rendered paste bodyroot@nslu2:~$ dmesg
<5>Linux version 2.6.20 (rwhitby@etch) (gcc version 4.1.1) #1 PREEMPT Wed Mar 14 07:03:37 CST 2007
<4>CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
<4>Machine: Linksys NSLU2
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 8192
<7> DMA zone: 64 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 8128 pages, LIFO batch:0
<7> Normal zone: 0 pages used for memmap
<4>CPU0: D VIVT undefined 5 cache
<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>Built 1 zonelists. Total pages: 8128
<5>Kernel command line: rtc-x1205.probe=0,0x6f init=/linuxrc root=/dev/mtdblock4 rootfstype=jffs2 rw noirqdebug console=ttyS0,115200n8
<6>IRQ lockup detection disabled
<4>PID hash table entries: 128 (order: 7, 512 bytes)
<4>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>Memory: 32MB = 32MB total
<5>Memory: 30244KB available (1948K code, 163K data, 92K init)
<7>Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<4>IXP4xx: Using 16MiB expansion bus window size
<4>PCI: IXP4xx is host
<4>PCI: IXP4xx Using direct access for memory space
<6>PCI: bus0: Fast back to back transfers disabled
<6>dmabounce: registered device 0000:00:01.0 on pci bus
<6>dmabounce: registered device 0000:00:01.1 on pci bus
<6>dmabounce: registered device 0000:00:01.2 on pci bus
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP established hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>TCP: Hash tables configured (established 1024 bind 512)
<6>TCP reno registered
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
<6>serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
<4>RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
<6>IXP4XX Q Manager 0.2.1 initialized.
<6>IXP4XX NPE driver Version 0.3.0 initialized
<6>ixp4xx_mac driver 0.3.1: eth0 on NPE-B with PHY[1] initialized
<6>NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
<6>IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
<7>IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
<4> Intel/Sharp Extended Query Table at 0x0031
<6>Using buffer write method
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>erase region 0: offset=0x0,size=0x20000,blocks=64
<5>Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
<5>6 RedBoot partitions found on MTD device IXP4XX-Flash.0
<5>Creating 6 MTD partitions on "IXP4XX-Flash.0":
<5>0x00000000-0x00040000 : "RedBoot"
<6>nslu2 mac: 00:04:5a:0f:b2:c6
<5>0x00040000-0x00060000 : "SysConf"
<5>0x00060000-0x00160000 : "Kernel"
<5>0x00160000-0x00180000 : "Ramdisk"
<5>0x00180000-0x007e0000 : "Flashdisk"
<5>0x007e0000-0x00800000 : "FIS directory"
<4>npe: searching for firmware...
<6>npe: found at 0x1c010, IXP425/NPE-B func: 00, rev: 2.1, size: 11964, id: 01000201
<6>Image loaded to NPE-B Func:0, Rel: 2:1, Status: 82c00000
<4>PCI: enabling device 0000:00:01.2 (0140 -> 0142)
<6>ehci_hcd 0000:00:01.2: EHCI Host Controller
<6>ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
<6>ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 5 ports detected
<6>Initializing USB Mass Storage driver...
<6>usb 1-1: new high speed USB device using ehci_hcd and address 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb 1-2: new high speed USB device using ehci_hcd and address 3
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 3
<7>usb-storage: waiting for device to settle before scanning
<6>input: ixp4xx beeper as /class/input/input0
<6>i2c /dev entries driver
<6>x1205 0-006f: chip found, driver version 1.0.7
<6>x1205 0-006f: rtc core: registered x1205 as rtc0
<6>Registered led device: ready
<6>Registered led device: status
<6>Registered led device: disk-1
<6>Registered led device: disk-2
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>XScale DSP coprocessor detected.
<6>Time: OSTS clocksource has been installed.
<6>x1205 0-006f: setting the system clock to 2007-03-16 04:57:40 (1174021060)
<4>VFS: Mounted root (jffs2 filesystem).
<6>Freeing init memory: 92K
<5>scsi 0:0:0:0: Direct-Access Imation Flash Drive 1.00 PQ: 0 ANSI: 2
<5>SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 0b 00 00 08
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 1003520 512-byte hdwr sectors (514 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 0b 00 00 08
<3>sda: assuming drive cache: write through
<6> sda: sda1 sda2
<5>sd 0:0:0:0: Attached scsi removable disk sda
<7>usb-storage: device scan complete
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<4>PCI: enabling device 0000:00:01.0 (0140 -> 0142)
<6>ohci_hcd 0000:00:01.0: OHCI Host Controller
<6>ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 3 ports detected
<4>PCI: enabling device 0000:00:01.1 (0140 -> 0142)
<6>ohci_hcd 0000:00:01.1: OHCI Host Controller
<6>ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
<6>ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<7>ieee80211_crypt: registered algorithm 'NULL'
<6>ieee80211: 802.11 data/management/control stack, git-1.1.13
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<6>zd1211rw 1-1:1.0: firmware version 4605
<6>zd1211rw 1-1:1.0: zd1211 chip 6891:a727 v4330 high 00-12-a9 RF2959_RF pa0 g---
<6>zd1211rw 1-1:1.0: eth1
<6>usbcore: registered new interface driver zd1211rw
<6>Adding 96380k swap on /dev/sda2. Priority:-1 extents:1 across:96380k
<6>Bluetooth: Core ver 2.11
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP ver 2.8
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
<7>Link of eth0 is full-duplex
<5>Bridge firewalling registered
<6>device eth0 entered promiscuous mode
<6>br0: port 1(eth0) entering learning state
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
<6>Bluetooth: BNEP filters: protocol multicast
<6>br0: topology change detected, propagating
<6>br0: port 1(eth0) entering forwarding state
<6>usb 1-1: USB disconnect, address 2
root@nslu2:~$