OpenBSD 4.1-current (GENERIC.MP) #1246: Mon Mar 26 16:55:12 MDT 2007
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
real mem = 1038036992 (1013708K)
avail mem = 939630592 (917608K)
using 4278 buffers containing 52027392 bytes (50808K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/01/07, BIOS32 rev. 0 @ 0xffea0, SMBIOS rev. 2.3 @ 0xf0450 (68 entries)
bios0: Dell Inc. OptiPlex 320
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/160 (8 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x4385
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x2000!
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a33 rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 18 function 0 "ATI IXP600 SATA" rev 0x00: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD080HJ/P>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 19 function 0 "ATI IXP600 USB" rev 0x00: irq 10, version 1.0, legacy support
ohci0: SMM does not respond, will reset
ohci1 at pci0 dev 19 function 1 "ATI IXP600 USB" rev 0x00: irq 5, version 1.0, legacy support
ohci1: SMM does not respond, will reset
ohci2 at pci0 dev 19 function 2 "ATI IXP600 USB" rev 0x00: irq 4, version 1.0, legacy support
ohci2: SMM does not respond, will reset
ohci3 at pci0 dev 19 function 3 "ATI IXP600 USB" rev 0x00: irq 5, version 1.0, legacy support
ohci3: SMM does not respond, will reset
ohci4 at pci0 dev 19 function 4 "ATI IXP600 USB" rev 0x00: irq 4, version 1.0, legacy support
ohci4: SMM does not respond, will reset
ehci0 at pci0 dev 19 function 5 "ATI IXP600 USB2" rev 0x00: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
"ATI IXP600 SMBus" rev 0x13 at pci0 dev 20 function 0 not configured
pciide1 at pci0 dev 20 function 1 "ATI IXP600 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-H492C, DE02> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI IXP600 HD Audio" rev 0x00: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1983 (rev. 4.0), HDA version 1.0
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP600 LPC" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI IXP600 PCI" rev 0x00
pci2 at ppb1 bus 2
bce0 at pci2 dev 9 function 0 "Broadcom BCM4401B0" rev 0x02: irq 11, address 00:15:c5:35:eb:78
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at ohci1: USB revision 1.0
uhub2 at usb2
uhub2: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at ohci2: USB revision 1.0
uhub3 at usb3
uhub3: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at ohci3: USB revision 1.0
uhub4 at usb4
uhub4: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
usb5 at ohci4: USB revision 1.0
uhub5 at usb5
uhub5: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 0
uhidev1: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302