Public feed
#376390
[ 0.000000] Linux version 2.6.20-8-generic (root@yellow) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 01:14:41 UTC 2007 (Ubuntu 2.6.20-8.14-generic)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz -- vga=0x31a
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe8ac00 (usable)
[ 0.000000] BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe8ec00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523914) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x00000000000fec30
[ 0.000000] ACPI: RSDT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcb3b
[ 0.000000] ACPI: FADT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcb9f
[ 0.000000] ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000fffdc57e
[ 0.000000] ACPI: MADT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcc13
[ 0.000000] ACPI: BOOT (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fccbd
[ 0.000000] ACPI: ASF! (v016 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcce5
[ 0.000000] ACPI: MCFG (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcd4c
[ 0.000000] ACPI: HPET (v001 DELL WS 670 0x00000007 ASL 0x00000061) @ 0x00000000000fcd8a
[ 0.000000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x0000000000000000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe8a000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523914) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe8a000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 523914
[ 0.000000] On node 0 totalpages: 523818
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1074 pages reserved
[ 0.000000] DMA zone: 2870 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7106 pages used for memmap
[ 0.000000] DMA32 zone: 512712 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Intel E7520/7320/7525 detected.<6>ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[ 0.000000] Processor #6
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
[ 0.000000] Processor #7
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 10, address 0xfec80800, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515582
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz -- vga=0x31a
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 450.381193] Console: colour dummy device 80x25
[ 450.382409] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 450.384226] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 450.384466] Checking aperture...
[ 450.384487] Calgary: detecting Calgary via BIOS EBDA area
[ 450.384490] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 450.403508] Memory: 2051936k/2095656k available (2196k kernel code, 43336k reserved, 1138k data, 300k init)
[ 450.479688] Calibrating delay using timer specific routine.. 5990.85 BogoMIPS (lpj=11981703)
[ 450.479757] Security Framework v1.0.0 initialized
[ 450.479765] SELinux: Disabled at boot.
[ 450.479797] Mount-cache hash table entries: 256
[ 450.479973] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 450.479978] CPU: L2 cache: 1024K
[ 450.479982] CPU 0/0 -> Node 0
[ 450.479985] using mwait in idle threads.
[ 450.479988] CPU: Physical Processor ID: 0
[ 450.479991] CPU: Processor Core ID: 0
[ 450.480002] CPU0: Thermal monitoring enabled (TM1)
[ 450.480018] SMP alternatives: switching to UP code
[ 450.480259] ACPI: Core revision 20060707
[ 450.556648] Using local APIC timer interrupts.
[ 450.590051] result 12468691
[ 450.590054] Detected 12.468 MHz APIC timer.
[ 450.591887] SMP alternatives: switching to SMP code
[ 450.591971] Booting processor 1/4 APIC 0x6
[ 450.602361] Initializing CPU#1
[ 450.679573] Calibrating delay using timer specific routine.. 5985.32 BogoMIPS (lpj=11970652)
[ 450.679585] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 450.679587] CPU: L2 cache: 1024K
[ 450.679589] CPU 1/6 -> Node 0
[ 450.679592] CPU: Physical Processor ID: 3
[ 450.679593] CPU: Processor Core ID: 0
[ 450.679603] CPU1: Thermal monitoring enabled (TM1)
[ 450.679815] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
[ 450.683809] SMP alternatives: switching to SMP code
[ 450.683857] Booting processor 2/4 APIC 0x1
[ 450.694257] Initializing CPU#2
[ 450.771523] Calibrating delay using timer specific routine.. 5985.18 BogoMIPS (lpj=11970365)
[ 450.771536] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 450.771539] CPU: L2 cache: 1024K
[ 450.771542] CPU 2/1 -> Node 0
[ 450.771545] CPU: Physical Processor ID: 0
[ 450.771547] CPU: Processor Core ID: 0
[ 450.771559] CPU2: Thermal monitoring enabled (TM1)
[ 450.771778] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
[ 450.775787] SMP alternatives: switching to SMP code
[ 450.775923] Booting processor 3/4 APIC 0x7
[ 450.786312] Initializing CPU#3
[ 450.863473] Calibrating delay using timer specific routine.. 5985.19 BogoMIPS (lpj=11970384)
[ 450.863484] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 450.863486] CPU: L2 cache: 1024K
[ 450.863488] CPU 3/7 -> Node 0
[ 450.863491] CPU: Physical Processor ID: 3
[ 450.863492] CPU: Processor Core ID: 0
[ 450.863502] CPU3: Thermal monitoring enabled (TM1)
[ 450.863716] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
[ 450.867485] Brought up 4 CPUs
[ 450.867538] testing NMI watchdog ... OK.
[ 450.907570] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[ 450.907574] time.c: Detected 2992.500 MHz processor.
[ 451.082904] migration_cost=5,911
[ 451.083327] NET: Registered protocol family 16
[ 451.083446] ACPI: bus type pci registered
[ 451.086590] PCI: Using MMCONFIG at e0000000
[ 451.122050] ACPI: Interpreter enabled
[ 451.122058] ACPI: Using IOAPIC for interrupt routing
[ 451.125370] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 451.125380] PCI: Probing PCI hardware (bus 00)
[ 451.125402] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 451.128886] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 451.128892] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 451.129062] PCI: PXH quirk detected, disabling MSI for SHPC device
[ 451.129090] PCI: PXH quirk detected, disabling MSI for SHPC device
[ 451.129440] Boot video device is 0000:05:00.0
[ 451.129562] PCI: Transparent bridge - 0000:00:1e.0
[ 451.129606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 451.727823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 451.735612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
[ 451.743362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
[ 451.751174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 451.756834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 451.762491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
[ 451.802880] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 451.803632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 451.804367] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 451.805104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 451.805857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 451.806613] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 451.807376] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 451.808113] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 451.808293] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 451.808311] pnp: PnP ACPI init
[ 451.841090] pnp: PnP ACPI: found 10 devices
[ 451.841161] PCI: Using ACPI for IRQ routing
[ 451.841166] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 451.841264] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 451.841272] hpet0: 3 64-bit timers, 14318180 Hz
[ 451.842288] PCI-GART: No AMD northbridge found.
[ 451.844762] pnp: 00:01: ioport range 0x800-0x85f could not be reserved
[ 451.844767] pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
[ 451.844772] pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
[ 451.845135] PCI: Bridge: 0000:01:00.0
[ 451.845139] IO window: disabled.
[ 451.845143] MEM window: disabled.
[ 451.845147] PREFETCH window: disabled.
[ 451.845151] PCI: Bridge: 0000:01:00.2
[ 451.845154] IO window: d000-dfff
[ 451.845159] MEM window: dfe00000-dfefffff
[ 451.845163] PREFETCH window: disabled.
[ 451.845167] PCI: Bridge: 0000:00:02.0
[ 451.845170] IO window: d000-dfff
[ 451.845175] MEM window: dfe00000-dfefffff
[ 451.845178] PREFETCH window: disabled.
[ 451.845182] PCI: Bridge: 0000:00:03.0
[ 451.845184] IO window: disabled.
[ 451.845189] MEM window: dfd00000-dfdfffff
[ 451.845192] PREFETCH window: disabled.
[ 451.845196] PCI: Bridge: 0000:00:04.0
[ 451.845198] IO window: disabled.
[ 451.845203] MEM window: dd000000-dfcfffff
[ 451.845207] PREFETCH window: c0000000-cfffffff
[ 451.845211] PCI: Bridge: 0000:00:1e.0
[ 451.845213] IO window: disabled.
[ 451.845218] MEM window: dcf00000-dcffffff
[ 451.845222] PREFETCH window: disabled.
[ 451.845238] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 451.845246] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 451.845256] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 451.845266] PCI: Setting latency timer of device 0000:01:00.2 to 64
[ 451.845272] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 451.845278] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 451.845285] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 451.845291] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 451.845297] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 451.845357] NET: Registered protocol family 2
[ 451.882964] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 451.883295] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 451.885607] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 451.886220] TCP: Hash tables configured (established 262144 bind 65536)
[ 451.886228] TCP reno registered
[ 451.899103] checking if image is initramfs... it is
[ 452.480215] Freeing initrd memory: 6935k freed
[ 452.484847] Simple Boot Flag at 0x7a set to 0x1
[ 452.485393] audit: initializing netlink socket (disabled)
[ 452.485409] audit(1172674682.080:1): initialized
[ 452.485661] VFS: Disk quotas dquot_6.5.1
[ 452.485687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 452.485752] io scheduler noop registered
[ 452.485757] io scheduler anticipatory registered
[ 452.485760] io scheduler deadline registered
[ 452.485782] io scheduler cfq registered (default)
[ 452.502738] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 452.502756] Allocate Port Service[0000:00:02.0:pcie00]
[ 452.502800] Allocate Port Service[0000:00:02.0:pcie01]
[ 452.502881] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 452.502899] Allocate Port Service[0000:00:03.0:pcie00]
[ 452.502942] Allocate Port Service[0000:00:03.0:pcie01]
[ 452.503019] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 452.503038] Allocate Port Service[0000:00:04.0:pcie00]
[ 452.503077] Allocate Port Service[0000:00:04.0:pcie01]
[ 452.503234] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503240] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503242] aer_init: AER service init fails - Run ACPI _OSC fails
[ 452.503246] aer: probe of 0000:00:02.0:pcie01 failed with error 2
[ 452.503264] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503269] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503271] aer_init: AER service init fails - Run ACPI _OSC fails
[ 452.503274] aer: probe of 0000:00:03.0:pcie01 failed with error 2
[ 452.503291] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503295] Evaluate _OSC Set fails. Status = 0x0005
[ 452.503297] aer_init: AER service init fails - Run ACPI _OSC fails
[ 452.503300] aer: probe of 0000:00:04.0:pcie01 failed with error 2
[ 452.533529] Real Time Clock Driver v1.12ac
[ 452.533592] Linux agpgart interface v0.101 (c) Dave Jones
[ 452.533597] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 452.533719] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 452.533865] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 452.534474] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 452.534757] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 452.534974] mice: PS/2 mouse device common for all mice
[ 452.535722] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 452.535839] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 452.535845] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 452.536162] PNP: No PS/2 controller found. Probing ports directly.
[ 452.538637] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 452.538644] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 452.538788] TCP cubic registered
[ 452.538802] NET: Registered protocol family 1
[ 452.538810] NET: Registered protocol family 8
[ 452.538813] NET: Registered protocol family 20
[ 452.538974] ACPI: (supports S0 S1 S3 S4 S5)
[ 452.539023] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 452.539084] Freeing unused kernel memory: 300k freed
[ 452.635711] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 5120k, total 131072k
[ 452.635723] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[ 452.635726] vesafb: scrolling: redraw
[ 452.635730] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 452.685951] Console: switching to colour frame buffer device 160x64
[ 452.736343] fb0: VESA VGA frame buffer device
[ 452.876792] Capability LSM initialized
[ 452.913998] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 452.914594] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 452.915169] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 452.915741] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 453.431501] usbcore: registered new interface driver usbfs
[ 453.431939] usbcore: registered new interface driver hub
[ 453.452921] usbcore: registered new device driver usb
[ 453.460788] ieee1394: Initialized config rom entry `ip1394'
[ 453.464136] ACPI: PCI Interrupt 0000:06:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 453.515485] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dcffb800-dcffbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 453.517964] ICH5: IDE controller at PCI slot 0000:00:1f.1
[ 453.518532] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 453.519052] ICH5: chipset revision 2
[ 453.519300] ICH5: not 100% native mode: will probe irqs later
[ 453.519768] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA<6>Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 453.520083] Copyright (c) 1999-2006 Intel Corporation.
[ 453.520950]
[ 453.521072] Probing IDE interface ide1...
[ 453.530107] USB Universal Host Controller Interface driver v3.0
[ 454.261675] hdc: JLMS DVD-ROM XJ-HD166, ATAPI CD/DVD-ROM drive
[ 454.713414] hdd: _NEC DVD+RW ND-3100AD, ATAPI CD/DVD-ROM drive
[ 454.773453] ide1 at 0x170-0x177,0x376 on irq 15
[ 454.773814] ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
[ 454.774186] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 454.774622] ICH5-SATA: chipset revision 2
[ 454.774851] ICH5-SATA: 100% native mode on irq 18
[ 454.775122] ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio
[ 454.775560] ide2: BM-DMA at 0xfea8-0xfeaf, BIOS settings: hde:DMA, hdf:pio
[ 454.775995] Probing IDE interface ide0...
[ 454.789409] ieee1394: Host added: ID:BUS[0-00:1023] GUID[8083000f41121f00]
[ 455.065228] hda: ST3160023AS, ATA DISK drive
[ 455.404878] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 455.576780] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 455.749252] ide0 at 0xfe00-0xfe07,0xfe12 on irq 18
[ 455.749587] Probing IDE interface ide2...
[ 456.040669] hde: ST3160023AS, ATA DISK drive
[ 456.380320] hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 456.560217] hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 456.740687] ide2 at 0xfe20-0xfe27,0xfe32 on irq 18
[ 456.751938] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 456.764374] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 456.764383] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 456.776555] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 456.776643] SCSI subsystem initialized
[ 456.801443] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 456.814910] libata version 2.00 loaded.
[ 456.815185] usb usb1: configuration #1 chosen from 1 choice
[ 456.828841] hub 1-0:1.0: USB hub found
[ 456.842040] hub 1-0:1.0: 2 ports detected
[ 456.960157] ACPI: PCI Interrupt 0000:03:0e.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 456.960175] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 456.960180] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 456.960213] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 456.960242] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 456.960384] usb usb2: configuration #1 chosen from 1 choice
[ 456.960429] hub 2-0:1.0: USB hub found
[ 456.960440] hub 2-0:1.0: 2 ports detected
[ 457.062322] GSI 48 (level, low) -> IRQ 48
[ 457.068108] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 457.068124] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 457.068129] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 457.068163] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 457.068189] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 457.068329] usb usb3: configuration #1 chosen from 1 choice
[ 457.068369] hub 3-0:1.0: USB hub found
[ 457.068381] hub 3-0:1.0: 2 ports detected
[ 457.176001] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 457.176014] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 457.176022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 457.176056] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 457.176082] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[ 457.176220] usb usb4: configuration #1 chosen from 1 choice
[ 457.176259] hub 4-0:1.0: USB hub found
[ 457.176269] hub 4-0:1.0: 2 ports detected
[ 457.199856] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 457.387408] usb 1-1: configuration #1 chosen from 1 choice
[ 457.593848] e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0f:1f:83:41:12
[ 457.652576] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 457.667579] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 457.686569] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 457.706820] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 457.706826] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 457.724445] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 457.743479] ehci_hcd 0000:00:1d.7: debug port 1
[ 457.760217] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 457.760293] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
[ 457.782528] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 457.799145] usb usb5: configuration #1 chosen from 1 choice
[ 457.815790] hub 5-0:1.0: USB hub found
[ 457.831837] hub 5-0:1.0: 8 ports detected
[ 457.965759] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 457.983497] Uniform CD-ROM driver Revision: 3.20
[ 458.005198] hdd: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 458.022409] hda: max request size: 512KiB
[ 458.040366] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 458.057948] hda: cache flushes supported
[ 458.074164] hda: hda1 hda2 hda3 < hda5 >
[ 458.122468] hde: max request size: 512KiB
[ 458.138997] hde: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 458.155670] hde: cache flushes supported
[ 458.171731] hde: hde1 hde2 < hde5 >
[ 458.221325] usb 1-2: device not accepting address 3, error -71
[ 458.299272] usb 1-1: USB disconnect, address 2
[ 458.447208] usbcore: registered new interface driver hiddev
[ 458.559171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 458.577012] ISO 9660 Extensions: RRIP_1991A
[ 458.607996] Registering unionfs 20060916-2203
[ 458.624739] unionfs: debugging is not enabled
[ 458.657439] loop: loaded (max 8 devices)
[ 458.815010] usbcore: registered new interface driver usbhid
[ 458.831822] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 458.953132] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 459.054793] usb 1-1: new low speed USB device using uhci_hcd and address 5
[ 459.258249] usb 1-1: configuration #1 chosen from 1 choice
[ 459.303635] input: BTC USB Multimedia Keyboard as /class/input/input0
[ 459.322567] input: USB HID v1.00 Keyboard [BTC USB Multimedia Keyboard ] on usb-0000:00:1d.0-1
[ 459.405086] input: BTC USB Multimedia Keyboard as /class/input/input1
[ 459.423451] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Keyboard ] on usb-0000:00:1d.0-1
[ 459.459072] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 459.476253]
[ 459.476254] Call Trace:
[ 459.509072] <IRQ> [<ffffffff802bcc65>] __report_bad_irq+0x35/0x90
[ 459.525603] [<ffffffff802bcee0>] note_interrupt+0x220/0x280
[ 459.542165] [<ffffffff880443f5>] :usbcore:usb_hcd_irq+0x25/0x60
[ 459.558683] [<ffffffff802bd972>] handle_fasteoi_irq+0xb2/0xf0
[ 459.575183] [<ffffffff8026223c>] call_softirq+0x1c/0x28
[ 459.591736] [<ffffffff8027017a>] do_IRQ+0x8a/0xf0
[ 459.608254] [<ffffffff8025a1a0>] mwait_idle+0x0/0x50
[ 459.624618] [<ffffffff80261631>] ret_from_intr+0x0/0xa
[ 459.640824] <EOI> [<ffffffff8025a1e2>] mwait_idle+0x42/0x50
[ 459.657109] [<ffffffff8024b2db>] cpu_idle+0x9b/0xd0
[ 459.673385] [<ffffffff805647c5>] start_kernel+0x245/0x250
[ 459.689626] [<ffffffff80564163>] _sinittext+0x163/0x170
[ 459.705801]
[ 459.721909] handlers:
[ 459.737814] [<ffffffff8020d210>] (ide_intr+0x0/0x220)
[ 459.753802] [<ffffffff8020d210>] (ide_intr+0x0/0x220)
[ 459.769607] [<ffffffff880443d0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 459.785467] Disabling IRQ #18
[ 459.801177] Losing some ticks... checking if CPU frequency changed.
[ 460.010238] usb 1-2: new low speed USB device using uhci_hcd and address 6
[ 460.183406] usb 1-2: configuration #1 chosen from 1 choice
[ 460.215381] input: HID 413c:3010 as /class/input/input2
[ 460.231968] input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.0-2
[ 521.459084] hda: lost interrupt
[ 521.475103] hde: lost interrupt
[ 541.495615] hde: dma_timer_expiry: dma status == 0x24
[ 541.511516] hda: dma_timer_expiry: dma status == 0x24
[ 551.489896] hde: DMA interrupt recovery
[ 551.505228] hde: lost interrupt
[ 551.521881] hda: DMA interrupt recovery
[ 551.537048] hda: lost interrupt
[ 571.510441] hde: dma_timer_expiry: dma status == 0x24
[ 571.538428] hda: dma_timer_expiry: dma status == 0x24
[ 581.504723] hde: DMA interrupt recovery
[ 581.519484] hde: lost interrupt
[ 581.544702] hda: DMA interrupt recovery
[ 581.559384] hda: lost interrupt
[ 601.521271] hde: dma_timer_expiry: dma status == 0x24
[ 601.561251] hda: dma_timer_expiry: dma status == 0x24
[ 611.515553] hde: DMA interrupt recovery
[ 611.529549] hde: lost interrupt
[ 611.567525] hda: DMA interrupt recovery
[ 611.581258] hda: lost interrupt
[ 631.532101] hde: dma_timer_expiry: dma status == 0x24
[ 631.584074] hda: dma_timer_expiry: dma status == 0x24
[ 641.526383] hde: DMA interrupt recovery
[ 641.539611] hde: lost interrupt
[ 641.594346] hda: DMA interrupt recovery
[ 641.607383] hda: lost interrupt
[ 661.542931] hde: dma_timer_expiry: dma status == 0x24
[ 661.610895] hda: dma_timer_expiry: dma status == 0x24
[ 671.537215] hde: DMA interrupt recovery
[ 671.550039] hde: lost interrupt
[ 671.617172] hda: DMA interrupt recovery
[ 671.629743] hda: lost interrupt
[ 691.537775] hde: dma_timer_expiry: dma status == 0x24
[ 691.629728] hda: dma_timer_expiry: dma status == 0x24
[ 698.198350] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
[ 699.032030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 699.362262] input: PC Speaker as /class/input/input3
[ 699.478122] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 699.523933] EDAC MC: Ver: 2.0.1 Feb 13 2007
[ 699.630505] iTCO_vendor_support: vendor-support=0
[ 699.767765] Floppy drive(s): fd0 is 1.44M
[ 699.799226] FDC 0 is a post-1991 82077
[ 699.938847] EDAC e752x: tolm = 80000, remapbase = ffc000, remaplimit = 0
[ 699.954255] EDAC MC0: Giving out device to e752x_edac E7525: DEV 0000:00:00.0
[ 700.093910] parport: PnPBIOS parport detected.
[ 700.108333] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 700.135685] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 700.149420] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 700.163195] iTCO_wdt: No card detected
[ 700.333118] intel_rng: FWH not detected
[ 700.435342] NET: Registered protocol family 17
[ 700.772049] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 700.787792] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 701.104306] intel8x0_measure_ac97_clock: measured 54337 usecs
[ 701.117846] intel8x0: clocking to 48000
[ 701.532066] hde: DMA interrupt recovery
[ 701.546232] hde: lost interrupt
[ 701.636010] hda: DMA interrupt recovery
[ 701.650377] hda: lost interrupt
[ 704.098860] NET: Registered protocol family 10
[ 704.113402] lo: Disabled Privacy Extensions
[ 714.280764] eth0: no IPv6 routers present
[ 721.548602] hde: dma_timer_expiry: dma status == 0x24
[ 721.652546] hda: dma_timer_expiry: dma status == 0x24
[ 731.542885] hde: DMA interrupt recovery
[ 731.556621] hde: lost interrupt
[ 731.658820] hda: DMA interrupt recovery
[ 731.672474] hda: lost interrupt
[ 751.559432] hde: dma_timer_expiry: dma status == 0x24
[ 751.675368] hda: dma_timer_expiry: dma status == 0x24
[ 761.553712] hde: DMA interrupt recovery
[ 761.567454] hde: lost interrupt
[ 761.681642] hda: DMA interrupt recovery
[ 761.695341] hda: lost interrupt
[ 781.570261] hde: dma_timer_expiry: dma status == 0x24
[ 781.686197] hda: dma_timer_expiry: dma status == 0x24
[ 791.564542] hde: DMA interrupt recovery
[ 791.578292] hde: lost interrupt
[ 791.696469] hda: DMA interrupt recovery
[ 791.710174] hda: lost interrupt
[ 811.581091] hde: dma_timer_expiry: dma status == 0x24
[ 811.713018] hda: dma_timer_expiry: dma status == 0x24
[ 821.575373] hde: DMA interrupt recovery
[ 821.589128] hde: lost interrupt
[ 821.723290] hda: DMA interrupt recovery
[ 821.737003] hda: lost interrupt
[ 841.591922] hde: dma_timer_expiry: dma status == 0x24
[ 841.739838] hda: dma_timer_expiry: dma status == 0x24
[ 851.586203] hde: DMA interrupt recovery
[ 851.599831] hde: lost interrupt
[ 851.746114] hda: DMA interrupt recovery
[ 851.759692] hda: lost interrupt
[ 871.602752] hde: dma_timer_expiry: dma status == 0x24
[ 871.762662] hda: dma_timer_expiry: dma status == 0x24
[ 881.597036] hde: DMA interrupt recovery
[ 881.610351] hde: lost interrupt
[ 881.768940] hda: DMA interrupt recovery
[ 881.781833] hda: lost interrupt
[ 895.736346] fuse init (API version 7.8)
[ 901.609589] hde: dma_timer_expiry: dma status == 0x24
[ 901.781491] hda: dma_timer_expiry: dma status == 0x24