rendered paste bodyThe system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
root@OpenWrt:/# Sending SIGKILL Requesting system reboot.
Restarting system.
Please stand by while rebooting the system...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Jun 25 15:49:22 CST 2004 (root@Amin)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 0x2000000 bytes (32MB)
Total memory used by CFE: 0x80300000 - 0x8043DF30 (1302320)
Initialized Data: 0x803381A0 - 0x8033A550 (9136)
BSS Area: 0x8033A550 - 0x8033BF30 (6624)
Local Heap: 0x8033BF30 - 0x8043BF30 (1048576)
Stack Area: 0x8043BF30 - 0x8043DF30 (8192)
Text (code) segment: 0x80300000 - 0x803381A0 (229792)
Boot area (physical): 0x0043E000 - 0x0047E000
Relocation Factor: I:00000000 - D:00000000
Boot version: v3.2
The boot is CFE
mac_init(): Find mac [00:0F:66:C7:84:B6] in location 1
Nothing...
No eou key find
Device eth0: hwaddr 00-0F-66-C7-84-B6, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3740 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.19.2 (mj@anghammarad) (gcc version 4.1.2) #2 Mon Mar 19 23:11:08 CET 2007
CPU revision is: 00029007
ssb: Sonics Silicon Backplane found on address 0x18000000
ssb: BUG: Assertion failed (bus->board_vendor && bus->board_type) at: drivers/ssb/core.c:259:ssb_get_boardtype()
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x09, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x07, vendor 0x4243)
ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Device (cc 0x818, rev 0x01, vendor 0x4243)
ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x01, vendor 0x4243)
ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x01, vendor 0x4243)
ssb: Core 6 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
ssb: Core 7 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0812, irq 2 => 2
ssb: set_irq: core 0x0806, irq 3 => 3
ssb: set_irq: core 0x0817, irq 0 => 4
ssb: PCIcore in host mode found
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 8128
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 50.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29964k/32768k available (1968k kernel code, 2804k reserved, 275k data, 116k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
PCI: fixing up bridge
PCI: Fixing up device 0000:00:00.0
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
b44.c:v1.01 (Jun 16, 2006)
eth0: Broadcom 10/100BaseT Ethernet 00:0f:66:c7:84:b6
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0xd8098
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007e0000 : "linux"
0x000ef000-0x001e0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007e0000-0x00800000 : "nvram"
0x001e0000-0x007e0000 : "OpenWrt"
ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Time: MIPS clocksource has been installed.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'Linksys WRT54G/GS/GL'
Probing device eth0: [/home/mj/trunk/build_mipsel/linux-2.6-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
[/home/mj/trunk/build_mipsel/linux-2.6-brcm47xx/kmod-switch/switch-robo.c:91] SIOCGETCPHYRD failed!
No Robo switch in managed mode found
Probing device eth1: No such device
Probing device eth2: No such device
Probing device eth3: No such device
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
init started: BusyBox v1.4.1 (2007-03-19 22:49:27 CET) multi-call binary
Please press Enter to activate this console. b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
: [remove_child_by_pid]: Invalid child list passed (NULL).
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering forwarding state
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Probing device eth0: No Robo switch in managed mode found
Probing device eth1: No such device
Probing device eth2: No such device
Probing device eth3: No such device
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
: /etc/rc.common: /etc/config/network: 1: cannot create /proc/switch/eth0/enable: Directory nonexistent