rendered paste body# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
# Dual screen (high-res on external screen)
Option "DefaultServerLayout" "Xinerama"
# Vesa ... compatible anything ;) just in case.
#Option "DefaultServerLayout" "Vesa Layout"
# Xen (high resolution on CRT. Not dual screen, no i915 patching)
#Option "DefaultServerLayout" "CRT Only Layout"
#Cloned display on both LCD and CRT (at 1024x768).
#(It's the only mode where you can disconnect you external screen).
#Option "DefaultServerLayout" "Default Layout"
EndSection
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "Extensions"
#FP add
#Option "Composite" "Enable"
#FP "composite" seems to disable GLX by default (avoid bugs)
## in "Device" section, use: Option "AllowGLXWithComposite" "true"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "en"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
#FP add:
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
#FP enable this to let Fn-F8 work
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "CMV 938D"
HorizSync 28-72
VertRefresh 43-60
Option "DPMS"
EndSection
# ############ VESA LAYOUT ################
Section "Device"
Identifier "Vesa compatible Controller"
Driver "vesa"
# BusID "PCI:0:2:0"
#FP add (as the name implies... clone CRT screen on LCD)
# Option "MonitorLayout" "CRT,LFP"
# Option "Clone" "true"
EndSection
Section "Screen"
Identifier "Vesa Screen"
Device "Vesa compatible Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Vesa Layout"
Screen "Vesa Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
# ############ DEFAULT LAYOUT ################
Section "Device"
Identifier "Intel 945 Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
#FP add (as the name implies... clone CRT screen on LCD)
Option "MonitorLayout" "CRT,LFP"
Option "Clone" "true"
#If using composite, try using this too
#Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel 945 Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
# ############ CRT LAYOUT ################
Section "Device"
Identifier "Intel 945 Graphics Controller -CRT Only"
Driver "i810"
# BusID "PCI:0:2:0"
#FP add (as the name implies... clone CRT screen on LCD)
Option "MonitorLayout" "CRT,NONE"
# Option "Clone" "true"
EndSection
Section "Screen"
Identifier "Default Screen -CRT Only"
Device "Intel 945 Graphics Controller -CRT Only"
Monitor "CMV 938D"
#Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1200v1" "1920x1200v2" "1920x1200" "1600x1200" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "CRT Only Layout"
Screen "Default Screen -CRT Only"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
# ################# XINERAMA #####################
Section "Device"
Identifier "Intel 945 Graphics Controller Screen0"
Driver "i810"
BusID "PCI:0:2:0"
Option "MonitorLayout" "CRT,LFP"
Screen 0
EndSection
Section "Device"
Identifier "Intel 945 Graphics Controller Screen1"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
EndSection
Section "Screen"
Identifier "InternalScreen14"
Device "Intel 945 Graphics Controller Screen0"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "ExternalScreen24"
Device "Intel 945 Graphics Controller Screen1"
Monitor "CMV 938D"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900"#"1920x1200" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Xinerama"
Screen 0 "InternalScreen14" 0 0
Screen 1 "ExternalScreen24" RightOf "InternalScreen14"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
Option "Xinerama" "true"
EndSection
# ################ MISC ################"
Section "DRI"
Mode 0666
EndSection