rendered paste bodyserge@serge-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.20-13-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu 2.6.20-13.21-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fec0000 end: 000000000ffc0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000ffc0000 size: 0000000000038000 end: 000000000fff8000 type: 3
[ 0.000000] copy_e820_map() start: 000000000fff8000 size: 0000000000008000 end: 0000000010000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65472) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65472
[ 0.000000] HighMem 65472 -> 65472
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65472
[ 0.000000] On node 0 totalpages: 65472
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60897 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000ff980
[ 0.000000] ACPI: RSDT (v001 D850GB G285010A 0x20010718 MSFT 0x00001011) @ 0x0fff0000
[ 0.000000] ACPI: FADT (v001 D850GB GB85010A 0x20010718 MSFT 0x00001011) @ 0x0fff1000
[ 0.000000] ACPI: DSDT (v001 D850GB GB85010A 0x00000002 MSFT 0x0100000b) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[ 0.000000] Detected 1495.552 MHz processor.
[ 17.875028] Built 1 zonelists. Total pages: 64961
[ 17.875035] Kernel command line: root=UUID=952d93c7-5dae-4930-9454-a677abc3ef00 ro quiet splash
[ 17.875321] Found and enabled local APIC!
[ 17.875326] mapped APIC to ffffd000 (fee00000)
[ 17.875331] Enabling fast FPU save and restore... done.
[ 17.875336] Enabling unmasked SIMD FPU exception support... done.
[ 17.875352] Initializing CPU#0
[ 17.875441] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 17.877272] Console: colour VGA+ 80x25
[ 17.877457] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.877643] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 17.887201] Memory: 248640k/261888k available (1992k kernel code, 12688k reserved, 889k data, 328k init, 0k highmem)
[ 17.887219] virtual kernel memory layout:
[ 17.887221] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 17.887223] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.887225] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 17.887227] lowmem : 0xc0000000 - 0xcffc0000 ( 255 MB)
[ 17.887229] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 17.887231] .data : 0xc02f2184 - 0xc03d06d4 ( 889 kB)
[ 17.887233] .text : 0xc0100000 - 0xc02f2184 (1992 kB)
[ 17.887238] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.963358] Calibrating delay using timer specific routine.. 2994.36 BogoMIPS (lpj=5988736)
[ 17.963432] Security Framework v1.0.0 initialized
[ 17.963443] SELinux: Disabled at boot.
[ 17.963472] Mount-cache hash table entries: 512
[ 17.963727] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 17.963748] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 17.963753] CPU: L2 cache: 256K
[ 17.963757] CPU: Hyper-Threading is disabled
[ 17.963762] CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
[ 17.963782] Compat vDSO mapped to ffffe000.
[ 17.963788] Remapping vsyscall page to ffffe000
[ 17.963810] Checking 'hlt' instruction... OK.
[ 17.979572] SMP alternatives: switching to UP code
[ 17.979962] Freeing SMP alternatives: 11k freed
[ 17.980365] Early unpacking initramfs... done
[ 18.522763] ACPI: Core revision 20060707
[ 18.523120] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.525644] ACPI: setting ELCR to 0200 (from 0e28)
[ 18.526420] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
[ 18.526430] SMP motherboard not detected.
[ 18.530452] Uhhuh. NMI received for unknown reason 2d on CPU 0.
[ 18.530508] Do you have a strange power saving mode enabled?
[ 18.530561] Dazed and confused, but trying to continue
[ 18.630748] Brought up 1 CPUs
[ 18.631180] Booting paravirtualized kernel on bare hardware
[ 18.631311] Time: 15:56:00 Date: 02/27/107
[ 18.631360] NET: Registered protocol family 16
[ 18.631526] EISA bus registered
[ 18.631535] ACPI: bus type pci registered
[ 18.631697] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
[ 18.631701] PCI: Using configuration type 1
[ 18.631704] Setting up standard PCI resources
[ 18.640430] ACPI: Interpreter enabled
[ 18.640438] ACPI: Using PIC for interrupt routing
[ 18.641262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.641277] PCI: Probing PCI hardware (bus 00)
[ 18.641881] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 18.641889] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[ 18.642286] Boot video device is 0000:01:00.0
[ 18.642675] PCI: Transparent bridge - 0000:00:1e.0
[ 18.642721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.644688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 18.646822] ACPI: Power Resource [FDDP] (off)
[ 18.647565] ACPI: Power Resource [URP1] (off)
[ 18.647747] ACPI: Power Resource [URP2] (off)
[ 18.648718] ACPI: Power Resource [LPTP] (off)
[ 18.650435] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 18.650919] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 18.651322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 18.651718] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 18.652131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 18.652522] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 18.652914] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 18.653304] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 18.653534] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.653556] pnp: PnP ACPI init
[ 18.658459] pnp: PnP ACPI: found 12 devices
[ 18.658469] PnPBIOS: Disabled by ACPI PNP
[ 18.658555] PCI: Using ACPI for IRQ routing
[ 18.658561] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.662811] NET: Registered protocol family 8
[ 18.662816] NET: Registered protocol family 20
[ 18.663838] PCI: Bridge: 0000:00:01.0
[ 18.663843] IO window: disabled.
[ 18.663850] MEM window: fc900000-fe9fffff
[ 18.663856] PREFETCH window: e4600000-f46fffff
[ 18.663864] PCI: Bridge: 0000:00:1e.0
[ 18.663869] IO window: d000-dfff
[ 18.663877] MEM window: fea00000-feafffff
[ 18.663884] PREFETCH window: f4700000-f47fffff
[ 18.663909] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.663954] NET: Registered protocol family 2
[ 18.702727] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 18.702862] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 18.702924] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 18.702956] TCP: Hash tables configured (established 8192 bind 4096)
[ 18.702961] TCP reno registered
[ 18.714810] checking if image is initramfs... it is
[ 19.777551] Freeing initrd memory: 6746k freed
[ 19.778160] audit: initializing netlink socket (disabled)
[ 19.778179] audit(1175010960.984:1): initialized
[ 19.778423] VFS: Disk quotas dquot_6.5.1
[ 19.778456] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.778535] io scheduler noop registered
[ 19.778541] io scheduler anticipatory registered
[ 19.778545] io scheduler deadline registered
[ 19.778562] io scheduler cfq registered (default)
[ 19.778984] isapnp: Scanning for PnP cards...
[ 20.135544] isapnp: No Plug & Play device found
[ 20.225997] Real Time Clock Driver v1.12ac
[ 20.226093] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.226257] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.228285] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.228911] mice: PS/2 mouse device common for all mice
[ 20.230044] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.230498] input: Macintosh mouse button emulation as /class/input/input0
[ 20.230569] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.230577] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.230932] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 20.234392] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.234404] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.234680] EISA: Probing bus 0 at eisa.0
[ 20.234727] EISA: Detected 0 cards.
[ 20.264856] TCP cubic registered
[ 20.264867] NET: Registered protocol family 1
[ 20.265008] Testing NMI watchdog ... CPU#0: NMI appears to be stuck (2->2)!
[ 20.304714] Using IPI No-Shortcut mode
[ 20.304821] ACPI: (supports S0 S1 S4 S5)
[ 20.304900] Magic number: 15:491:943
[ 20.304952] Time: tsc clocksource has been installed.
[ 20.305078] hash matches device ptyye
[ 20.305173] hash matches device tty0
[ 20.305176] hash matches device console
[ 20.305620] Freeing unused kernel memory: 328k freed
[ 20.316996] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.843575] Capability LSM initialized
[ 22.929768] SCSI subsystem initialized
[ 22.939669] libata version 2.20 loaded.
[ 22.947109] ata_piix 0000:00:1f.1: version 2.10ac1
[ 22.947153] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 22.947241] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 22.947292] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 22.947323] scsi0 : ata_piix
[ 22.980857] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 23.043740] usbcore: registered new interface driver usbfs
[ 23.043780] usbcore: registered new interface driver hub
[ 23.043826] usbcore: registered new device driver usb
[ 23.118269] ata1.00: ATA-5: IC35L040AVER07-0, ER4OA44A, max UDMA/100
[ 23.118277] ata1.00: 80418240 sectors, multi 16: LBA
[ 23.118827] USB Universal Host Controller Interface driver v3.0
[ 23.130208] ata1.00: configured for UDMA/100
[ 23.130229] scsi1 : ata_piix
[ 23.280482] Floppy drive(s): fd0 is 1.44M
[ 23.304166] FDC 0 is a post-1991 82077
[ 23.461833] ata2.00: ATAPI, max UDMA/33
[ 23.633764] ata2.01: ATAPI, max UDMA/33
[ 23.805475] ata2.00: configured for UDMA/33
[ 23.977403] ata2.01: configured for UDMA/33
[ 23.977613] scsi 0:0:0:0: Direct-Access ATA IC35L040AVER07-0 ER4O PQ: 0 ANSI: 5
[ 23.981950] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 23.984057] scsi 1:0:1:0: CD-ROM TOSHIBA CD-ROM XM-6602B 1017 PQ: 0 ANSI: 5
[ 23.984760] 8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 23.984766] 8139cp 0000:02:0a.0: Try the "8139too" driver instead.
[ 23.988957] 8139too Fast Ethernet driver 0.9.28
[ 23.989905] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
[ 23.989912] PCI: setting IRQ 3 as level-triggered
[ 23.989918] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
[ 23.990655] eth0: RealTek RTL8139 at 0xd0856c00, 00:a0:d2:1c:52:94, IRQ 3
[ 23.990662] eth0: Identified 8139 chip type 'RTL-8139 rev K'
[ 23.991108] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 23.991116] PCI: setting IRQ 5 as level-triggered
[ 23.991121] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 23.991139] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.991145] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 23.991629] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 23.991669] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ef40
[ 23.992697] usb usb1: configuration #1 chosen from 1 choice
[ 23.993096] hub 1-0:1.0: USB hub found
[ 23.993118] hub 1-0:1.0: 2 ports detected
[ 24.031826] SCSI device sda: 80418240 512-byte hdwr sectors (41174 MB)
[ 24.031880] sda: Write Protect is off
[ 24.031885] sda: Mode Sense: 00 3a 00 00
[ 24.031953] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.032051] SCSI device sda: 80418240 512-byte hdwr sectors (41174 MB)
[ 24.032070] sda: Write Protect is off
[ 24.032074] sda: Mode Sense: 00 3a 00 00
[ 24.032104] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.032110] sda: sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 24.044195] Uniform CD-ROM driver Revision: 3.20
[ 24.044589] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 24.054942] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 24.055279] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 24.064562] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.064830] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 24.065129] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 24.066699] sda5 sda6 >
[ 24.086627] sd 0:0:0:0: Attached scsi disk sda
[ 24.097652] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 24.097661] PCI: setting IRQ 9 as level-triggered
[ 24.097666] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[ 24.097686] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 24.097692] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 24.097766] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 24.097800] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80
[ 24.097967] usb usb2: configuration #1 chosen from 1 choice
[ 24.098016] hub 2-0:1.0: USB hub found
[ 24.098029] hub 2-0:1.0: 2 ports detected
[ 24.340682] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 24.415785] Attempting manual resume
[ 24.415792] swsusp: Resume From Partition 8:6
[ 24.415795] PM: Checking swsusp image.
[ 24.416034] PM: Resume from disk failed.
[ 24.445701] kjournald starting. Commit interval 5 seconds
[ 24.445724] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.531178] usb 1-2: configuration #1 chosen from 1 choice
[ 35.870542] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 36.779595] NET: Registered protocol family 10
[ 36.779745] lo: Disabled Privacy Extensions
[ 38.414546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.417591] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.190574] Linux agpgart interface v0.102 (c) Dave Jones
[ 39.193795] agpgart: Detected an Intel i850 Chipset.
[ 39.198004] agpgart: AGP aperture is 64M @ 0xf8000000
[ 39.528703] iTCO_vendor_support: vendor-support=0
[ 39.551680] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 39.551839] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
[ 39.551909] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.581713] input: PC Speaker as /class/input/input2
[ 39.657062] gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xdff0, speed 864kHz
[ 39.734019] intel_rng: Firmware space is locked read-only. If you can't or
[ 39.734024] intel_rng: don't want to disable this in firmware setup, and if
[ 39.734027] intel_rng: you are certain that your system has a functional
[ 39.734029] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 39.751734] parport: PnPBIOS parport detected.
[ 39.751766] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 40.317100] nvidia: module license 'NVIDIA' taints kernel.
[ 40.700074] usbcore: registered new interface driver hiddev
[ 40.775523] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 40.775531] PCI: setting IRQ 11 as level-triggered
[ 40.775537] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 40.775896] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 40.912094] input: Microsoft Microsoft IntelliMouse Explorer as /class/input/input3
[ 40.912271] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse Explorer] on usb-0000:00:1f.2-2
[ 40.912296] usbcore: registered new interface driver usbhid
[ 40.912302] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 41.386741] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[ 41.812860] lp0: using parport0 (interrupt-driven).
[ 41.870470] Adding 787144k swap on /dev/disk/by-uuid/2c390300-8570-444c-b956-ab5804a7e176. Priority:-1 extents:1 across:787144k
[ 41.961375] EXT3 FS on sda1, internal journal
[ 47.272497] eth0: no IPv6 routers present
[ 50.572333] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[ 50.572353] ReiserFS: sda5: using ordered data mode
[ 50.579506] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 50.580838] ReiserFS: sda5: checking transaction log (sda5)
[ 50.646849] ReiserFS: sda5: Using r5 hash to sort names
[ 52.273602] NET: Registered protocol family 17
[ 57.242243] input: Power Button (FF) as /class/input/input4
[ 57.286300] ACPI: Power Button (FF) [PWRF]
[ 57.365929] input: Sleep Button (CM) as /class/input/input5
[ 57.366293] ACPI: Sleep Button (CM) [SBTN]
[ 57.421015] Using specific hotkey driver
[ 57.503050] No dock devices found.
[ 57.577237] ibm_acpi: ec object not found
[ 57.784924] pcc_acpi: loading...
[ 64.768168] ppdev: user-space parallel port driver
[ 66.684674] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 66.684705] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 66.684731] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 69.568078] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 69.568086] apm: overridden by ACPI.
[ 73.944474] Bluetooth: Core ver 2.11
[ 73.944573] NET: Registered protocol family 31
[ 73.944577] Bluetooth: HCI device and connection manager initialized
[ 73.944583] Bluetooth: HCI socket layer initialized
[ 74.019978] Bluetooth: L2CAP ver 2.8
[ 74.019986] Bluetooth: L2CAP socket layer initialized
[ 74.025467] Bluetooth: RFCOMM socket layer initialized
[ 74.025487] Bluetooth: RFCOMM TTY layer initialized
[ 74.025491] Bluetooth: RFCOMM ver 1.8
[ 74.979299] eth0: no IPv6 routers present