t mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
xl0 at pci2 dev 9 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:da:66:07:41
bmtphy0 at xl0 phy 24: Broadcom 3C905B internal PHY, rev. 0
fxp0 at pci2 dev 12 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e6
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 13 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e8
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci2 dev 14 function 0 "Promise PDC20267" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 9 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
vga1 at pci2 dev 15 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide1 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 77970176 (38071 MB) as root
dkcsum: wd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: wd1 had no matching BIOS disk
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
syncing disks... done
raid0 detached
rebooting...
OpenBSD 3.7 (GENERIC) #0: Thu Oct 27 14:07:08 CDT 2005
root@fw1.yourwebpro.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 536174592 (523608K)
avail mem = 482037760 (470740K)
using 4278 buffers containing 26910720 bytes (26280K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/02, BIOS32 rev. 0 @ 0xfda74
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf28c0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x9800 0xd2800/0x1000 0xd3800/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
xl0 at pci2 dev 9 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:da:66:07:41
bmtphy0 at xl0 phy 24: Broadcom 3C905B internal PHY, rev. 0
fxp0 at pci2 dev 12 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e6
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 13 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e8
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci2 dev 14 function 0 "Promise PDC20267" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 9 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
vga1 at pci2 dev 15 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide1 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 77970176 (38071 MB) as root
dkcsum: wd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: wd1 had no matching BIOS disk
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
syncing disks... done
raid0 detached
rebooting...
OpenBSD 3.7 (GENERIC) #0: Thu Oct 27 14:07:08 CDT 2005
root@fw1.yourwebpro.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 536174592 (523608K)
avail mem = 482037760 (470740K)
using 4278 buffers containing 26910720 bytes (26280K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/02, BIOS32 rev. 0 @ 0xfda74
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf28c0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x9800 0xd2800/0x1000 0xd3800/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
xl0 at pci2 dev 9 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:da:66:07:41
bmtphy0 at xl0 phy 24: Broadcom 3C905B internal PHY, rev. 0
fxp0 at pci2 dev 12 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e6
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 13 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e8
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci2 dev 14 function 0 "Promise PDC20267" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 9 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
vga1 at pci2 dev 15 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide1 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 77970176 (38071 MB) as root
dkcsum: wd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: wd1 had no matching BIOS disk
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
syncing disks... done
raid0 detached
rebooting...
OpenBSD 3.7 (GENERIC) #0: Thu Oct 27 14:07:08 CDT 2005
root@fw1.yourwebpro.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 536174592 (523608K)
avail mem = 482037760 (470740K)
using 4278 buffers containing 26910720 bytes (26280K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/18/02, BIOS32 rev. 0 @ 0xfda74
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf28c0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x9800 0xd2800/0x1000 0xd3800/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
xl0 at pci2 dev 9 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:da:66:07:41
bmtphy0 at xl0 phy 24: Broadcom 3C905B internal PHY, rev. 0
fxp0 at pci2 dev 12 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e6
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 13 function 0 "Intel 82557" rev 0x0d, i82550: irq 11, address 00:07:e9:6c:15:e8
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci2 dev 14 function 0 "Promise PDC20267" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 9 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
vga1 at pci2 dev 15 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide1 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.7B> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 77970176 (38071 MB) as root
dkcsum: wd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: wd1 had no matching BIOS disk
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
arp info overwritten for 209.242.58.107 by 00:06:5b:fc:c6:d9 on fxp1
arp info overwritten for 209.242.58.107 by 00:d0:b7:b7:41:81 on fxp1
arp info overwritten for 209.242.58.106 by 00:06:5b:fc:c6:da on fxp1