rendered paste body[ 0.000000] Linux version 2.6.20-12-generic (root@vernadsky) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 18 03:07:14 UTC 2007 (Ubuntu 2.6.20-12.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000010000 end: 000000003ffd0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffd0000 size: 0000000000030000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffd0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262080
[ 0.000000] On node 0 totalpages: 262080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32449 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f9ed0
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x02000616 MSFT 0x00000097) @ 0x3ffc0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x02000616 MSFT 0x00000097) @ 0x3ffc0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x02000616 MSFT 0x00000097) @ 0x3ffc0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x02000616 MSFT 0x00000097) @ 0x3ffd0040
[ 0.000000] ACPI: DSDT (v001 A0128 A0128003 0x00000003 INTL 0x02002026) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 1808.829 MHz processor.
[ 30.571542] Built 1 zonelists. Total pages: 260033
[ 30.571545] Kernel command line: root=UUID=98b2d138-eefa-498a-a113-55da885356d9 ro quiet splash locale=sv_SE
[ 30.571694] mapped APIC to ffffd000 (fee00000)
[ 30.571696] mapped IOAPIC to ffffc000 (fec00000)
[ 30.571700] Enabling fast FPU save and restore... done.
[ 30.571702] Enabling unmasked SIMD FPU exception support... done.
[ 30.571711] Initializing CPU#0
[ 30.571758] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 30.571822] spurious 8259A interrupt: IRQ7.
[ 30.573378] Console: colour VGA+ 80x25
[ 30.573939] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 30.574460] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 30.597619] Memory: 1028148k/1048320k available (1990k kernel code, 19420k reserved, 890k data, 328k init, 130816k highmem)
[ 30.597630] virtual kernel memory layout:
[ 30.597631] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 30.597632] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 30.597634] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 30.597635] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 30.597636] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 30.597638] .data : 0xc02f1b24 - 0xc03d06d4 ( 890 kB)
[ 30.597639] .text : 0xc0100000 - 0xc02f1b24 (1990 kB)
[ 30.597642] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 30.675746] Calibrating delay using timer specific routine.. 3619.93 BogoMIPS (lpj=7239877)
[ 30.675790] Security Framework v1.0.0 initialized
[ 30.675798] SELinux: Disabled at boot.
[ 30.675814] Mount-cache hash table entries: 512
[ 30.675963] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[ 30.675972] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 30.675975] CPU: L2 Cache: 512K (64 bytes/line)
[ 30.675978] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[ 30.675990] Compat vDSO mapped to ffffe000.
[ 30.675995] Remapping vsyscall page to ffffe000
[ 30.676006] Checking 'hlt' instruction... OK.
[ 30.691896] SMP alternatives: switching to UP code
[ 30.692149] Freeing SMP alternatives: 11k freed
[ 30.692361] Early unpacking initramfs... done
[ 31.001483] ACPI: Core revision 20060707
[ 31.001966] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 31.003820] CPU0: AMD Athlon(tm) 64 Processor 2800+ stepping 00
[ 31.003834] Total of 1 processors activated (3619.93 BogoMIPS).
[ 31.003977] ENABLING IO-APIC IRQs
[ 31.004167] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 31.151707] Brought up 1 CPUs
[ 31.151927] Booting paravirtualized kernel on bare hardware
[ 31.151980] Time: 3:14:53 Date: 02/20/107
[ 31.152008] NET: Registered protocol family 16
[ 31.152084] EISA bus registered
[ 31.152088] ACPI: bus type pci registered
[ 31.152822] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 31.152824] PCI: Using configuration type 1
[ 31.152826] Setting up standard PCI resources
[ 31.162545] ACPI: Interpreter enabled
[ 31.162548] ACPI: Using IOAPIC for interrupt routing
[ 31.163428] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 31.163433] PCI: Probing PCI hardware (bus 00)
[ 31.163930] Boot video device is 0000:01:00.0
[ 31.164105] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 31.164156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 31.172806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 31.173092] ACPI: Power Resource [ISAV] (on)
[ 31.174254] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 31.174621] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *3
[ 31.174990] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *7
[ 31.175355] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 31.175737] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 31.176097] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5
[ 31.176456] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 31.176811] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 31.177169] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled.
[ 31.177525] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
[ 31.177882] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 31.178244] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 31.178600] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[ 31.178963] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 31.179382] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 31.179458] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.179466] pnp: PnP ACPI init
[ 31.183855] pnp: PnP ACPI: found 11 devices
[ 31.183858] PnPBIOS: Disabled by ACPI PNP
[ 31.183905] PCI: Using ACPI for IRQ routing
[ 31.183909] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.187116] NET: Registered protocol family 8
[ 31.187118] NET: Registered protocol family 20
[ 31.187918] pnp: 00:08: ioport range 0x480-0x487 has been reserved
[ 31.187921] pnp: 00:08: ioport range 0xd00-0xd07 has been reserved
[ 31.188137] PCI: Bridge: 0000:00:0b.0
[ 31.188140] IO window: d000-dfff
[ 31.188144] MEM window: ff000000-ff0fffff
[ 31.188148] PREFETCH window: ceb00000-eeafffff
[ 31.188152] PCI: Bridge: 0000:00:0e.0
[ 31.188154] IO window: e000-efff
[ 31.188157] MEM window: ff100000-ff5fffff
[ 31.188159] PREFETCH window: disabled.
[ 31.188169] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 31.188194] NET: Registered protocol family 2
[ 31.227744] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 31.227952] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 31.229172] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 31.229829] TCP: Hash tables configured (established 131072 bind 65536)
[ 31.229832] TCP reno registered
[ 31.239787] checking if image is initramfs... it is
[ 31.849740] Freeing initrd memory: 6738k freed
[ 31.850155] audit: initializing netlink socket (disabled)
[ 31.850169] audit(1174360494.360:1): initialized
[ 31.850230] highmem bounce pool size: 64 pages
[ 31.850284] VFS: Disk quotas dquot_6.5.1
[ 31.850302] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 31.850356] io scheduler noop registered
[ 31.850358] io scheduler anticipatory registered
[ 31.850360] io scheduler deadline registered
[ 31.850369] io scheduler cfq registered (default)
[ 31.850597] isapnp: Scanning for PnP cards...
[ 32.204162] isapnp: No Plug & Play device found
[ 32.224230] Real Time Clock Driver v1.12ac
[ 32.224272] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.224373] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.224854] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.225007] mice: PS/2 mouse device common for all mice
[ 32.225465] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.225680] input: Macintosh mouse button emulation as /class/input/input0
[ 32.225707] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.225711] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.225884] PNP: No PS/2 controller found. Probing ports directly.
[ 32.228546] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.228551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.228663] EISA: Probing bus 0 at eisa.0
[ 32.228678] Cannot allocate resource for EISA slot 4
[ 32.228680] Cannot allocate resource for EISA slot 5
[ 32.228688] EISA: Detected 0 cards.
[ 32.258771] TCP cubic registered
[ 32.258777] NET: Registered protocol family 1
[ 32.258794] Using IPI No-Shortcut mode
[ 32.258841] ACPI: (supports S0 S1 S3 S4 S5)
[ 32.258886] Magic number: 15:964:209
[ 32.258931] hash matches device ttyt7
[ 32.258942] hash matches device ttyqa
[ 32.259345] Freeing unused kernel memory: 328k freed
[ 32.259499] Time: tsc clocksource has been installed.
[ 33.519133] Capability LSM initialized
[ 34.071031] usbcore: registered new interface driver usbfs
[ 34.071054] usbcore: registered new interface driver hub
[ 34.071074] usbcore: registered new device driver usb
[ 34.071740] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 34.072120] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 34.072131] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 16
[ 34.072143] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.072146] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 34.072293] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 34.072310] ohci_hcd 0000:00:02.0: irq 16, io mem 0xff6fd000
[ 34.093649] SCSI subsystem initialized
[ 34.097847] libata version 2.20 loaded.
[ 34.169827] usb usb1: configuration #1 chosen from 1 choice
[ 34.169856] hub 1-0:1.0: USB hub found
[ 34.169866] hub 1-0:1.0: 4 ports detected
[ 34.206642] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 34.206646] e100: Copyright(c) 1999-2006 Intel Corporation
[ 34.273568] Floppy drive(s): fd0 is 1.44M
[ 34.275578] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 34.275590] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 17
[ 34.275602] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 34.275605] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 34.275626] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 34.275642] ohci_hcd 0000:00:02.1: irq 17, io mem 0xff6fe000
[ 34.323652] FDC 0 is a post-1991 82077
[ 34.337224] usb usb2: configuration #1 chosen from 1 choice
[ 34.337257] hub 2-0:1.0: USB hub found
[ 34.337271] hub 2-0:1.0: 4 ports detected
[ 34.443601] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 34.443613] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 18
[ 34.443624] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 34.443627] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 34.443654] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 34.443682] ehci_hcd 0000:00:02.2: debug port 1
[ 34.443685] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 34.443696] ehci_hcd 0000:00:02.2: irq 18, io mem 0xff6ffc00
[ 34.443702] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.443764] usb usb3: configuration #1 chosen from 1 choice
[ 34.443791] hub 3-0:1.0: USB hub found
[ 34.443799] hub 3-0:1.0: 8 ports detected
[ 34.554044] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 34.554056] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 34.588769] e100: eth0: e100_probe: addr 0xff5ff000, irq 19, MAC addr 00:03:47:DD:83:DD
[ 34.590173] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 34.590258] NFORCE3-250: chipset revision 162
[ 34.590260] NFORCE3-250: not 100% native mode: will probe irqs later
[ 34.590264] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 34.590269] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 34.590277] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 34.590287] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
[ 34.590294] Probing IDE interface ide0...
[ 34.883073] hda: ST340014A, ATA DISK drive
[ 35.167025] hdb: IC35L080AVVA07-0, ATA DISK drive
[ 35.223770] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 35.233740] Probing IDE interface ide1...
[ 35.438897] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 35.923410] usb 1-1: configuration #1 chosen from 1 choice
[ 36.230741] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 36.250813] hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
[ 36.251178] ide1 at 0x170-0x177,0x376 on irq 15
[ 36.260396] hda: max request size: 512KiB
[ 36.271859] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 36.274114] hda: cache flushes supported
[ 36.274160] hda: hda1 hda2 < hda5 hda6 >
[ 36.324163] hdb: max request size: 128KiB
[ 36.324327] hdb: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
[ 36.324494] hdb: cache flushes supported
[ 36.324517] hdb: hdb2 < hdb5 hdb6 >
[ 36.375742] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[ 36.375750] Uniform CD-ROM driver Revision: 3.20
[ 36.426757] usb 2-2: configuration #1 chosen from 1 choice
[ 36.429712] hub 2-2:1.0: USB hub found
[ 36.432678] hub 2-2:1.0: 4 ports detected
[ 36.705335] kjournald starting. Commit interval 5 seconds
[ 36.705346] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.788599] usb 2-2.1: new low speed USB device using ohci_hcd and address 3
[ 36.938635] usb 2-2.1: configuration #1 chosen from 1 choice
[ 37.204503] usb 2-2.4: new low speed USB device using ohci_hcd and address 4
[ 37.329551] usb 2-2.4: configuration #1 chosen from 1 choice
[ 45.313265] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 46.994498] Linux agpgart interface v0.101 (c) Dave Jones
[ 47.052648] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 47.054470] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 47.210087] NET: Registered protocol family 17
[ 47.551545] agpgart: Detected AGP bridge 0
[ 47.551561] agpgart: Setting up Nforce3 AGP.
[ 47.551565] agpgart: aperture base > 4G
[ 47.559087] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 47.559113] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 47.589726] Bluetooth: Core ver 2.11
[ 47.589790] NET: Registered protocol family 31
[ 47.589792] Bluetooth: HCI device and connection manager initialized
[ 47.589796] Bluetooth: HCI socket layer initialized
[ 47.622094] input: PC Speaker as /class/input/input1
[ 47.925547] gameport: EMU10K1 is pci0000:02:07.1/gameport0, io 0xec00, speed 1217kHz
[ 47.960521] Bluetooth: HCI USB driver ver 2.9
[ 48.096774] usbcore: registered new interface driver hci_usb
[ 48.097188] usbcore: registered new interface driver hiddev
[ 48.351401] input: Key Tronic Keytronic USB Keyboard as /class/input/input2
[ 48.351445] input: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:02.1-2.1
[ 48.427468] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[ 48.427541] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2.4
[ 48.427557] usbcore: registered new interface driver usbhid
[ 48.427560] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 48.676538] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 48.676552] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 20
[ 48.892436] fuse init (API version 7.8)
[ 48.954801] lp: driver loaded but no devices found
[ 49.221536] EXT3 FS on hda1, internal journal
[ 49.858644] NET: Registered protocol family 10
[ 49.858742] lo: Disabled Privacy Extensions
[ 49.923251] kjournald starting. Commit interval 5 seconds
[ 49.944397] EXT3 FS on hda6, internal journal
[ 49.944403] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.956305] kjournald starting. Commit interval 5 seconds
[ 49.956403] EXT3 FS on hdb5, internal journal
[ 49.956408] EXT3-fs: mounted filesystem with ordered data mode.