Total memory = 768MB; using 2048kB for hash table (at c0400000)
Linux version 2.6.8-powerpc (root@mini) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Thu Nov 24 00:17:15 UTC 2005
Found UniNorth memory controller & host bridge, revision: 210
Mapped at 0xfdf00000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfde80000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook G4
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=581, gen1=580
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 196608
DMA zone: 196608 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
PowerMac using OpenPIC irq controller at 0x80040000
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc62f000
OpenPIC timer frequency is 4.166666 MHz
PID hash table entries: 4096 (order 12: 32768 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772096k available (1736k kernel code, 1120k data, 164k init, 0k highmem)
AGP special page: 0xeffff000
Calibrating delay loop... 508.92 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 1480k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 0001:10:18.0
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Registering openpic with sysfs...
Using unsupported 1024x768 NVDA,Display-A at a0004000, depth=8, pitch=1024
fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 765 Mhz, High: 998 Mhz, Boot: 765 Mhz
audit: initializing netlink socket (disabled)
audit(2217579592.152:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to colour frame buffer device 128x48
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
MacIO PCI driver attached to Intrepid chipset
Can't request resource 0 for MacIO device 0.80000000:mac-io
input: Macintosh mouse button emulation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
adb: starting probe task...
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard on adb2:2.c4/input
input: ADB Powerbook buttons on adb7:7.1f/input
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse on adb3:3.01/input
adb: finished probe task...
ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: TOSHIBA MK4025GAS, ATA DISK drive
hda: Enabling Ultra DMA 5
Using anticipatory io scheduler
ide0 at 0xf10d0000-0xf10d0007,0xf10d0160 on irq 39
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
Probing IDE interface ide1...
hdc: MATSHITACD-RW CW-8122, ATAPI CD/DVD-ROM drive
hdc: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
hdc: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: Enabling MultiWord DMA 2
ide1 at 0xf10d3000-0xf10d3007,0xf10d3160 on irq 24
mice: PS/2 mouse device common for all mice
Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1480 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 164k init 4k chrp 32k prep
NET: Registered protocol family 1
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB), CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
ohci_hcd 0001:10:18.0: Found HC with no IRQ. Check BIOS/PCI 0001:10:18.0 setup!
PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
ohci_hcd 0001:10:19.0: Found HC with no IRQ. Check BIOS/PCI 0001:10:19.0 setup!
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
ohci_hcd 0001:10:1a.0: Apple Computer Inc. KeyLargo/Intrepid USB (#3)
ohci_hcd 0001:10:1a.0: irq 29, pci mem f10ff000
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: NEC Corporation USB
ohci_hcd 0001:10:1b.0: irq 63, pci mem f1118000
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: NEC Corporation USB (#2)
ohci_hcd 0001:10:1b.1: irq 63, pci mem f111a000
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-1: new full speed USB device using address 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1: new full speed USB device using address 2
Adding 2267568k swap on /dev/hda6. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
adt746x: ADT7460 initializing
adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70 (�C)
adt746x: Setting speed to: 0 for CPU fan.
adt746x: Setting speed to: 0 for GPU fan.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
divert: allocating divert_blk for eth0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:ec:bc:fc
PHY ID: 4061e4, addr: 0
eth0: Found BCM5221 PHY
PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
ehci_hcd 0001:10:1b.2: NEC Corporation USB 2.0
ehci_hcd 0001:10:1b.2: irq 63, pci mem f134c000
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
ehci_hcd 0001:10:1b.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 2-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 4-1: new high speed USB device using address 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffeecbcfc]
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c023a3e4(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: Link down
PHY ID: 4061e4, addr: 0
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: Link down
PHY ID: 4061e4, addr: 0
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
Disabled Privacy Extensions on device eedef800(sit0)
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: no IPv6 routers present
usb 4-1: USB disconnect, address 2
usb 4-2: new high speed USB device using address 3