rendered paste bodyRedBoot> load -r -v -b 0x01000000 -m xmodem
Raw file loaded 0x01000000-0x01148d7f, assumed entry at 0x01000000
xyzModem - CRC mode, 10524(SOH)/0(STX)/0(CAN) packets, 2 retries
RedBoot> go
Uncompressing Linux......................................................................................... done, booting t.Linux version 2.6.16-rc2-git8 (repvik@Ximinez) (gcc version 3.4.4) #8 Sat Feb 11 00:41:51 CET 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Synology DiskStation DS101
Warning: bad configuration page, trying to continue
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/sda1 rootfstype=ext3 init=/sbin/init root=/dev/sda2 ro rootdelay=7 rootfstype=ext3 noinitrd n0PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 61988KB available (2269K code, 460K data, 84K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:02.0 on pci bus
dmabounce: registered device 0000:00:02.1 on pci bus
dmabounce: registered device 0000:00:02.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1062 bmdma 0x1040 irq 28
ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1066 bmdma 0x1048 irq 28
ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x105F
ata2: disabling port
scsi1 : pata_artop
Vendor: ATA Model: Maxtor 6L160P0 Rev: BAH4
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
IXP4XXFlash: map_probe failed
Using configured DiskOnChip probe address 0x50000
PCI: enabling device 0000:00:02.2 (0140 -> 0142)
ehci_hcd 0000:00:02.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.2 setup!
ehci_hcd 0000:00:02.2: init 0000:00:02.2 fail, -19
USB Universal Host Controller Interface driver v2.3
PCI: enabling device 0000:00:02.0 (0140 -> 0141)
PCI: Via IRQ fixup for 0000:00:02.0, from 27 to 11
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.0: irq 27, io base 0x00001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: enabling device 0000:00:02.1 (0140 -> 0141)
uhci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
uhci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver catc
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
i2c /dev entries driver
Registered led device: wlan
Registered led device: ready
Registered led device: disk-1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 7sec before mounting root device...
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 84K
INIT: version 2.86 booting
SlugOS booting...
Creating initial device nodes...
hwclock: Could not access RTC: No such file or directory
EXT3 FS on sda2, internal journal
WARNING: Couldn't open directory /lib/modules/2.6.16-rc2-git8: No such file or directory
FATAL: Could not open /lib/modules/2.6.16-rc2-git8/modules.dep.temp for writing: No such file or directory
Starting syslogd/klogd: done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCGIFFLAGS: No such device
route: SIOC[ADD|DEL]RT: No such device
done.
Starting portmap daemon: portmap.
Nothing to be done
INIT: Entering runlevel: 3
Starting Dropbear SSH server: dropbear.
DebianSlug 3.6-beta pioneer ttyS0
pioneer login: root
Password:
root@pioneer:~# ls /dev/
bus initctl mem pts sda1 ttyS1 zero
console kmem null random sda2 urandom
full kmsg port rtc tty usbdev1.1
i2c-0 log ptmx sda ttyS0 watchdog