rendered paste bodyUncompressing Linux............................................................................................. done, bootin.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #2 PREEMPT Sun Feb 12 03:30:25 CET 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Synology DiskStation DS101
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init rtc-rs5c372.probe=0,0x32 root=/dev/sda2 ro noinitrd noirq0PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61836KB available (2413K code, 472K data, 84K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:02.1 on pci bus
dmabounce: registered device 0000:00:02.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28
ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1066 bmdma 0x1048 irq 28
ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x105F
ata2: disabling port
scsi1 : pata_artop
Vendor: ATA Model: Maxtor 6L160P0 Rev: BAH4
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
IXP4XXFlash: map_probe failed
Using configured DiskOnChip probe address 0x50000000
Whatever!<3>Last whatever<3>ReadDOC #1
WriteDOC #1
WriteDOC #2
WriteDOC #3
WriteDOC #4
ReadDOC #2
PCI: enabling device 0000:00:02.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:02.2, from 26 to 10
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 26, io mem 0x48010000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
PCI: enabling device 0000:00:02.0 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.0, from 27 to 11
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:02.0: irq 27, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: enabling device 0000:00:02.1 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.1, from 27 to 11
uhci_hcd 0000:00:02.1: UHCI Host Controller
uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:02.1: irq 27, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver catc
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 3-1:1.0: pl2303 converter detected
usb 3-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
input: ixp4xx beeper as /class/input/input0
i2c /dev entries driver
rs5c372 0-0032: chip found, driver version 0.1
rs5c372 0-0032: rtc intf: sysfs
rs5c372 0-0032: rtc intf: dev (254:0)
rs5c372 0-0032: rtc core: registered rs5c372 as rtc0
Registered led device: power
Registered led device: usbcopy-1
Registered led device: usbcopy-2
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rs5c372 0-0032: setting the system clock to 2006-02-12 05:33:36 (1139722416)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 84K
kjournald starting. Commit interval 5 seconds
INIT: version 2.86 booting
SlugOS booting...
Badness in dma_free_coherent at arch/arm/mm/consistent.c:351
[<c0022d80>] (dump_stack+0x0/0x14) from [<c0024ce8>] (dma_free_coherent+0x38/0x254)
[<c0024cb0>] (dma_free_coherent+0x0/0x254) from [<c00289bc>] (dma_unmap_sg+0x1a0/0x1e8)
[<c002881c>] (dma_unmap_sg+0x0/0x1e8) from [<c0156300>] (ata_qc_complete+0x118/0x224)
[<c01561e8>] (ata_qc_complete+0x0/0x224) from [<c0157f20>] (ata_interrupt+0x13c/0x198)
r8 = C3CD72A0 r7 = C03D2280 r6 = C03D274C r5 = C03D2280
r4 = 00000050
[<c0157de4>] (ata_interrupt+0x0/0x198) from [<c001eb04>] (__do_irq+0x68/0xac)
[<c001ea9c>] (__do_irq+0x0/0xac) from [<c001ed64>] (do_level_IRQ+0x70/0xc0)
r8 = C027BF58 r7 = 00000002 r6 = C027BF58 r5 = 0000001C
r4 = C02D89B0
[<c001ecf4>] (do_level_IRQ+0x0/0xc0) from [<c001ee04>] (asm_do_IRQ+0x50/0x148)
r6 = 10000000 r5 = 0000001C r4 = C02D89B0
[<c001edb4>] (asm_do_IRQ+0x0/0x148) from [<c001d978>] (__irq_svc+0x38/0x70)
[<c001f870>] (default_idle+0x0/0x4c) from [<c001f91c>] (cpu_idle+0x60/0x9c)
[<c001f8bc>] (cpu_idle+0x0/0x9c) from [<c001d038>] (__init_end+0x38/0x40)
r6 = C027DC1C r5 = C02D8AFC r4 = C02E0B28
[<c001d000>] (__init_end+0x0/0x40) from [<c0008928>] (start_kernel+0x134/0x170)
[<c00087f4>] (start_kernel+0x0/0x170) from [<00008094>] (0x8094)
Creating initial device nodes...