motion
[0] Processing thread 0 - config file /usr/local/etc/motion.conf
[0] Motion running in setup mode.
[0] Thread 1 is from /usr/local/etc/motion.conf
[0] Thread 1 is device: /dev/video0 input 8
[0] Waiting for threads to finish, pid: 15605
[1] Thread started
[0] motion-httpd/3.2.8 running, accepting connections
[0] motion-httpd: waiting for data on port TCP 8080
[1] cap.driver: "uvcvideo"
[1] cap.card: "USB Video Class device"
[1] cap.bus_info: "0000:02:00.2"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] v4l2_select_input: name = "Camera", type 0x00000002, status 00000000
[1] - CAMERA
[1] Device doesn't support VIDIOC_G_STD
[1] Supported palettes:
[1] 0: MJPG (MJPEG)
[1] 1: YUYV (Uncompressed)
[1] Test palette YUYV (960x720)
[1] Adjusting resolution from 960x720 to 1024x576.
[1] Using palette YUYV (1024x576) bytesperlines 2048 sizeimage 1179648 colorspace 00000008
[1] found control 0x00980900, "Brightness", range 0,255
[1] "Brightness", default 127, current 79
[1] found control 0x00980901, "Contrast", range 0,255
[1] "Contrast", default 32, current 32
[1] found control 0x00980902, "Saturation", range 0,255
[1] "Saturation", default 39, current 39
[1] found control 0x00980910, "Gamma", range 100,220
[1] "Gamma", default 220, current 220
[1] found control 0x00980913, "Gain", range 0,255
[1] "Gain", default 0, current 16
[1] found control 0x08000000, "Backlight Compensation", range 0,2
[1] "Backlight Compensation", default 1, current 1
[1] found control 0x08000001, "Power Line Frequency", range 0,2
[1] "Power Line Frequency", default 2, current 2
[1] mmap information:
[1] frames=4
[1] 0 length=1179648
[1] 1 length=1179648
[1] 2 length=1179648
[1] 3 length=1179648
[1] Using V4L2
[1] Started stream webcam server in port 8081
[1] Raw changes: 0 - changes after 'EedDl': 0 - labels: 0 - noise level: 22
[1] setting control "Brightness" to 25 (ret 0 )
[1] Raw changes: 0 - changes after 'EedDl': 0 - labels: 0 - noise level: 17
[1] setting control "Brightness" to 51 (ret 0 )
[1] Raw changes: 0 - changes after 'EedDl': 0 - labels: 0 - noise level: 17
[1] setting control "Brightness" to 77 (ret 0 )