rendered paste bodyBootdata ok (command line is root=/dev/ram0 ro dolvm2 domdraid real_root=/dev/gentest/root)
Linux version 2.6.16.42-xen (root@horse) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #3 SMP Sun Mar 25 14:05:52 CDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008800000 (usable)
No mptable found.
Built 1 zonelists
Kernel command line: root=/dev/ram0 ro dolvm2 domdraid real_root=/dev/gentest/root
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 32768 bytes)
Xen reported: 1603.635 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Software IO TLB disabled
Memory: 117552k/139264k available (2285k kernel code, 13356k reserved, 849k data, 164k init)
Calibrating delay using timer specific routine.. 4010.78 BogoMIPS (lpj=8021568)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 6530k freed
DMI not present or invalid.
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: System does not support PCI
PCI: System does not support PCI
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Registering block device major 3
blkfront: hdb1: barriers enabled
blkfront: hda1: barriers enabled
netfront: device eth0 has copying receive path.
3ware Storage Controller device driver for Linux v1.26.02.001.
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
[32;1m>>[0;39m[1m Loading modules [0;39m
[1m ::[0;39m Scanning for ehci-hcd...usbcore, ehci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for usb-storage...usb-storage loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for uhci-hcd...uhci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for ohci-hcd...ohci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for usbhid...usbhid loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sl811-hcd...sl811-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sata_nv...sata_nv loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for ahci...ahci loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mod...dm-mod loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mirror...dm-mirror loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid0...raid0 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid10...raid10 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for nfs...sunrpc, lockd, nfs loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for xfs...exportfs, xfs loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for e1000...e1000 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for tg3...tg3 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mod...[0G[0K[0;39m[1m ::[0;39m Scanning for dm-snapshot...dm-snapshot loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mirror...[0G[0K[0;39m[32;1m>>[0;39m[1m Activating mdev [0;39m
mdadm: /dev/md/2 has been started with 2 drives.
[32;1m>>[0;39m[1m Scanning for Volume Groups [0;39m
Reading all physical volumes. This may take a while...
Found volume group "gentest" using metadata type lvm2
[32;1m>>[0;39m[1m Activating Volume Groups [0;39m
1 logical volume(s) in volume group "gentest" now active
[32;1m>>[0;39m[1m Determining root device... [0;39m
[32;1m>>[0;39m[1m Mounting root... [0;39m
[32;1m>>[0;39m[1m Booting (initramfs)..
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2
Press I to enter interactive boot mode
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev for udev ... [ ok ]
* Seeding /dev with needed nodes ... [ ok ]
* Setting up proper hotplug agent ...
* Using netlink for hotplug events...
[ ok ]
* Starting udevd ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Letting udev process events ... [ ok ]
* Finalizing udev configuration ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Skipping root filesystem check (fstab's passno == 0) ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Starting up RAID devices (mdadm) ... [ ok ]
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possible) swap ... [ ok ]
* Setting system clock using the hardware clock [xen] ... [ ok ]
* Configuring kernel parameters ...error: "kernel.sysrq" is an unknown key
[ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* Setting hostname to gentest ... [ ok ]
* Starting lo
* Running preup function
[ ok ]
* Bringing up lo
* 127.0.0.1/8
[ ok ]
* Adding routes
* 127.0.0.0/8 ... [ ok ]
* Initializing random number generator ... [ ok ]
INIT: Entering runlevel: 3
* Starting syslog-ng ... [ ok ]
* Starting eth0
* Running preup function
[ ok ]
* Bringing up eth0
* 192.168.1.150/24
[ ok ]
* Adding routes
* default via 192.168.1.254 ... [ ok ]
* Mounting network filesystems ... [ ok ]
* Starting rsync-modules ... [ ok ]
* Starting sshd ... [ ok ]
* Starting vixie-cron ... [ ok ]
* Starting local ... [ ok ]
This is gentest.unknown_domain (Linux x86_64 2.6.16.42-xen) 15:23:25
gentest login: root
Password:
[01;31mgentest[01;34m ~ #[00m halt
Broadcast message from root (tty1) (Wed Mar 28 15:23:33 2007):
The system is going down for system halt NOW!
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
* Stopping local ... [ ok ]
* Stopping vixie-cron ... [ ok ]
* Saving random seed ... [ ok ]
* Stopping sshd ... [ ok ]
* Unmounting network filesystems ... [ ok ]
* Stopping eth0
* Bringing down eth0
* Shutting down eth0 ... [ ok ]
* Stopping lo
* Bringing down lo
* Shutting down lo ... [ ok ]
* Stopping syslog-ng ... [ ok ]
* Unmounting filesystems ... [ ok ]
* Shutting down RAID devices (mdadm) ...mdadm: fail to stop array /dev/md2: Device or resource busy
[ !! ]
* Remounting remaining filesystems readonly ... [ ok ]
System halted.