#!/bin/sh
# Copyright 2001 BSDi, Inc, Concord, CA. Written by volkerdi@slackware.com.
# Copyright 2004 Slackware Linux, Inc., Concord, CA.
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Modified by rs Lange of Vector Linux. Formally called xorgsetup
vdir=`dirname $0`
. $vdir/vasm-functions
check_root
if [ $DISPLAY ]; then
DIALOG=Xdialog
else
DIALOG=dialog
fi
# If we aren't root, bail:
if [ "$UID" = "0" ]; then
TMP=/var/log/setup/tmp
else
clear
echo "Only root can configure X......bailing"
sleep 8
exit
fi
# Now, this wouldn't make much sense either:
if [ ! -x /usr/X11R6/bin/Xorg ]; then
echo "No X found so bailing............"
sleep 8
exit
fi
$DIALOG --title "CONFIGURE X SERVER" --yesno \
" X will attempt to probe for your video hardware and mouse, and \n
write an initial configuration file to /etc/X11/xorg.conf.\n
Would you like to do this now?" 10 66
if [ ! $? = 0 ]; then
exit
fi
if [ ! -d $TMP ]; then
mkdir -p $TMP
chmod 700 $TMP
fi
# OK, we'll warn the user if there's already an existing xorg.conf:
CONFIG_EXISTS=false
for xf86config in /etc/X11/xorg.conf /etc/xorg.conf /usr/X11R6/lib/X11/xorg.conf $HOME/xorg.conf ; do
if [ -r $xf86config ]; then
CONFIG_EXISTS=$xf86config
fi
done
if [ ! "$CONFIG_EXISTS" = "false" ]; then
$DIALOG --title "FOUND EXISTING xorg.conf in `dirname $CONFIG_EXISTS`" \
--msgbox "A previous X Window System configuration file has been found. \n
You can now reconfigure X, replacing the file with a new version (and \n
keeping a backup of the old file), or you can abort leaving the existing \n
config file in place. Hit ENTER to rename the xorg.conf file to \n
xorg.conf.backup and create a new one, or ESC to abort." 10 80
if [ ! $? = 0 ]; then
exit
fi
fi
# Have the X server create a default config file:
/usr/X11R6/bin/X -configure :2 2> /dev/null
if [ ! $? = 0 ]; then
# failure, bail.
exit
fi
# Move any existing config file(s) aside:
for xf86config in /etc/X11/xorg.conf /etc/xorg.conf /usr/X11R6/lib/X11/xorg.conf $HOME/xorg.conf ; do
if [ -r $xf86config ]; then
mv $xf86config ${xf86config}.backup
fi
done
##We may need horiz and vert refresh rates later so lets get them now
ddcxinfo -hsync > $TMP/hsync
ddcxinfo -vsync > $TMP/vsync
vert=`cat $TMP/vsync`
horiz=`cat $TMP/hsync`
if [ $vert = "0-0" ]; then
vert="40-90"
fi
if [ $horiz = "0-0" ]; then
horiz="31.5-64"
fi
# To force the nvidia module for a desired reolution
/bin/grep ^Driver /etc/X11/xorg.conf | grep "nv"
if [ $? == 0 ]; then
if [ -e /lib/modules/`uname -r`/kernel/drivers/video/nvidia.ko ]; then
echo module exists
if [ -e /lib/modules/`uname -r`/kernel/drivers/video/nvidia.ko ]; then
NV=`/bin/grep ^Driver /etc/X11/xorg.conf | grep "nv"|cut -d \" -f 2`
if [ "$NV" == "nv" ];then
sed s'/nv/nvidia/g' /etc/X11/xorg.conf >/etc/X11/xorg.conf.new
mv /etc/X11/xorg.conf.new /etc/X11/xorg.conf
fi
fi
# OK, so now that we have a default file in $HOME/xorg.conf.new
# we can set up a default color depth:
clear
$DIALOG --title "SELECT DEFAULT COLOR DEPTH" \
--menu "Now you may select a default color depth for the X server:" 13 70 6 \
"24" "24 bit True Color" \
"16" "16 bit Pseudo Color" \
"8" "8 bit 256 Color" \
"4" "4 bit 16 Color" \
"1" "1 bit Mono B/W" \
"none" "Go with driver default (usually 8-bit)" 2> $TMP/colordepth
if [ ! $? = 0 ]; then
rm -f $TMP/colordepth
exit 1
fi
depth=`cat $TMP/colordepth`
sleep 2
##############################################################
##now lets get a default screen resolution
clear
$DIALOG --title "SELECT DEFAULT MONITOR RESOLUTION" \
--menu "Please select your default screen resolution from the menu below. \n
The resolution selected should be the best your monitor will handle. \n
For most modern monitors a selection of 1024X768 is a good choice, older monitors \n
may only be able to do 800X600. Please select a resolution now." 16 70 6 \
"640x480" "The most basic vga monitor" \
"800x600" "Any SVGA monitor should be able to do this" \
"1024x768" "If you have a recent 15 or 17 inch monitor OK" \
"1280x1024" "Very new monitors or lcd screens" \
"1600x1200" "You know if you have this one...wow!" \
"none" "Choose this if you have no idea X will try to figure it out" 2> $TMP/resolution
if [ ! $? = 0 ]; then
rm -f $TMP/resolution
exit 1
fi
res=`cat $TMP/resolution`
##set resolution modes
if [ "$res" = "640x480" ]; then
finalres="Modes \"640x480\" \"800x600\""
fi
if [ "$res" = "800x600" ]; then
finalres="Modes \"800x600\" \"640x480\""
fi
if [ "$res" = "1024x768" ]; then
finalres="Modes \"1024x768\" \"800x600\" \"640x480\""
fi
if [ "$res" = "1280x1024" ]; then
finalres="Modes \"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""
fi
if [ "$res" = "1600x1200" ]; then
finalres="Modes \"1600x1024\" \"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""
fi
#check the keyboard
$DIALOG --title "KEEP DEFAULT KEYBOARD MAP AND LAYOUT" \
--yesno "Would you like to KEEP the default (US) keyboard setup? \n
if you choose NO you can change both the keymap and keyboard type\n
from the default Setting \
US and pc102" 8 70 2> /dev/null
if [ ! $? = 0 ]; then
vxkbset
fi
# I know this completely hoses the indentation of the xorg.conf file, but
# really don't know a good way around that. Shoulda used perl. ;)
START_LOOKING=false
rm -f /etc/X11/xorg.conf
. /etc/sysconfig/vector
cat $HOME/xorg.conf.new | grep -w " HorizSync" 1> /dev/null
if [ $? = 0 ]; then
echo "no" > $TMP/fixsync
else
echo "yes" > $TMP/fixsync
fi
fixsync=`cat $TMP/fixsync`
cat $HOME/xorg.conf.new | while read LINE ; do
echo "$LINE" >> /etc/X11/xorg.conf
if echo $LINE | grep Section | grep Screen 1> /dev/null ; then
START_LOOKING=true
fi
if [ "$START_LOOKING" = "true" ]; then
if echo $LINE | grep Monitor 1> /dev/null ; then
if [ ! "$depth" = "none" ]; then
echo "DefaultDepth $depth" >> /etc/X11/xorg.conf
fi
START_LOOKING=false
fi
fi
## add cyrillic fonts to font path
if echo $LINE | grep 100dpi 1> /dev/null ; then
echo "FontPath \"/usr/X11R6/lib/X11/fonts/truetype/\"
FontPath \"/usr/X11R6/lib/X11/fonts/local/\"
FontPath \"/usr/X11R6/lib/X11/fonts/cyrillic/\" " >> /etc/X11/xorg.conf
fi
##lets try a default resolution
if [ ! "$res" = "none" ]; then
if echo $LINE | grep ^Depth 1> /dev/null ; then
echo $finalres >> /etc/X11/xorg.conf
fi
fi
##now the wheel for a mouse
#if echo $LINE | grep Device | grep mouse 1> /dev/null ; then
# echo "Option \"ZAxisMapping\" \"4 5\"" >> /etc/X11/xorg.conf
#fi
##now keyboard setting if none us
if [ ! $XKBMAP ]; then
XKBMAP=us
fi
if [ $XKBMAP ]; then
if echo $LINE | grep Driver | grep kbd 1> /dev/null ; then
echo "Option \"XkbLayout\" \"$XKBMAP\" ## KEYBOARD_MAP!" >> /etc/X11/xorg.conf
fi
fi
if [ $XKBMODEL ]; then
if echo $LINE | grep Driver | grep kbd 1> /dev/null ; then
echo "Option \"XkbModel\" \"$XKBMODEL\"" >> /etc/X11/xorg.conf
fi
fi
if [ $XKBVAR ]; then
if echo $LINE | grep Driver | grep kbd 1> /dev/null ; then
echo "Option \"Xkbvariant\" \"$XKBVAR\"" >> /etc/X11/xorg.conf
fi
fi
##last monitor refresh if not auto detected
if [ "$fixsync" = "yes" ]; then
if echo $LINE | grep ModelName 1> /dev/null ; then
echo "HorizSync $horiz" >> /etc/X11/xorg.conf
fi
fi
if [ "$fixsync" = "yes" ]; then
if echo $LINE | grep ModelName 1> /dev/null ; then
echo "VertRefresh $vert" >> /etc/X11/xorg.conf
fi
fi
done
echo Section \"DRI\" >> /etc/X11/xorg.conf
echo Mode 0666 >> /etc/X11/xorg.conf
echo EndSection >> /etc/X11/xorg.conf
rm -f $TMP/colordepth
rm -f $TMP/resolution
rm -f $TMP/vsync
rm -f $TMP/hsync
rm -f $HOME/xorg.conf.new
clear
## Test for 2 video cards
if [ `grep "^Driver" /etc/X11/xorg.conf | grep -v kbd | grep -v mouse | wc | cut -d " " -f7` -gt 1 ]; then
cards=`grep "^Vendor" /etc/X11/xorg.conf | grep -v Mon | cut -d " " -f3 | cut -c 2-`
for i in $cards; do
echo $i >>/tmp/cards
card[$j]="$i"
j=`expr $j + 1`
done
$DCMD --backtitle "$BACKTITLE" --title "Choose Video Card" --menu "\n
We have found more than 1 video card, and for X to work \n
we need to know which card your monitor is connected to.\n
Choose which video card you would like to use" \
20 74 8 \
${card[0]} ${card[0]} \
${card[1]} ${card[1]} \
${card[2]} ${card[2]} \
2> $freply
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
card1=`cat $freply`
card2=`cat /tmp/cards | grep -v $card1`
sed '/Card[0-2]/ d' /etc/X11/xorg.conf > /etc/X11/xorg.conf.1
rm /etc/X11/xorg.conf
cat /etc/X11/xorg.conf.1 | while read LINE ; do
echo "$LINE" >> /etc/X11/xorg.conf.2
if echo $LINE | grep $card1 1> /dev/null ; then
echo Identifier \"Card0\" >> /etc/X11/xorg.conf.2
fi
if echo $LINE | grep Section | grep Screen 1> /dev/null ; then
echo Device \"Card0\" >> /etc/X11/xorg.conf.2
fi
done
cat /etc/X11/xorg.conf.2 | while read LINE ; do
echo "$LINE" >> /etc/X11/xorg.conf
if echo $LINE | grep $card2 1> /dev/null ; then
echo Identifier \"Card1\" >> /etc/X11/xorg.conf
fi
done
rm /tmp/cards
rm /etc/X11/xorg.conf.1
rm /etc/X11/xorg.conf.2
fi
### intel i810 video has a problem without this hack
cat /etc/X11/xorg.conf | grep Driver | grep i810 1> /dev/null
if [ $? = 0 ]; then
uname -r | cut -f 1,2 -d '.' > $TMP/kernel
kernel=`cat $TMP/kernel`
rm -f $TMP/kernel
if [ $kernel = "2.6" ]; then
/sbin/modprobe intel-agp && echo "/sbin/modprobe intel-agp" >> /etc/rc.d/rc.modules
fi
fi
echo "Testing configuration...........hold tight!!!!"
sleep 2
Xorg -probeonly :2 2> /dev/null
if [ $? = 0 ]; then
$DIALOG --title "X WAS CONFIGURED SUCCESSFULLY" \
--msgbox "Your new X configuration file has been saved to /etc/X11/xorg.conf.
You may still need to add or adjust some values in the file to achieve the desired
screen resolution. For example, some monitors would require \"HorizSync 30-55\" in
the \"Monitor\" section of the configuration file. For complete information about
making these adjustments, please refer to \"man xorg.conf\"." \
11 76
else
$DIALOG --title "ERROR ERROR" \
--yesno "There was an error in your X configuration. Would you like to edit the \n
/etc/X11/xorg.conf file as autoconfig must have stumbled somewhere? \n
Choosing yes here will start a text mode configuration utility. \n
Choose no if you wish to edit later from the installation." \
11 66 2> /dev/null
if [ $? = 0 ]; then
/usr/X11R6/bin/xorgcfg -textmode
fi
exit 1
fi