All pastes #404981 Raw Edit

Someone

public text v1 · immutable
·published 2007-03-21 12:28 UTC
rendered paste body
[42949454.130000] qla2xxx 0000:13:00.0: Found an ISP2432, irq 169, iobase 0xf884c000
[42949454.130000] qla2xxx 0000:13:00.0: Configuring PCI space...
[42949454.130000] PCI: Setting latency timer of device 0000:13:00.0 to 64
[42949454.130000] qla2xxx 0000:13:00.0: Configure NVRAM parameters...
[42949454.140000] qla2xxx 0000:13:00.0: Verifying loaded RISC code...
[42949454.380000] qla2xxx 0000:13:00.0: Allocated (1061 KB) for firmware dump...
[42949454.440000] qla2xxx 0000:13:00.0: Waiting for LIP to complete...
[42949454.970000] qla2xxx 0000:13:00.0: LIP reset occured (f700).
[42949456.050000] qla2xxx 0000:13:00.0: LOOP UP detected (4 Gbps).
[42949456.170000] qla2xxx 0000:13:00.0: Topology - (F_Port), Host Loop address 0x0
[42949456.510000] scsi2 : qla2xxx
[42949456.510000] qla2xxx 0000:13:00.0:
[42949456.510000]  QLogic Fibre Channel HBA Driver: 8.01.04-k
[42949456.510000]   QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel
[42949456.510000]   ISP2432: PCIe (2.5Gb/s x4) @ 0000:13:00.0 hdma-, host#=2, fw=4.00.26 [IP]
[42949456.510000] ACPI: PCI Interrupt 0000:13:00.1[B] -> GSI 17 (level, low) -> IRQ 177
[42949456.510000]   Vendor: COMPAQ    Model: MSA1000           Rev: 5.10
[42949456.510000]   Type:   RAID                               ANSI SCSI revision: 04
[42949456.510000] qla2xxx 0000:13:00.1: Found an ISP2432, irq 177, iobase 0xf884e000
[42949456.510000] qla2xxx 0000:13:00.1: Configuring PCI space...
[42949456.510000] PCI: Setting latency timer of device 0000:13:00.1 to 64
[42949456.510000] qla2xxx 0000:13:00.1: Configure NVRAM parameters...
[42949456.520000] qla2xxx 0000:13:00.1: Verifying loaded RISC code...
[42949456.520000]  2:0:0:0: Attached scsi generic sg0 type 12
[42949456.740000] qla2xxx 0000:13:00.1: Allocated (1061 KB) for firmware dump...
[42949456.800000] qla2xxx 0000:13:00.1: Waiting for LIP to complete...
[42949457.330000] qla2xxx 0000:13:00.1: LIP reset occured (f700).
[42949458.410000] qla2xxx 0000:13:00.1: LOOP UP detected (4 Gbps).
[42949458.510000] qla2xxx 0000:13:00.1: Topology - (F_Port), Host Loop address 0x0
[42949458.930000] scsi3 : qla2xxx
[42949458.930000] qla2xxx 0000:13:00.1:
[42949458.930000]  QLogic Fibre Channel HBA Driver: 8.01.04-k
[42949458.930000]   QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel
[42949458.930000]   ISP2432: PCIe (2.5Gb/s x4) @ 0000:13:00.1 hdma-, host#=3, fw=4.00.26 [IP]
[42949458.950000]   Vendor: COMPAQ    Model: MSA1000           Rev: 5.10
[42949458.950000]   Type:   RAID                               ANSI SCSI revision: 04
[42949458.950000]  3:0:0:0: Attached scsi generic sg1 type 12