rendered paste body[17179580.192000] hub 4-0:1.0: 4 ports detected
[17179580.384000] Attempting manual resume
[17179580.456000] kjournald starting. Commit interval 5 seconds
[17179580.456000] EXT3-fs: mounted filesystem with ordered data mode.
[17179581.084000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[17179581.312000] usb 3-2: configuration #1 chosen from 1 choice
[17179594.084000] Linux Tulip driver version 1.1.14 (May 6, 2006)
[17179594.084000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179594.084000] tulip0: MII transceiver #1 config 1000 status 7849 advertising 05e1.
[17179594.088000] eth0: ADMtek Comet rev 17 at Port 0xec00, 00:00:E8:4B:25:38, IRQ 11.
[17179594.112000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179594.124000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179594.144000] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[17179594.144000] http://www.scyld.com/network/ne2k-pci.html
[17179594.144000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[17179594.148000] PCI: setting IRQ 5 as level-triggered
[17179594.148000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179594.148000] eth1: RealTek RTL-8029 found at 0xe000, IRQ 5, 00:E0:7D:73:3D:36.
[17179595.704000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.716000] agpgart: Detected VIA Apollo Pro 133 chipset
[17179595.720000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179596.296000] gameport: FM801 is pci0000:00:10.1/gameport0, io 0xdc00, speed 2485kHz
[17179596.352000] input: PC Speaker as /class/input/input0
[17179597.612000] FDC 0 is a post-1991 82077
[17179597.672000] parport: PnPBIOS parport detected.
[17179597.672000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179597.880000] usbcore: registered new driver hiddev
[17179597.916000] input: Chicony USB Wireless HID Receiver as /class/input/input1
[17179597.916000] input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:12.1-2
[17179598.224000] input: Chicony USB Wireless HID Receiver as /class/input/input2
[17179598.224000] input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:12.1-2
[17179598.252000] input: Chicony USB Wireless HID Receiver as /class/input/input3
[17179598.252000] input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:12.1-2
[17179598.252000] usbcore: registered new driver usbhid
[17179598.252000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179599.144000] nvidia: module license 'NVIDIA' taints kernel.
[17179599.252000] NET: Registered protocol family 10
[17179599.256000] lo: Disabled Privacy Extensions
[17179599.256000] IPv6 over IPv4 tunneling driver
[17179599.564000] Linux video capture interface: v1.00
[17179599.692000] ts: Compaq touchscreen protocol output
[17179599.988000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
[17179600.360000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179600.364000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[17179601.172000] lp0: using parport0 (interrupt-driven).
[17179601.300000] Adding 1534196k swap on /dev/disk/by-uuid/2d107c6b-e975-498e-a659-b643987dce7e. Priority:-1 extents:1 across:1534196k
[17179601.432000] EXT3 FS on hda1, internal journal
[17179602.072000] kjournald starting. Commit interval 5 seconds
[17179602.080000] EXT3 FS on hda4, internal journal
[17179602.080000] EXT3-fs: mounted filesystem with ordered data mode.
[17179604.868000] ACPI: Power Button (FF) [PWRF]
[17179604.868000] ACPI: Power Button (CM) [PWRB]
[17179605.196000] ibm_acpi: ec object not found
[17179605.268000] pcc_acpi: loading...
[17179610.084000] eth0: no IPv6 routers present
[17179610.404000] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
[17179610.404000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
[17179610.404000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
[17179613.156000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179613.156000] apm: overridden by ACPI.
[17179623.952000] ip_tables: (C) 2000-2006 Netfilter Core Team
[17179624.108000] Netfilter messages via NETLINK v0.30.
[17179624.128000] ip_conntrack version 2.4 (2047 buckets, 16376 max) - 224 bytes per conntrack
[17179641.084000] Bluetooth: Core ver 2.8
[17179641.084000] NET: Registered protocol family 31
[17179641.084000] Bluetooth: HCI device and connection manager initialized
[17179641.084000] Bluetooth: HCI socket layer initialized
[17179641.360000] Bluetooth: L2CAP ver 2.8
[17179641.360000] Bluetooth: L2CAP socket layer initialized
[17179641.412000] Bluetooth: RFCOMM socket layer initialized
[17179641.412000] Bluetooth: RFCOMM TTY layer initialized
[17179641.412000] Bluetooth: RFCOMM ver 1.7
[17179860.524000] eth0: no IPv6 routers present
[17182162.436000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17182162.576000] usb 1-2: not running at top speed; connect to a high speed hub
[17182162.604000] usb 1-2: configuration #1 chosen from 1 choice
[17182163.156000] usbcore: registered new driver libusual
[17182163.256000] SCSI subsystem initialized
[17182163.268000] Initializing USB Mass Storage driver...
[17182163.272000] scsi0 : SCSI emulation for USB Mass Storage devices
[17182163.272000] usbcore: registered new driver usb-storage
[17182163.272000] USB Mass Storage support registered.
[17182163.272000] usb-storage: device found at 2
[17182163.272000] usb-storage: waiting for device to settle before scanning
[17182168.272000] usb-storage: device scan complete
[17182168.280000] Vendor: SanDisk Model: Cruzer Mini Rev: 0.2
[17182168.280000] Type: Direct-Access ANSI SCSI revision: 02
[17182169.000000] SCSI device sda: 250879 512-byte hdwr sectors (128 MB)
[17182169.008000] sda: Write Protect is off
[17182169.012000] sda: Mode Sense: 03 00 00 00
[17182169.012000] sda: assuming drive cache: write through
[17182169.032000] SCSI device sda: 250879 512-byte hdwr sectors (128 MB)
[17182169.044000] sda: Write Protect is off
[17182169.044000] sda: Mode Sense: 03 00 00 00
[17182169.044000] sda: assuming drive cache: write through
[17182169.048000] sda: sda1
[17182169.068000] sd 0:0:0:0: Attached scsi removable disk sda
[17182169.188000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17182171.156000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17182198.232000] usb 1-2: USB disconnect, address 2
[17182205.620000] usb 4-2: new high speed USB device using ehci_hcd and address 3
[17182205.756000] usb 4-2: configuration #1 chosen from 1 choice
[17182205.768000] scsi1 : SCSI emulation for USB Mass Storage devices
[17182205.796000] usb-storage: device found at 3
[17182205.796000] usb-storage: waiting for device to settle before scanning
[17182210.796000] usb-storage: device scan complete
[17182210.812000] Vendor: SanDisk Model: Cruzer Mini Rev: 0.2
[17182210.812000] Type: Direct-Access ANSI SCSI revision: 02
[17182210.848000] SCSI device sda: 250879 512-byte hdwr sectors (128 MB)
[17182210.852000] sda: Write Protect is off
[17182210.852000] sda: Mode Sense: 03 00 00 00
[17182210.852000] sda: assuming drive cache: write through
[17182210.860000] SCSI device sda: 250879 512-byte hdwr sectors (128 MB)
[17182210.860000] sda: Write Protect is off
[17182210.860000] sda: Mode Sense: 03 00 00 00
[17182210.860000] sda: assuming drive cache: write through
[17182210.860000] sda: sda1
[17182210.868000] sd 1:0:0:0: Attached scsi removable disk sda
[17182210.868000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17182223.136000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!