rendered paste body
[FLASH:] MACRONIX Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 127 sectors a 64kB)
[FLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz
AVM_Ar7 >go
.............done
start kernel
Launching kernel decompressor.
Kernel decompressor was successful ... launching kernel.
[ohio_pre_init] System Clk = 62500000 Hz
LINUX started...
Linux version 2.6.13.1-ohio (root@Duron) (gcc version 3.4.5) #32 Thu Mar 22 14:43:49 CET 2007
memsize=32 MByte
flashsize=8 MByte
&_end=0x94272574 PFN_ALIGN(&_end)=0x94273000 CPHYSADDR(PFN_ALIGN(&_end))=0x14273000 memsize=00
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
memory: 00273000 @ 14000000 (reserved)
memory: 01d8d000 @ 14273000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94276000-0x942b6020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93ff6000-0x942b6020
DMA zone: 8192 pages, LIFO batch:3
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x942283ac
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x94246580.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x94246780.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94246980.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 127 irqaction->handler 0x94040f70 ()
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29884k/30260k available (1780k kernel code, 320k reserved, 315k data, 224k init, 0k h)
totalram_pages= 7485
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Can't analyze prologue code at 941bb9c0
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
[avm_power]Ohio250 detected -> overclocking possible
[avm] configured: eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x94201780 port->cons->flags = 0x7
[uart_add_one_port] success
io scheduler noop registered
[setup_irq]: irq 10 irqaction->handler 0x941145ac ()
[cpmac] cpmac_if_register, dev cpmac0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
[mtd_do_chip_probe] map 94202f50
[genprobe_ident_chips] map name phys_mapped_flash
[genprobe_new_chip] map 0x94202f50 map->size 0x400000 map->name phys_mapped_flash
[genprobe_new_chip] min_chips 1 max_chips 2
[genprobe_new_chip] cfi->interleave 1
[genprobe_new_chip] map_bankwidth 2 type 2
[genprobe_new_chip] call probe_chip
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] cfi.cfiq->DevSize 23
[genprobe_ident_chips] 3 cfi.numchips 1 max_chips 0
[mtd_do_chip_probe] check_cmd_set
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
[mtd_do_chip_probe] map 94203054
[genprobe_ident_chips] map name Ohio flash memory
[genprobe_new_chip] map 0x94203054 map->size 0x800000 map->name Ohio flash memory
[genprobe_new_chip] min_chips 1 max_chips 2
[genprobe_new_chip] cfi->interleave 1
[genprobe_new_chip] map_bankwidth 2 type 2
[genprobe_new_chip] call probe_chip
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] cfi.cfiq->DevSize 23
[genprobe_ident_chips] 3 cfi.numchips 1 max_chips 1
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
[mtd_do_chip_probe] check_cmd_set
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes)
ohio_flash_map.virt 0xb0000000
ohio_ram_map.virt 0x00000000
[ohio_find_hidden_filesystem] start=0x10000 end=0x780000 size=0x770000
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x3fa68f/4171407
[init_ohio_flash] find hidden filesystem size=0x6a8e00 offset=0xd7200
[mtd] configure jffs2 partition
[mtd] fs_size=0x4d0000 max=0x2a0000 is=0x200000 max jffs2_size value 42
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size0
partition_info[0]: name=filesystem offset=d7200 size=6a8e00
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[5]: name=jffs2 offset=580000 size=200000
partition_info[6]: name=Kernel without jffs2 offset=10000 size=570000
Creating 7 MTD partitions on "Ohio flash memory":
0x000d7200-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x00580000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x00010000-0x00580000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
capifs: Rev 1.1.2.3
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
[setup_irq]: irq 1 irqaction->handler 0x94001590 ()
[setup_irq]: irq 6 irqaction->handler 0x940015a4 ()
[ohio_late_init]
[avm_new] push_button_gpio=8 value=1 enabled
[tffs] alloc_chrdev_region() param=mtd4
[tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5
[tffs] Character device init successfull
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
tffsd: wait for events
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 224k freed (7541 free)
[setup_irq]: irq 15 irqaction->handler 0x940fd300 ()
[avm_led_load_config] Could not open config file
Algorithmics/MIPS FPU Emulator v1.5
3Loading, please wait...
use lzma compression
Mounted mtdblock1 to sysroot
run-init now
[setup_irq]: irq 15 irqaction->handler 0x940fd300 ()
[setup_irq]: irq 15 irqaction->handler 0x940fd300 ()
init started: BusyBox v1.1.2 (2006.11.23-09:19+0000) multi-call binary
[setup_irq]: irq 15 irqaction->handler 0x940fd300 ()
/etc/init.d/rc.S: /etc/init.d/rc.S: 75: cannot create /dev/watchdog: No such device or address
WARNING: TFFS Name Table update ! (current @7 new @8)
HWRevision 94.1.0.0
ProductID Fritz_Box_7170
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.136
bootserport tty0
bluetooth 00:04:0E:FF:FF:07
cpufrequency 211968000
firstfreeaddress 0x946AD700
firmware_version avm
firmware_info 29.04.29
flashsize 0x00800000
maca 00:15:0C:AD:4E:76
macb 00:15:0C:AD:4E:77
macwlan 00:15:0C:AD:4E:78
macdsl 00:15:0C:AD:4E:79
memsize 0x02000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x90780000
mtd2 0x90000000,0x90010000
mtd3 0x90780000,0x907C0000
mtd4 0x907C0000,0x90800000
my_ipaddress 192.168.178.2
prompt AVM_Ar7
ptest
reserved 00:04:0E:FF:FF:00
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1136
usb_board_mac 00:15:0C:AD:4E:7A
usb_rndis_mac 00:15:0C:AD:4E:7B
usb_device_id 0x3D00
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 3570803993462437
wlan_cal 03F4,03E2,0017,00F8,010A,00FA,010A,0328,0328
HWRevision='94'
HWRevision_ATA='1'
HWRevision_BitFileCount=''
HWRevision_Reserved1='0'
ANNEX='B'
OEM='avm'
OEM_DEFAULT_INDEX=''
OEM_tmp='avm'
Language='de'
Country='049'
TZ='CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00'
CONFIG_AB_COUNT='3'
CONFIG_ACCESSORY_URL='http://www.avm.de/fritzbox_apps.php?hardware=94&oem=avm&language=de&cou'
CONFIG_ANNEX='B'
CONFIG_ASSIST='y'
CONFIG_ATA='y'
CONFIG_ATA_FULL='n'
CONFIG_AUDIO='n'
CONFIG_AURA='n'
CONFIG_BLUETOOTH='n'
CONFIG_BLUETOOTH_CTP='n'
CONFIG_BUTTON='y'
CONFIG_CAPI='y'
CONFIG_CAPI_MIPS='n'
CONFIG_CAPI_NT='y'
CONFIG_CAPI_POTS='y'
CONFIG_CAPI_TE='y'
CONFIG_CAPI_UBIK='n'
CONFIG_CAPI_XILINX='y'
CONFIG_CDROM='n'
CONFIG_CDROM_FALLBACK='n'
CONFIG_DECT='n'
CONFIG_DSL='y'
CONFIG_ECO='n'
CONFIG_ENVIRONMENT='/var/env'
CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader'
CONFIG_ETH_COUNT='4'
CONFIG_FIRMWARE_URL='http://www.avm.de/fritzbox-firmware-update.php?hardware=94&oem=avm&langu'
CONFIG_FON='y'
CONFIG_FONGUI2='n'
CONFIG_FONQUALITY='y'
CONFIG_HOMEI2C='n'
CONFIG_HOSTNAME='fritz.fonwlan.box'
CONFIG_I2C='n'
CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_3ab_isdn_nt_te_pots_wlan_usb_host_25762'
CONFIG_JFFS2='n'
CONFIG_KIDS='y'
CONFIG_LED_NO_DSL_LED='y'
CONFIG_MAILER='y'
CONFIG_MEDIACLI='n'
CONFIG_MEDIASRV='n'
CONFIG_NAND='n'
CONFIG_NFS='n'
CONFIG_OEM_DEFAULT='avm'
CONFIG_PRODUKT='Fritz_Box_7170_26'
CONFIG_PRODUKT_NAME='FRITZ!Box Fon WLAN 7170'
CONFIG_RAMSIZE='32'
CONFIG_RELEASE='1'
CONFIG_ROMSIZE='8'
CONFIG_SAMBA='n'
CONFIG_SERVICEPORTAL_URL='http://www.avm.de/fritzbox-service-portal.php?hardware=94&oem=avm&l'
CONFIG_STOREUSRCFG='y'
CONFIG_SUBVERSION=''
CONFIG_SWAP='y'
CONFIG_TAM='n'
CONFIG_TAM_MODE='0'
CONFIG_TR069='y'
CONFIG_UBIK2='n'
CONFIG_UPNP='y'
CONFIG_USB='n'
CONFIG_USB_HOST_AVM='y'
CONFIG_USB_HOST_TI='n'
CONFIG_USB_PRINT_SERV='y'
CONFIG_USB_STORAGE='y'
CONFIG_USB_WLAN_AUTH='y'
CONFIG_VDSL='n'
CONFIG_VERSION='04.29'
CONFIG_VERSION_MAJOR='29'
CONFIG_VLYNQ='y'
CONFIG_VLYNQ0='3'
CONFIG_VLYNQ1='0'
CONFIG_VLYNQ_PARAMS='vlynq_reset_bit_0=17'
CONFIG_VPN='n'
CONFIG_WLAN='y'
CONFIG_WLAN_1130TNET='n'
CONFIG_WLAN_1350TNET='y'
CONFIG_WLAN_GREEN='n'
CONFIG_WLAN_IPTV='n'
CONFIG_WLAN_WDS='y'
CONFIG_WLAN_WMM='y'
CONFIG_XILINX='y'
set 'Activate Wizzard'
mknod: /var/flash/ar7.cfg: File exists
cp /etc/default.049/fx_moh.default /var/fx_moh
checkempty: : No such file or directory
checkempty: warning, /var/flash/voip.cfg not found - nop
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=7500 key=button_key_2
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc004ecec)
[tiatm] Set StrictPriority=0
DSP binary filesize = 303784 bytes
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[setup_irq]: irq 23 irqaction->handler 0xc003b208 ()
[setup_irq]: irq 31 irqaction->handler 0xc003b238 ()
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.06.04.38]
Unhandled kernel unaligned access in arch/mips/kernel/unaligned.c::emulate_load_store_insn, l:
Cpu 0
$ 0 : 00000000 1000ce00 940f0690 00000000
$ 4 : fffffffa 00000010 00000000 c003cc7c
$ 8 : 00000004 00000000 00000000 00000000
$12 : 00000000 ffffffff 00000000 00000000
$16 : 00000010 c0050000 00000010 00000000
$20 : c0050000 c0050000 00000000 94240040
$24 : 00000000 940d62e0
$28 : 95da4000 95da5c38 00000001 940eddd0
Hi : 00000000
Lo : 00000000
epc : 940ed478 Tainted: P
ra : 940eddd0 Status: 1000ce02 KERNEL EXL
Cause : 90800010
BadVA : 00000076
PrId : 00018448
Modules linked in: tiatm Piglet
Process lsmod (pid: 386, threadinfo=95da4000, task=95d4b7d0)
Stack : 95da5c48 00000010 00000002 00000000 fffffffa 940edfa8 00000000 00000000
c0050000 00000001 c0050000 00000000 00000010 c0050000 c0050000 c003d71c
94240070 95d4b7d0 9400eb84 9400eb1c 943e6cc0 00000000 00000000 0000001f
95da5d30 10001900 c003b250 00000000 95da5d38 00030002 00000000 94301060
94040fdc 95da5d38 95da5df8 95f5ea00 95da5f30 940468dc 9420b3e0 0000001f
...
Call Trace: [<940edfa8>] [<c003d71c>] [<9400eb84>] [<9400eb1c>] [<c003b250>] [<94040fdc>
Code: 8c421b10 03e00008 8c820000 <03e00008> 8c82007c 03e00008 8c820000 27bdffd8 afb1001
Call Trace: [<94023c38>] [<94026440>] [<9400bad8>] [<9400c7fc>] [<9400c7d0>] [<94029d3c>
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Rebooting in 5 seconds..