// WIFI
wifi_netmask=255.255.255.0
wifi_proto=static
wifi_ipaddr=192.168.1.130
wifi_ifname=eth1
wl0_akm=none
wl0_infra=1
wl0_ifname=eth1
wl0_mode=wet
wl0_ssid=outpost.bourn.retina
wl0_closed=0
wl0_macmode=disabled
wl0_lazywds=0
wl0_antdiv=-1
wl0_wds=00:09:5b:b9:ef:c3
wl0_wep=disabled
wl0_radio=1
wl0_maclist=
wl0_channel=10
wl0_crypto=tkip
// LAN
lan_gateway=192.168.123.161
lan_netmask=255.255.255.0
lan_ifnames=vlan0
lan_ipaddr=192.168.123.160
lan_proto=static
lan_ifname=br0
// WAN # disabled for the moment
wan_device=vlan1
wan_proto=static
wan_ifname=vlan1
// output from iwlist eth1 scanning
eth1 Scan completed :
Cell 01 - Address: 00:09:5B:B9:EF:C3
ESSID:"myap"
Mode:Master
Channel:10
Quality:0/0 Signal level:-60 dBm Noise level:-91 dBm
Encryption key:off
Bit Rate:1 Mb/s
Bit Rate:2 Mb/s
Bit Rate:5.5 Mb/s
Bit Rate:11 Mb/s
Bit Rate:6 Mb/s
Bit Rate:9 Mb/s
Bit Rate:12 Mb/s
Bit Rate:18 Mb/s
Bit Rate:24 Mb/s
Bit Rate:36 Mb/s
Bit Rate:48 Mb/s
Bit Rate:54 Mb/s
// what I want to do
What Im trying to do is use the box to connect the lan wired ports to my ap ( no encryption atm)
Or
set it as a repeater
and place it in the center between the client(bad signal) repeater(wrtbox) ap(netgear wg302)