rendered paste bodyYAMON ROM Monitor, Revision 02.17mtx1.
Copyright (c) 1999-2000 MIPS Technologies, Inc. - All Rights Reserved.
For a list of available commands, type 'help'.
Compilation time = May 19 2005 14:21:19
MAC address = 00.0e.56.00.03.d8
Processor Company ID = 0x03
Processor ID/revision = 0x02 / 0x02
Endianness = Little
CPU = 396 MHz
Flash memory size = 32 MByte
SDRAM size = 64 MByte
First free SDRAM address = 0x8008c8f4
MTX-1 Watchdog support
Environment variable 'start' exists. After 4.0 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C to bypass this.
General Purpuse Button is Released
YAMON> erase -s
Erasing...system...
Done
YAMON> erase 0xbfd00000 0xf0000
what...
The following area will be erased:
Start address = 0x1fd00000
Size = 0x00100000
Confirm ? (y/n) y
Erasing...Done
YAMON> setenv
MAC (R/W) 0
bootfile (R/W)
bootprot (R/W) tftp
bootserport (R/W) tty0
bootserver (R/W) 141.28.228.183
cubeID (USER) 986
ethaddr (R/W) 00.0e.56.00.03.d8
gateway (R/W) 0.0.0.0
ipaddr (R/W) 141.28.228.139
memsize (RO) 0x04000000
modetty0 (RO) 115200,n,8,1,none
modetty1 (RO) 115200,n,8,1,none
prompt (R/W) YAMON
serial (USER) 051218312
start (R/W) go 0xbfd00000 rootfstype=jffs2 root=/dev/mtdblock/0
subnetmask (R/W) 255.255.255.0
YAMON> setenv bootserver 141.28.228.134
YAMON> load /openwrt-au1000-2.6-jffs2-128k.img
About to load tftp://141.28.228.134/openwrt-au1000-2.6-jffs2-128k.img
Press Ctrl-C to break
Error : ARP-timeout, no reponse on ARP-request
Hint : Check cable and IP-address of remote host
YAMON> load /openwrt-au1000-2.6-jffs2-128k.img
About to load tftp://141.28.228.134/openwrt-au1000-2.6-jffs2-128k.img
Press Ctrl-C to break
........................................
........................................
........................................
........................................
........................................
........................................
......................
Start = 0xbfd00000, range = (0xbe000000,0xbfdcbf0b), format = SREC
YAMON> $start
Linux version 2.6.19.2 (andreas@bofh) (gcc version 4.1.2) #1 Sat Mar 24 12:54:31 CET 2007
CPU revision is: 01030202
4G Systems MTX-1 Board
(PRId 01030202) @ 396MHZ
BCLK switching enabled!
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 16256
Kernel command line: rootfstype=jffs2 root=/dev/mtdblock/0 console=ttyS0,115200
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
calculating r4koff... 00182b80(1584000)
CPU frequency 396.00 MHz
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61128k/65536k available (2197k kernel code, 4344k reserved, 310k data, 128k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Generic PHY: Registered new driver
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
MTX-1 System Button driver
MTX-1 watchdog driver
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.8: ttyS0 at MMIO 0x11100000 (irq = 0) is a 16550A
serial8250.8: ttyS1 at MMIO 0x11400000 (irq = 3) is a 16550A
au1000_eth version 1.6 Pete Popov <ppopov@embeddedalley.com>
eth0: Au1xx0 Ethernet found at 0x11500000, irq 28
au1000_eth_mii: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
MTX-1 flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 4 MTD partitions on "MTX-1 flash":
0x00000000-0x01c00000 : "filesystem"
0x01c00000-0x01d00000 : "yamon"
0x01d00000-0x01fc0000 : "kernel"
0x01fc0000-0x02000000 : "yamon env"
Registered led device: mtx1:green
Registered led device: mtx1:red
ip_conntrack version 2.4 (512 buckets, 4096 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
No filesystem could mount root, tried: <6>Time: MIPS clocksource has been installed.
jffs2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)