rendered paste bodybooting jffs2...
booting boot/zImage from partition >root<
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
build_list: max = 01FBFFBC
..
dir entries = 00000D33
frag entries = 00003379
+4 increments = 00000000
+file_offset increments = 00004103
loaded file of size = 0x000A8550 at location 0xA0008000
kernel partition base A0008000
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50040000 size=01FC0000 dest=A0000000 offset=00008000
MMU Control=00000079
MMU PIDVAM=00000000
Skipping kernel copy by request.
A0008000: E1A00000
A0008004: E1A00000
A0008008: E1A00000
A000800C: E1A00000
A0008010: E1A00000
A0008014: E1A00000
A0008018: E1A00000
A000801C: E1A00000
A0008020: EA000002
A0008024: 016F2818
root_filesystem_name=ramdisk
Grabbed linuxargs, argc = 00000001
Using mach_type 000000DC
setting boot parameters to
noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttyS0
Making core tag at A0000100
Making cmdline tag at A0000114
Making mem32 tag at A00001B4
command line is: mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro,0x01FC0000@0x00040000(root) noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttyS0 rootfstype=jffs2
Disabling LCD controller
linuxEntryPoint=A0008000
Booting Linux image
Uncompressing Linux........................................... done, booting the kernel.
Linux version 2.4.19-rmk6-pxa1-hh37 (bdavies@host32) (gcc version 3.3.3) #1 Sat Jan 8 12:08:07 EST 2005
CPU: XScale-PXA250 revision 4
Machine: HP iPAQ H5400
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Reserved 4096 bytes at a3fff000 for RTC hack
Restoring saved RCNR value to 1105135453 (from c3fff000)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro,0x01FC0000@0x00040000(root) noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttyS0 rootfstype=jffs2
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 63292KB available (1095K code, 327K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA250 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Changing CPU frequency to 398 Mhz (PXbus=99Mhz).
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Console: switching to colour frame buffer device 30x40
mq1100fb: fb0: MQ1100 frame buffer device 240x320-16bpp
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 14) is a PXA UART
ttyS01 at 0x0000 (irq = 13) is a PXA UART
ttyS02 at 0x0000 (irq = 12) is a PXA UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
iPAQ flash: probing 32-bit flash bus, window=c48c2000 with CFI.
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
iPAQ flash: found 33554432 bytes
iPAQ flash: probing 32-bit flash bus, window=c68c2000 with CFI.
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
iPAQ flash: found 16777216 bytes
2 cmdlinepart partitions found on MTD device ipaq
Using dynamic partition definition
Creating 2 MTD partitions on "ipaq":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x02000000 : "root"
mtd: Giving out device 1 to root
Creating 2 MTD partitions on "IPAQ flash bank 2":
0x00000000-0x00fc0000 : "second H3XXX root jffs2"
mtd: Giving out device 2 to second H3XXX root jffs2
0x00fc0000-0x01000000 : "second asset"
mtd: Giving out device 3 to second asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 68K
BusyBox v1.00 (2005.01.08-17:01+0000) multi-call binary
Usage: busybox [function] [arguments]...
or: [function] [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use, and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
[, ar, ash, awk, basename, bunzip2, busybox, bzcat, cat, chgrp,
chmod, chown, chroot, chvt, clear, cp, cpio, cut, date, dc, dd,
deallocvt, df, dirname, dmesg, du, dumpkmap, echo, egrep, env,
expr, false, fbset, fdisk, fgrep, find, free, fsck.minix, getkey,
grep, gunzip, gzip, head, hexdump, hostname, hwclock, id, ifconfig,
ifdown, ifup, insmod, ip, kill, killall, klogd,Kernel panic: Attempted to kill init!
ln, loadfont,
loadkmap, logger, logname, logread, losetup, ls , lsmod, md5sum,
mkdir, mkfifo, mkfs.minix, mknod, mkswap, mktemp, modprobe, more,
mount, mv, nc, netstat, nslookup, od, openvt, ping, ping6, pivot_root,
printf, ps, pwd, readlink, renice, reset, rm, rmdir, rmmod, route,
run-parts, sed, seq, sh, sleep, sort, start-stop-daemon, strings,
stty, swapoff, swapon, sync, syslogd, tail, tar, tee, telnet,
test, tftp, top, touch, tr, traceroute, true, tty, udhcpc, udhcpd,
umount, uname, uniq, unzip, uptime, vi, watch, wc, wget, which,
who, whoami, xargs, yes, zcat