Someone

NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
hdb: ST3250624A, ATA DISK drive
hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hda: set_drive_speed_status: error=0x04 { AbortedCommand }
ide0: Drive 0 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST380013A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdb: max request size: 512KiB
hdb: 488397168 sectors (250059 MB) w/16384KiB Cache, CHS=30401/255/63, UDMA(33)
hdb: cache flushes supported
 hdb: hdb1 hdb2
hdc: max request size: 512KiB
hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
hdc: cache flushes supported
 hdc: hdc1
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-4 Jun  2 2006 03:27:01)
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsEmulex LightPulse Fibre Channel SCSI driver 8.1.1
Copyright(c) 2004-2005 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.005.
nsp32: loading...
libata version 1.20 loaded.
Driver 'sd' needs updating - please use bus_type methods
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
Fusion MPT FC Host driver 3.03.07
Fusion MPT SAS Host driver 3.03.07
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3752.000 MB/sec
raid5: using function: pIII_sse (3752.000 MB/sec)
raid6: int32x1    582 MB/s
raid6: int32x2    660 MB/s
raid6: int32x4    558 MB/s
raid6: int32x8    464 MB/s
raid6: mmxx1     1296 MB/s
raid6: mmxx2     2175 MB/s
raid6: sse1x1    1144 MB/s
raid6: sse1x2    1890 MB/s
raid6: using algorithm sse1x2 (1890 MB/s)
md: raid6 personality registered for level 6
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 62
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 11, io mem 0xec004000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 3, io mem 0xec002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 11, io mem 0xec003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
ReiserFS: dm-0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on dm-0
<4>reiser4[mount(2541)]: init_read_super (fs/reiser4/init_super.c:604)[nikita-2608]:
WARNING: dm-0: wrong master super block magic
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
Adding 786424k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:786424k
EXT3 FS on dm-0, internal journal
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Intel ISA PCIC probe: not found.
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
pnp: Device 00:0a disabled.
floppy0: no floppy controllers found
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01509:927a bound to 0000:00:04.0
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
eth0: no link during initialization.
eth0: no link during initialization.
intel8x0_measure_ac97_clock: measured 50272 usecs
intel8x0: clocking to 47470
eth0: link up.
input: PC Speaker as /class/input/input2
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
fbsplash: console 1 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'vlos-1.2'
fbsplash: switched splash state to 'on' on console 10
NTFS driver 2.1.26 [Flags: R/O MODULE].