info_t *local)
+{
+ struct net_device *dev = local->dev;
-static int hostap_monitor_mode_disable(local_info_t *local)
+ printk(KERN_DEBUG "Enabling dssstest mode\n");
+ return local->func->reset_port(dev);
+}
+
+static int hostap_dssstest_mode_disable(local_info_t *local)
{
struct net_device *dev = local->ddev;
if (dev == NULL)
return -1;
- printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name);
+ printk(KERN_DEBUG "%s: Disabling dssstest mode\n", dev->name);
dev->type = ARPHRD_ETHER;
dev->hard_header_parse = local->saved_eth_header_parse;
if (local->func->cmd(dev, HFA384X_CMDCODE_TEST |
@@ -1151,7 +1150,6 @@
return hostap_set_encryption(local);
}
-
static int prism2_ioctl_siwmode(struct net_device *dev,
struct iw_request_info *info,
__u32 *mode, char *extra)
@@ -1165,7 +1163,7 @@
if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA &&
*mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT &&
- *mode != IW_MODE_MONITOR)
+ *mode != IW_MODE_MONITOR && *mode != IW_MODE_DSSSTEST)
return -EOPNOTSUPP;
#ifdef PRISM2_NO_STATION_MODES
@@ -1182,11 +1180,15 @@
return -EINVAL;
}
+ if (local->iw_mode == IW_MODE_DSSSTEST)
+ hostap_dssstest_mode_disable(local);
+
if (local->iw_mode == IW_MODE_MONITOR)
hostap_monitor_mode_disable(local);
if ((local->iw_mode == IW_MODE_ADHOC ||
- local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) {
+ local->iw_mode == IW_MODE_MONITOR ||
+ local->iw_mode == IW_MODE_DSSSTEST) && *mode == IW_MODE_MASTER) {
/* There seems to be a firmware bug in at least STA f/w v1.5.6
* that leaves beacon frames to use IBSS type when moving from
* IBSS to Host AP mode. Doing double Port0 reset seems to be
@@ -1198,8 +1200,11 @@
"%d -> %d\n", dev->name, local->iw_mode, *mode);
local->iw_mode = *mode;
+ if (local->iw_mode == IW_MODE_DSSSTEST)
+ return hostap_dssstest_mode_enable(local);
+
if (local->iw_mode == IW_MODE_MONITOR)
- hostap_monitor_mode_enable(local);
+ return hostap_monitor_mode_enable(local);
else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
!local->fw_encrypt_ok) {
printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
@@ -2132,6 +2137,8 @@
static const struct iw_priv_args prism2_priv[] = {
{ PRISM2_IOCTL_MONITOR,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" },
+ { PRISM2_IOCTL_DSSSTEST,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dssstest" },
{ PRISM2_IOCTL_READMIF,
IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" },
@@ -2959,6 +2966,32 @@
}
+static int prism2_ioctl_priv_dssstest(struct net_device *dev, int *i)
+{
+ struct hostap_interface *iface;
+ local_info_t *local;
+ int ret = 0;
+ u32 mode;
+
+ iface = netdev_priv(dev);
+ local = iface->local;
+
+ if (*i == 0) {
+ /* Disable dssstest mode - old mode was not saved, so go to
+ * Master mode */
+ mode = IW_MODE_MASTER;
+ ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL);
+ } else if (*i == 1) {
+ mode = IW_MODE_DSSSTEST;
+ ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL);
+ hostap_dssstest_mode_enable(local);
+ } else
+ ret = -EINVAL;
+
+ return ret;
+}
+
+
static int prism2_ioctl_priv_reset(struct net_device *dev, int *i)
{
struct hostap_interface *iface;
@@ -4019,6 +4052,11 @@
else ret = prism2_ioctl_priv_monitor(dev, (int *) wrq->u.name);
break;
+ case PRISM2_IOCTL_DSSSTEST:
+ if (!capable(CAP_NET_ADMIN)) ret = -EPERM;
+ else ret = prism2_ioctl_priv_dssstest(dev, (int *) wrq->u.name);
+ break;
+
case PRISM2_IOCTL_RESET:
if (!capable(CAP_NET_ADMIN)) ret = -EPERM;
else ret = prism2_ioctl_priv_reset(dev, (int *) wrq->u.name);
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_80211_tx.c 2007-03-13 20:15:44.000000000 +0100
@@ -69,6 +69,9 @@
iface = netdev_priv(dev);
local = iface->local;
+ if (local->iw_mode == IW_MODE_MONITOR)
+ goto xmit;
+
if (skb->len < ETH_HLEN) {
printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
@@ -234,6 +237,7 @@
memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
}
+xmit:
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
@@ -404,8 +408,6 @@
}
if (skb->len < 24) {
- printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
- "(len=%d)\n", dev->name, skb->len);
ret = 0;
iface->stats.tx_dropped++;
goto fail;
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_cs.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_cs.c 2007-03-13 20:15:44.000000000 +0100
@@ -830,58 +830,105 @@
}
static struct pcmcia_device_id hostap_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
- PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
- PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), // SonicWALL Long Range Wireless Card
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7110), // D-Link DWL-650 rev P 802.11b WLAN card
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), // Sohoware NCP110, Philips 802.11b
+// PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), // Intel PRO/Wireless 2011 (Symbol24)
+ PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), // AnyPoint(TM) Wireless II PC Card
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), // 3Com AirConnect PCI 777A
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), // PROXIM RangeLAN-DS/LAN PC CARD
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), // Compaq WL100 11 Mbps Wireless Adapter
+// PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), // Mostly Lucent Orinoco (HermesI), but also some Prism2 :(
+// PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), // Ericsson WLAN Card C11 (Symbol24)
+// PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), // Nortel eMobility 802.11 Wireless Adapter (Symbol24)
+ PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), // Intermec MobileLAN 11Mbps 802.11b WLAN Card
+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), // Samsung SWL2000-N 11Mb/s WLAN Card
+// PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), // AirWay 802.11 Adapter (HermesI)
+// PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), // ARtem Onair (HermesI)
+// PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), // Symbol Technologies LA4111 (Symbol24)
+ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), // Buffalo WLI-PCM-S11
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), // Linksys WPC11 Version 2.5
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), // Linksys WPC11 Version 3
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), // Compaq HNW-100 11 Mbps Wireless Adapter
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), // Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)
+ PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), // ASUS SpaceLink WL-100
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), // SpeedStream SS1021 Wireless Adapter
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), // SpeedStream SS1021 Wireless Adapter (newer)
+ PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), // Microsoft Wireless Notebook Adapter MN-520
+ PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), // PLANEX RoadLannerWave GW-NS11H
+ PCMCIA_DEVICE_MANF_CARD(0x1668, 0x0101), // ActionTec 802CI2/HCW01170-01
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001), // Airvast ?
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), // Airvast WN-100
+ PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), // Adaptec Ultra Wireless ANW-8030
+ PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), // CONTEC FLEXSCAN/FX-DDS110-PCC
+ PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), // Corega KK Wireless LAN PCC-11
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), // Conceptronic CON11Cpro, EMTAC A2424i
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), // Safeway 802.11b, ZCOMAX AirRunner/XI-300
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), // D-Link DCF660, ZCOMAX XI-325HP 200mw
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), // SMC2532W-B V2
+
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
0x74c5e40d),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
0x4b801a17),
- PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
- 0x7a954bd9, 0x74be00c6),
- PCMCIA_DEVICE_PROD_ID1234(
- "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
- "Eval-RevA",
- 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e),
- PCMCIA_DEVICE_PROD_ID123(
- "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
- 0xe6ec52ce, 0x08649af2, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID123(
- "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
- 0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID123(
- "Instant Wireless ", " Network PC CARD", "Version 01.02",
- 0x11d901af, 0x6e9bd926, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID123(
- "SMC", "SMC2632W", "Version 01.02",
- 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G",
- 0x2decece3, 0x82067c18),
- PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
- 0x54f7c49c, 0x15a75e5b),
- PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
- 0x74c5e40d, 0xdb472a18),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
- 0x0733cc81, 0x0c52f395),
- PCMCIA_DEVICE_PROD_ID12(
- "ZoomAir 11Mbps High", "Rate wireless Networking",
- 0x273fe3db, 0x32a1eaee),
- PCMCIA_DEVICE_NULL
+
+ PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
+// PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), // Symbol24
+ PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+ PCMCIA_DEVICE_PROD_ID123("Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02", 0xe6ec52ce, 0x08649af2, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+ PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+// PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+// PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
+// PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+ PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
+ PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
+ PCMCIA_DEVICE_PROD_ID123("D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", 0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
+// PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), // Symbol24
+ PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
+// PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+ PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+// PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+ PCMCIA_DEVICE_PROD_ID1234("Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P", "Eval-RevA", 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e),
+ PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+ PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+ PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
+// PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), // HermesI
+// PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), // HermesI
+// PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
+// PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), // HermesI
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
+// PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), // Symbol24
+ PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
+ PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+ PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
+ PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+ PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+// PCMCIA_DEVICE_PROD_ID1("Symbol Technologies", 0x3f02b4d6), // Symbol24
+// PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), // Symbol24
+ PCMCIA_DEVICE_PROD_ID123("SMC", "SMC2632W", "Version 01.02", 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+ PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+ PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_main.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_main.c 2007-03-13 20:15:44.000000000 +0100
@@ -332,7 +332,7 @@
if (local->iw_mode == IW_MODE_REPEAT)
return HFA384X_PORTTYPE_WDS;
if (local->iw_mode == IW_MODE_MONITOR)
- return HFA384X_PORTTYPE_PSEUDO_IBSS;
+ return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
return HFA384X_PORTTYPE_HOSTAP;
}
--- linux-source-2.6.17/drivers/net/wireless/hostap/hostap_plx.c 2006-10-01 18:42:46.000000000 +0200
+++ linux-source-2.6.17/drivers/net/wireless/hostap/hostap_plx.c 2007-03-13 20:15:44.000000000 +0100
@@ -100,6 +100,7 @@
{ 0xc250, 0x0002 } /* EMTAC A2424i */,
{ 0xd601, 0x0002 } /* Z-Com XI300 */,
{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
+ { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
{ 0, 0}
};