rendered paste body[17179569.184000] Linux version 2.6.15-28-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Feb 1 16:14:07 UTC 2007
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001aef8000 (usable)
[17179569.184000] BIOS-e820: 000000001aef8000 - 000000001af9a000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001af9a000 - 000000001bd91000 (usable)
[17179569.184000] BIOS-e820: 000000001bd91000 - 000000001bd99000 (reserved)
[17179569.184000] BIOS-e820: 000000001bd99000 - 000000001be2e000 (usable)
[17179569.184000] BIOS-e820: 000000001be2e000 - 000000001be32000 (reserved)
[17179569.184000] BIOS-e820: 000000001be32000 - 000000001beab000 (usable)
[17179569.184000] BIOS-e820: 000000001beab000 - 000000001beef000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001beef000 - 000000001bef2000 (usable)
[17179569.184000] BIOS-e820: 000000001bef2000 - 000000001beff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001beff000 - 000000001bf00000 (usable)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 447MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fe860
[17179569.184000] On node 0 totalpages: 114432
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 110336 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.4 present.
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: RSDP (v000 GATEWA ) @ 0x000fe020
[17179569.184000] ACPI: RSDT (v001 GATEWA 06DT04B 0x000007da 0x01000013) @ 0x1befe038
[17179569.184000] ACPI: FADT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1befd000
[17179569.184000] ACPI: MADT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef8000
[17179569.184000] ACPI: MCFG (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef7000
[17179569.184000] ACPI: SSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef6000
[17179569.184000] ACPI: SSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef5000
[17179569.184000] ACPI: SSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef4000
[17179569.184000] ACPI: SSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef3000
[17179569.184000] ACPI: SSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x1bef2000
[17179569.184000] ACPI: DSDT (v001 GATEWA 06DT04B 0x000007da MSFT 0x01000013) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 1bf00000:e4080000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash elevator=cfq
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 3000.961 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.932000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.932000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[17179570.944000] Memory: 440936k/457728k available (2115k kernel code, 15000k reserved, 594k data, 332k init, 0k highmem)
[17179570.944000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.024000] Calibrating delay using timer specific routine.. 6011.11 BogoMIPS (lpj=12022232)
[17179571.024000] Security Framework v1.0.0 initialized
[17179571.024000] SELinux: Disabled at boot.
[17179571.024000] Mount-cache hash table entries: 512
[17179571.024000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[17179571.024000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[17179571.024000] monitor/mwait feature present.
[17179571.024000] using mwait in idle threads.
[17179571.024000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.024000] CPU: L2 cache: 2048K
[17179571.024000] CPU: Hyper-Threading is disabled
[17179571.024000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000001
[17179571.024000] mtrr: v2.0 (20020519)
[17179571.024000] Enabling fast FPU save and restore... done.
[17179571.024000] Enabling unmasked SIMD FPU exception support... done.
[17179571.024000] Checking 'hlt' instruction... OK.
[17179571.040000] SMP alternatives: switching to UP code
[17179571.040000] checking if image is initramfs... it is
[17179571.536000] Freeing initrd memory: 6808k freed
[17179571.548000] ACPI: Looking for DSDT ... not found!
[17179571.560000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
[17179571.560000] SMP alternatives: switching to SMP code
[17179571.560000] Booting processor 1/1 eip 3000
[17179571.572000] Initializing CPU#1
[17179571.652000] Calibrating delay using timer specific routine.. 6000.65 BogoMIPS (lpj=12001307)
[17179571.652000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[17179571.652000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
[17179571.652000] monitor/mwait feature present.
[17179571.652000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.652000] CPU: L2 cache: 2048K
[17179571.652000] CPU: Hyper-Threading is disabled
[17179571.652000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000001
[17179571.652000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
[17179571.652000] Total of 2 processors activated (12011.76 BogoMIPS).
[17179571.652000] ENABLING IO-APIC IRQs
[17179571.652000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.796000] checking TSC synchronization across 2 CPUs: passed.
[17179571.800000] Brought up 2 CPUs
[17179571.800000] NET: Registered protocol family 16
[17179571.800000] EISA bus registered
[17179571.800000] ACPI: bus type pci registered
[17179571.800000] PCI: Using MMCONFIG
[17179571.800000] ACPI: Subsystem revision 20051216
[17179571.804000] ACPI: Interpreter enabled
[17179571.804000] ACPI: Using IOAPIC for interrupt routing
[17179571.804000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.804000] PCI: Probing PCI hardware (bus 00)
[17179571.804000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179571.808000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179571.808000] Boot video device is 0000:01:05.0
[17179571.808000] PCI: Transparent bridge - 0000:00:14.4
[17179571.808000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.812000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179571.812000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179571.816000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[17179571.816000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.816000] pnp: PnP ACPI init
[17179571.820000] pnp: PnP ACPI: found 9 devices
[17179571.820000] PnPBIOS: Disabled by ACPI PNP
[17179571.820000] PCI: Using ACPI for IRQ routing
[17179571.820000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.820000] pnp: 00:05: ioport range 0x400-0x4cf could not be reserved
[17179571.820000] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
[17179571.820000] PCI: Bridge: 0000:00:01.0
[17179571.820000] IO window: 2000-2fff
[17179571.820000] MEM window: 30100000-301fffff
[17179571.820000] PREFETCH window: 20000000-2fffffff
[17179571.820000] PCI: Bridge: 0000:00:14.4
[17179571.820000] IO window: 1000-1fff
[17179571.820000] MEM window: 30000000-300fffff
[17179571.820000] PREFETCH window: disabled.
[17179571.820000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.820000] PCI: Setting latency timer of device 0000:00:14.4 to 64
[17179571.820000] audit: initializing netlink socket (disabled)
[17179571.820000] audit(1172420159.816:1): initialized
[17179571.820000] VFS: Disk quotas dquot_6.5.1
[17179571.820000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.820000] Initializing Cryptographic API
[17179571.820000] io scheduler noop registered
[17179571.820000] io scheduler anticipatory registered
[17179571.820000] io scheduler deadline registered
[17179571.820000] io scheduler cfq registered (default)
[17179571.820000] isapnp: Scanning for PnP cards...
[17179572.172000] isapnp: No Plug & Play device found
[17179572.196000] Real Time Clock Driver v1.12
[17179572.196000] PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[17179572.196000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179572.196000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.196000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.196000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179572.196000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.200000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.200000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.200000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.200000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.200000] mice: PS/2 mouse device common for all mice
[17179572.200000] EISA: Probing bus 0 at eisa.0
[17179572.200000] Cannot allocate resource for EISA slot 1
[17179572.200000] Cannot allocate resource for EISA slot 2
[17179572.200000] Cannot allocate resource for EISA slot 3
[17179572.200000] EISA: Detected 0 cards.
[17179572.204000] NET: Registered protocol family 2
[17179572.248000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.256000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179572.256000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[17179572.256000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179572.256000] TCP: Hash tables configured (established 16384 bind 16384)
[17179572.256000] TCP reno registered
[17179572.256000] TCP bic registered
[17179572.256000] NET: Registered protocol family 1
[17179572.256000] NET: Registered protocol family 8
[17179572.256000] NET: Registered protocol family 20
[17179572.256000] Starting balanced_irq
[17179572.256000] Using IPI No-Shortcut mode
[17179572.256000] ACPI wakeup devices:
[17179572.256000] PB6 AZAL USB0 USB1 USB2 KBC0 UAR1 P2P
[17179572.256000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.256000] Freeing unused kernel memory: 332k freed
[17179572.300000] vga16fb: initializing
[17179572.300000] vga16fb: mapped to 0xc00a0000
[17179572.392000] Console: switching to colour frame buffer device 80x25
[17179572.392000] fb0: VGA16 VGA frame buffer device
[17179573.420000] Capability LSM initialized
[17179573.508000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179573.508000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179574.028000] SCSI subsystem initialized
[17179574.032000] ACPI: bus type scsi registered
[17179574.032000] libata version 1.20 loaded.
[17179574.032000] sata_sil 0000:00:11.0: version 0.9
[17179574.032000] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179574.032000] PCI: Setting latency timer of device 0000:00:11.0 to 64
[17179574.032000] ata1: SATA max UDMA/100 cmd 0xDC86E680 ctl 0xDC86E68A bmdma 0xDC86E600 irq 185
[17179574.032000] ata2: SATA max UDMA/100 cmd 0xDC86E6C0 ctl 0xDC86E6CA bmdma 0xDC86E608 irq 185
[17179574.236000] ata1: no device found (phy stat 00000000)
[17179574.236000] scsi0 : sata_sil
[17179574.440000] ata2: no device found (phy stat 00000000)
[17179574.440000] scsi1 : sata_sil
[17179574.440000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 193
[17179574.440000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[17179574.444000] ata3: SATA max UDMA/100 cmd 0xDC870480 ctl 0xDC87048A bmdma 0xDC870400 irq 193
[17179574.444000] ata4: SATA max UDMA/100 cmd 0xDC8704C0 ctl 0xDC8704CA bmdma 0xDC870408 irq 193
[17179574.648000] ata3: no device found (phy stat 00000000)
[17179574.648000] scsi2 : sata_sil
[17179574.852000] ata4: no device found (phy stat 00000000)
[17179574.852000] scsi3 : sata_sil
[17179574.900000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179574.900000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 201
[17179574.900000] ATIIXP: chipset revision 128
[17179574.900000] ATIIXP: not 100% native mode: will probe irqs later
[17179574.900000] ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
[17179574.900000] ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
[17179574.900000] Probing IDE interface ide0...
[17179575.192000] hda: WDC WD1600BB-22RDA0, ATA DISK drive
[17179575.864000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.884000] Probing IDE interface ide1...
[17179576.624000] hdc: TSSTcorpCD/DVDW TS-H652D, ATAPI CD/DVD-ROM drive
[17179577.296000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.308000] hda: max request size: 1024KiB
[17179577.320000] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[17179577.320000] hda: cache flushes supported
[17179577.320000] hda: hda1 hda2 hda3 < hda5 > hda4
[17179577.356000] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.356000] Uniform CD-ROM driver Revision: 3.20
[17179577.668000] usbcore: registered new driver usbfs
[17179577.672000] usbcore: registered new driver hub
[17179577.672000] PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
[17179577.672000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 209
[17179577.672000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179577.672000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[17179577.672000] ehci_hcd 0000:00:13.2: irq 209, io mem 0x30206000
[17179577.672000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.672000] hub 1-0:1.0: USB hub found
[17179577.672000] hub 1-0:1.0: 8 ports detected
[17179577.676000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179577.676000] PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
[17179577.676000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 209
[17179577.676000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179577.780000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[17179577.780000] ohci_hcd 0000:00:13.0: irq 209, io mem 0x30204000
[17179577.804000] hub 2-0:1.0: USB hub found
[17179577.804000] hub 2-0:1.0: 4 ports detected
[17179577.908000] PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
[17179577.912000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 209
[17179577.912000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179577.912000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[17179577.912000] ohci_hcd 0000:00:13.1: irq 209, io mem 0x30205000
[17179577.936000] hub 3-0:1.0: USB hub found
[17179577.936000] hub 3-0:1.0: 4 ports detected
[17179578.092000] Attempting manual resume
[17179578.112000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.112000] kjournald starting. Commit interval 5 seconds
[17179578.580000] usb 1-8: new high speed USB device using ehci_hcd and address 5
[17179579.016000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[17179579.536000] usb 2-2: new low speed USB device using ohci_hcd and address 3[17179580.048000] usb 2-4: new full speed USB device using ohci_hcd and address 4
[17179586.588000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.660000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.660000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.924000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 201
[17179586.952000] input: PC Speaker as /class/input/input1
[17179586.956000] ALSA /home/james/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:994: hda-intel: no codecs initialized
[17179587.004000] Initializing USB Mass Storage driver...
[17179587.004000] scsi4 : SCSI emulation for USB Mass Storage devices
[17179587.004000] usb-storage: device found at 5
[17179587.004000] usb-storage: waiting for device to settle before scanning
[17179587.004000] scsi5 : SCSI emulation for USB Mass Storage devices
[17179587.004000] usb-storage: device found at 4
[17179587.004000] usb-storage: waiting for device to settle before scanning
[17179587.004000] usbcore: registered new driver usb-storage
[17179587.004000] USB Mass Storage support registered.
[17179587.176000] parport: PnPBIOS parport detected.
[17179587.176000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[17179587.364000] usbcore: registered new driver hiddev
[17179587.372000] input: Logitech Optical USB Mouse as /class/input/input2
[17179587.372000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
[17179587.372000] usbcore: registered new driver usbhid
[17179587.372000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179587.432000] ts: Compaq touchscreen protocol output
[17179587.520000] 8139too Fast Ethernet driver 0.9.27
[17179587.520000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179587.520000] PCI: Setting latency timer of device 0000:02:02.0 to 64
[17179587.520000] eth0: RealTek RTL8139 at 0xdc9b6000, 00:19:d1:10:92:9b, IRQ 177
[17179587.520000] eth0: Identified 8139 chip type 'RTL-8101'
[17179587.532000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179587.532000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0078
[17179587.532000] usbcore: registered new driver usblp
[17179587.532000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179587.668000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179587.684000] lp0: using parport0 (interrupt-driven).
[17179587.732000] Adding 1068280k swap on /dev/hda5. Priority:-1 extents:1 across:1068280k
[17179587.792000] EXT3 FS on hda2, internal journal
[17179587.932000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179587.932000] md: bitmap version 4.39
[17179588.600000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179588.668000] NTFS volume version 3.1.
[17179588.788000] NET: Registered protocol family 17
[17179592.004000] Vendor: SanDisk Model: Cruzer Mini Rev: 0.2
[17179592.004000] Type: Direct-Access ANSI SCSI revision: 02
[17179592.004000] usb-storage: device scan complete
[17179592.012000] Vendor: Generic Model: USB SD Reader Rev: 1.00
[17179592.012000] Type: Direct-Access ANSI SCSI revision: 00
[17179592.016000] Vendor: Generic Model: USB CF Reader Rev: 1.01
[17179592.016000] Type: Direct-Access ANSI SCSI revision: 00
[17179592.024000] Vendor: Generic Model: USB SM Reader Rev: 1.02
[17179592.024000] Type: Direct-Access ANSI SCSI revision: 00
[17179592.028000] Vendor: Generic Model: USB MS Reader Rev: 1.03
[17179592.028000] Type: Direct-Access ANSI SCSI revision: 00
[17179592.036000] usb-storage: device scan complete
[17179592.056000] Driver 'sd' needs updating - please use bus_type methods
[17179592.060000] sd 4:0:0:0: Attached scsi removable disk sda
[17179592.468000] SCSI device sdb: 245504 512-byte hdwr sectors (126 MB)
[17179592.480000] sdb: Write Protect is off
[17179592.480000] sdb: Mode Sense: 03 00 00 00
[17179592.480000] sdb: assuming drive cache: write through
[17179592.504000] SCSI device sdb: 245504 512-byte hdwr sectors (126 MB)
[17179592.512000] sdb: Write Protect is off
[17179592.512000] sdb: Mode Sense: 03 00 00 00
[17179592.512000] sdb: assuming drive cache: write through
[17179592.512000] sdb: sdb1
[17179592.520000] sd 5:0:0:0: Attached scsi removable disk sdb
[17179592.812000] SCSI device sdc: 31360 512-byte hdwr sectors (16 MB)
[17179592.832000] sdc: Write Protect is off
[17179592.832000] sdc: Mode Sense: 03 00 00 00
[17179592.832000] sdc: assuming drive cache: write through
[17179592.892000] SCSI device sdc: 31360 512-byte hdwr sectors (16 MB)
[17179592.908000] sdc: Write Protect is off
[17179592.908000] sdc: Mode Sense: 03 00 00 00
[17179592.908000] sdc: assuming drive cache: write through
[17179592.908000] sdc: sdc1
[17179592.928000] sd 5:0:0:1: Attached scsi removable disk sdc
[17179593.024000] sd 5:0:0:2: Attached scsi removable disk sdd
[17179593.084000] sd 5:0:0:3: Attached scsi removable disk sde
[17179593.100000] sd 4:0:0:0: Attached scsi generic sg0 type 0
[17179593.100000] sd 5:0:0:0: Attached scsi generic sg1 type 0
[17179593.100000] sd 5:0:0:1: Attached scsi generic sg2 type 0
[17179593.100000] sd 5:0:0:2: Attached scsi generic sg3 type 0
[17179593.100000] sd 5:0:0:3: Attached scsi generic sg4 type 0
[17179594.520000] ibm_acpi: ec object not found
[17179594.636000] pcc_acpi: loading...
[17179594.648000] ACPI: Power Button (FF) [PWRF]
[17179594.648000] ACPI: Power Button (CM) [PWRB]
[17179594.972000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[17179594.976000] acpi-cpufreq: CPU1 - ACPI performance management activated.
[17179606.652000] ppdev: user-space parallel port driver
[17179607.888000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179607.888000] [fglrx] Maximum main memory to use for locked dma buffers: 370 MBytes.
[17179607.892000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0[17179608.016000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 217
[17179608.888000] [fglrx] total GART = 67108864
[17179608.888000] [fglrx] free GART = 51118080
[17179608.888000] [fglrx] max single GART = 51118080
[17179608.888000] [fglrx] total LFB = 61796352
[17179608.888000] [fglrx] free LFB = 55504896
[17179608.888000] [fglrx] max single LFB = 55504896
[17179608.888000] [fglrx] total Inv = 0
[17179608.888000] [fglrx] free Inv = 0
[17179608.888000] [fglrx] max single Inv = 0
[17179608.888000] [fglrx] total TIM = 0
[17179632.736000] ISO 9660 Extensions: Microsoft Joliet Level 1
[17179632.796000] ISOFS: changing to secondary root
[17179633.204000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179633.504000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179645.564000] usb 1-8: USB disconnect, address 5
[17179647.064000] usb 1-8: new high speed USB device using ehci_hcd and address 6
[17179647.196000] scsi6 : SCSI emulation for USB Mass Storage devices
[17179647.196000] usb-storage: device found at 6
[17179647.196000] usb-storage: waiting for device to settle before scanning
[17179652.216000] Vendor: SanDisk Model: Cruzer Mini Rev: 0.2
[17179652.216000] Type: Direct-Access ANSI SCSI revision: 02
[17179652.216000] SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB)
[17179652.216000] sda: Write Protect is off
[17179652.216000] sda: Mode Sense: 03 00 00 00
[17179652.216000] sda: assuming drive cache: write through
[17179652.220000] SCSI device sda: 2001888 512-byte hdwr sectors (1025 MB)
[17179652.220000] sda: Write Protect is off
[17179652.220000] sda: Mode Sense: 03 00 00 00
[17179652.220000] sda: assuming drive cache: write through
[17179652.220000] sda: sda1
[17179652.220000] sd 6:0:0:0: Attached scsi removable disk sda
[17179652.220000] sd 6:0:0:0: Attached scsi generic sg0 type 0
[17179652.224000] usb-storage: device scan complete
[17179652.496000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179668.968000] loop: loaded (max 8 devices)
[17179669.036000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179669.068000] truecrypt: no version for "struct_module" found: kernel tainted.