11 - Create lts.conf file
R - Return to previous menu
Q - Quit
Make a selection: 7
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
Xdmcp is the protocol used by a display manager to present
a login dialog box on the workstation.
Do you want to enable xdm (y/n) ? y
Normally, when a display manager is running, it will launch an X server on
the console screen, giving you a graphical login on the console as well as
on the workstations. Some people prefer to keep their server in character
mode.
Do you want to disable the graphical login on the server (y/n) [N]? n
Configuring Xdm
Updating: /etc/X11/xdm/xdm-config
Updating: /usr/X11R6/lib/X11/xdm/Xaccess
Press <enter> to continue..
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
1 - Runlevel
2 - Interface selection
3 - DHCP configuration
4 - TFTP configuration
5 - Portmapper configuration
6 - NFS configuration
7 - XDMCP configuration
8 - Create /etc/hosts entries
9 - Create /etc/hosts.allow entries
10 - Create /etc/exports entries
11 - Create lts.conf file
R - Return to previous menu
Q - Quit
Make a selection: r
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: s
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
Interface IP Address Netmask Network Broadcast Used
eth0 192.168.0.1 255.255.255.0 192.168.0.0 192.168.0.255 <-----
eth1 172.16.1.217 255.255.0.0 172.16.0.0 172.16.255.255
Service Installed Enabled Running Notes
dhcpd Yes Yes Yes Version 2
tftpd Yes Yes Yes Has '-s' flag
portmapper Yes Yes Yes
nfs Yes Yes Yes
xdmcp Yes no no xdm, kdm Using: xdm
File Configured Notes
/etc/hosts Yes
/etc/hosts.allow Yes
/etc/exports Yes
/opt/ltsp/i386/etc/lts.conf Yes
Configured runlevel: 4 (value of initdefault in /etc/inittab)
Current runlevel: 4 (output of the 'runlevel' command)
Installation dir...: /opt/ltsp
Press <enter> to return to the main menu...
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
eth0 192.168.0.1 255.255.255.0 192.168.0.0 192.168.0.255 <-----
Make a selection: Invalid Answer!
eth1 172.16.1.217 255.255.0.0 172.16.0.0 172.16.255.255
Service Installed Enabled Running Notes
dhcpd Yes Yes Yes Version 2
tftpd Yes Yes Yes Has '-s' flag
portmapper Yes Yes Yes
nfs Yes Yes Yes
xdmcp Yes no no xdm, kdm Using: xdm
File Configured Notes
/etc/hosts Yes
/etc/hosts.allow Yes
/etc/exports Yes
/opt/ltsp/i386/etc/lts.conf Yes
Configured runlevel: 4 (value of initdefault in /etc/inittab)
Current runlevel: 4 (output of the 'runlevel' command)
Installation dir...: /opt/ltsp
Press <enter> to return to the main menu...
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection:
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
s
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
s
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
s
s
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: Invalid Answer!
admin:~# ltspcfg
ltspcfg - Version 0.16
Checking Runlevel....: 4
Checking Ethernet Interfaces
Checking Dhcpd.......
Checking Tftpd.......
Checking Portmapper...
Checking nfs....
Checking xdmcp............Found: xdm, kdm Using: xdm
Checking /etc/hosts.
Checking /etc/hosts.allow.
Checking /etc/exports.
Checking lts.conf.
Press <enter> to continue..
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
S - Show the status of all services
C - Configure the services manually
Q - Quit
Make a selection: s
ltspcfg v0.16 The Linux Terminal Server Project (http://www.LTSP.org)
Interface IP Address Netmask Network Broadcast Used
eth0 192.168.0.1 255.255.255.0 192.168.0.0 192.168.0.255 <-----
eth1 172.16.1.217 255.255.0.0 172.16.0.0 172.16.255.255
Service Installed Enabled Running Notes
dhcpd Yes Yes Yes Version 2
tftpd Yes Yes Yes Has '-s' flag
portmapper Yes Yes Yes
nfs Yes Yes Yes
xdmcp Yes no no xdm, kdm Using: xdm
File Configured Notes
/etc/hosts Yes
/etc/hosts.allow Yes
/etc/exports Yes
/opt/ltsp/i386/etc/lts.conf Yes
Configured runlevel: 4 (value of initdefault in /etc/inittab)
Current runlevel: 4 (output of the 'runlevel' command)
Installation dir...: /opt/ltsp
Press <enter> to return to the main menu...