Starting IP Initialization with DHCP...
DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=00:11:e3:4f:e5:46
Logging event: T500.0 Acquired Upstream .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:11:e3:4f:e5:46
CM> DHCPc: Received an Offer from DHCP server 00:0f:34:7c:48:d7 (10.234.192.1); lease client id htype=1, value=00:11:e3:4f:e5:46
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:11:e3:4f:e5:46
DHCPc: Sending Request packet; client id htype=1, value=00:11:e3:4f:e5:46
DHCPc: Received an Ack from DHCP server 00:0f:34:7c:48:d7 (10.234.192.1); lease client id htype=1, value=00:11:e3:4f:e5:46
Current IP address is default 169.0.0.1; removing existing route...
0x00031a38 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.234.218.49
Subnet Mask = 255.255.224.0
Router = 10.234.192.1
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:11:e3:4f:e5:46
State = Bound (4)
Static Lease = false
AutoConfig Mode = IP, Subnet and Router
XID = 0x280b
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:0f:34:7c:48:d7
My offered IP address = 10.234.218.49
(1) Subnet Mask = 255.255.224.0
(3) Router IP address = 10.234.192.1
(54) DHCP Server IP address = 213.57.35.3
(82) Relay Agent IP address = 10.234.192.1
TFTP Server IP address = 10.234.192.1
CM Configuration file = 'HSUBsgvca69834ncxv9'
(2) UTC Time Offset = 7200 seconds
(4) Time Server IP address = 213.57.35.5
(7) Log Server IP address = 213.57.35.3
(51) Lease time = 3409 seconds
(58) T1 (renew) = 1704 seconds
(59) T2 (rebind) = 2982 seconds
Lease is infinite = false
CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
IP addr = 10.234.218.49
SB5100 CM Agent ConfigIp: Ip=10.234.218.49, Subnet=255.255.224.0, Gateway=10.234.192.1
CM> Starting Time Of Day...
0x00031e2a ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 213.57.35.5
Connecting to ToD server 213.57.35.5...
Sending UDP ToD request to server...
Logging event: DHCP WARNING - Non-critical field invalid in response.
Logging event: D511.0 Retrieved DHCP .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
UTC returned by ToD server 3381228309; UTC offset 7200
Current system time -> FRI FEB 23 16:05:09 2007
System start time -> FRI FEB 23 16:01:47 2007
Starting Tftp of configuration file...
Opening file 'HSUBsgvca69834ncxv9' on 10.234.192.1...
tftpInit: Tftp outbound interface flag (1024)
Connected to 10.234.192.1 [69]
mode set to octet.
getting from 10.234.192.1:HSUBsgvca69834ncxv9 [octet]
tftpSend: Attempt #(1) Backoff (2) tickCount (20465) blkReply (1)
Tftp read ZERO bytes, may have reached end of file.
Config file was read! IP Initialization completed...
Test of 1.3.6.1.2.1.69.1.2.1.7.1 to 4 failed w/ error code INCONSISTENT_VALUE
Test of 1.3.6.1.2.1.69.1.2.1.7.2 to 4 failed w/ error code INCONSISTENT_VALUE
Not setting 1.3.6.1.2.1.69.1.2.1.2.1 to 172.19.8.0
Not setting 1.3.6.1.2.1.69.1.2.1.3.1 to 255.255.252.0
Not setting 1.3.6.1.2.1.69.1.2.1.4.1 to public
Not setting 1.3.6.1.2.1.69.1.2.1.5.1 to 2
Not setting 1.3.6.1.2.1.69.1.2.1.6.1 to @
Not setting 1.3.6.1.2.1.69.1.2.1.2.2 to 172.19.9.0
Not setting 1.3.6.1.2.1.69.1.2.1.3.2 to 255.255.255.0
Not setting 1.3.6.1.2.1.69.1.2.1.4.2 to UQWeuqwmdh8237kwehdfkashf
Not setting 1.3.6.1.2.1.69.1.2.1.5.2 to 3
Not setting 1.3.6.1.2.1.69.1.2.1.6.2 to @
Not setting 1.3.6.1.2.1.69.1.3.3.0 to 2
Invalid TLV-11's: 2 wrong values, 0 duplicate sets.
But since we're in FACTORY mode we'll allow it.
MAX CPE per CM is being set to 4
Sending a REG-REQ to the CMTS...
Time Of Day completed...
BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
, cmty="public"
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
v1Trap: linkUpTrap(if2) 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: linkUpTrap(if2) 10.234.218.49->192.168.100.10:226, cmty="public"
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
0x0003203c ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
Logging event: TLV-11 - Illegal Set operation failed
Logging event: D509.0 Retrieved TFTP Config HSUBsgvca69834ncxv9 SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Received a REG-RSP message from the CMTS...
0x00031fe2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
CmDownloadMatchBuffer - length comparison failed
0x00032028 ['CmDocsisCtlThread' id=0x807bda80] CmSecureDownload::ProcessConfigFileSpecifiedCvc: (Secure Software Download) ERROR - Config File manufacturer CVC Subject organizationName does not match the CM's manufacturer name.
0x00032028 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) ERROR - Reject config file MFG CVC!
0x00032028 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a CVC that validates properly!
DOCSIS CoS/QoS rate shaping enable is now true
CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
SB5100 CM Agent enabling management.
v1Trap: warmStartTrap 10.234.218.49->192.168.100.10:226Logging event: D507.0 Retrieved Time....... SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898625> D507.0 Retrieved Time....... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.234.218.49->192.168.100.10:226, cmty="public"
Logging event: Improper Configuration File CVC Format
Sending syslog message from IF 1 to 192.168.100.10:
<131> CABLEMODEM [DOCSIS]: <69020600> Improper Configuration File CVC Format Config File: HSUBsgvca69834ncxv9 - TFTP Server: 10.234.192.1
v1Trap: docsDevCmSwUpgradeCVCFailTrap 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: docsDevCmSwUpgradeCVCFailTrap 10.234.218.49->192.168.100.10:226, cmty="public"
SB5100 CM Event Log sending deferred async messages...
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000200> SYNC Timing Synchronization failure - Failed to acquire FEC framing
Sending syslog message from IF 1 to 192.168.100.10: