Public feed
#381421
Linux version 2.6.19-gentoo-r5 (root@129_GOSIA) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 SMP Thu Mar 1 13:26:24 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
Entering add_active_range(0, 0, 98288) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 98288
HighMem 98288 -> 98288
early_node_map[1] active PFN ranges
0: 0 -> 98288
On node 0 totalpages: 98288
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 735 pages used for memmap
Normal zone: 93457 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.2 present.
ACPI: RSDP (v000 VIA692 ) @ 0x000f7270
ACPI: RSDT (v001 VIA692 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000
ACPI: FADT (v001 VIA692 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040
ACPI: DSDT (v001 VIA692 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
Detected 997.560 MHz processor.
Built 1 zonelists. Total pages: 97521
Kernel command line: init=/linuxrc ramdisk=8192 real_root=/dev/hda1 root=/dev/hda1 video=vesafb:1024x768-16@16
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0130a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c04f4000 soft=c04ec000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384772k/393152k available (2845k kernel code, 7864k reserved, 878k data, 248k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
lowmem : 0xc0000000 - 0xd7ff0000 ( 383 MB)
.init : 0xc04a9000 - 0xc04e7000 ( 248 kB)
.data : 0xc03c76c2 - 0xc04a30b4 ( 878 kB)
.text : 0xc0100000 - 0xc03c76c2 (2845 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1997.54 BogoMIPS (lpj=3995095)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0800 (from 0e20)
CPU0: Intel Pentium III (Coppermine) stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb050, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
PCI quirk: region 5000-500f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e4000000-e5ffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1173045002.484:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler deadline registered (default)
PCI: Disabling Via external APIC routing
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
vesafb: NVidia Corporation, NV17 () Board, Chip Rev A2 (OEM: NVidia)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:f880
vesafb: pmi: set display start = c00cf8c5, set palette = c00cf94a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: VBIOS/hardware supports DDC2 transfers
vesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
vesafb: framebuffer at 0xd0000000, mapped to 0xd8880000, using 3750k, total 65536k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
ip_conntrack version 2.4 (3071 buckets, 24568 max) - 228 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: ImPS/2 Generic Wheel Mouse as /class/input/input0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 248k freed
Failed to execute /linuxrc. Attempting defaults...
input: PC Speaker as /class/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:07.5 to 64
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Linux agpgart interface v0.101 (c) Dave Jones
parport_pc: VIA parallel port: io=0x378, irq=7
USB Universal Host Controller Interface driver v3.0
Linux video capture interface: v2.00
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:07.2, from 9 to 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA IRQ fixup for 0000:00:07.3, from 9 to 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd885a000, 00:0e:2e:56:a1:cc, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usb 1-1: new low speed USB device using uhci_hcd and address 2
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
saa7130[0]: found at 0000:00:0c.0, rev: 1, irq: 5, latency: 32, mmio: 0xe6001000
saa7134: <rant>
saa7134: Congratulations! Your TV card vendor saved a few
saa7134: cents for a eeprom, thus your pci board has no
saa7134: subsystem ID and I can't identify it automatically
saa7134: </rant>
saa7134: I feel better now. Ok, here are the good news:
saa7134: You can use the card=<nr> insmod option to specify
saa7134: which board do you have. The list:
saa7134: card=0 -> UNKNOWN/GENERIC
saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001
saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138
saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138
saa7134: card=4 -> EMPRESS 1131:6752
saa7134: card=5 -> SKNet Monster TV 1131:4e85
saa7134: card=6 -> Tevion MD 9717
saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01
saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142
saa7134: card=9 -> Medion 5044
saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI
saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143
saa7134: card=12 -> Medion 7134 16be:0003
saa7134: card=13 -> Typhoon TV+Radio 90031
saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b
saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a
saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840
saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133
saa7134: card=18 -> BMK MPEX No Tuner
saa7134: card=19 -> Compro VideoMate TV 185b:c100
saa7134: card=20 -> Matrox CronosPlus 102b:48d0
saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001
saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b
saa7134: card=23 -> BMK MPEX Tuner
saa7134: card=24 -> KNC One TV-Station DVR 1894:a006
saa7134: card=25 -> ASUS TV-FM 7133 1043:4843
saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b
saa7134: card=27 -> Manli MuchTV M-TV002/Behold TV 403 FM
saa7134: card=28 -> Manli MuchTV M-TV001/Behold TV 401
saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c
saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4
saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5
saa7134: card=32 -> AVACS SmartTV
saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff
saa7134: card=34 -> Noval Prime TV 7133
saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115
saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800
saa7134: card=37 -> Items MuchTV Plus / IT-005
saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152
saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212
saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100
saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100
saa7134: card=42 -> Sabrent SBT-TVFM (saa7130)
saa7134: card=43 -> :Zolid Xpert TV7134
saa7134: card=44 -> Empire PCI TV-Radio LE
saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715
saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee
saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162
saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158
saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200
saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d
saa7134: card=51 -> ProVideo PV952 1540:9524
saa7134: card=52 -> AverMedia AverTV/305 1461:2108
saa7134: card=53 -> ASUS TV-FM 7135 1043:4845
saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 1489:0214 5168:0304
saa7134: card=55 -> LifeView FlyDVB-T DUO 5168:0306
saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a
saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f
saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370
saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502
saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004
saa7134: card=62 -> Compro VideoMate TV Gold+II
saa7134: card=63 -> Kworld Xpert TV PVR7134
saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210
saa7134: card=65 -> V-Stream Studio TV Terminator
saa7134: card=66 -> Yuan TUN-900 (saa7135)
saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091
saa7134: card=68 -> GoTView 7135 PCI 5456:7135
saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004
saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900
saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901
saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350
saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330
saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212
saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044
saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9
saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e
saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862
saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO
saa7134: card=80 -> ASUS Digimatrix TV 1043:0210
saa7134: card=81 -> Philips Tiger reference design 1131:2018
saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231
saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160
saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319
saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05
saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301
saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421
saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201
saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c
saa7134: card=90 -> Kworld ATSC110 17de:7350
saa7134: card=91 -> AVerMedia A169 B 1461:7360
saa7134: card=92 -> AVerMedia A169 B1 1461:6360
saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005
saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus 5168:3306 5168:3502
saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138
saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008
saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300
saa7134: card=98 -> Proteus Pro 2309 0919:2003
saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00
saa7134: card=100 -> Asus Europa2 OEM 1043:4860
saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7130[0]: board init: gpio is 804000
usb 1-1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
saa7130[0]: Huh, no eeprom present (err=-5)?
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
usbcore: registered new interface driver hiddev
input: USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:07.2-1
input: USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:07.2-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k
Real Time Clock Driver v1.12ac
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7130[0]: found at 0000:00:0c.0, rev: 1, irq: 5, latency: 32, mmio: 0xe6001000
saa7130[0]: subsystem: 1131:0000, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,insmod option]
saa7130[0]: board init: gpio is 804000
saa7130[0]: Huh, no eeprom present (err=-5)?
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (saa7130[0])
tuner 1-0060: type set to 40 (HITACHI V7-J180AT)
tuner 1-0060: type set to 40 (HITACHI V7-J180AT)
tuner 1-0061: chip found @ 0xc2 (saa7130[0])
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0