rendered paste bodyInspecting /boot/System.map-2.6.18.2-34-bigsmp
Loaded 23284 symbols from /boot/System.map-2.6.18.2-34-bigsmp.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.18.2-34-bigsmp (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
<4> BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
<4> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>On node 0 totalpages: 131068
<7> DMA zone: 4096 pages, LIFO batch:0
<7> Normal zone: 126972 pages, LIFO batch:31
<6>DMI 2.3 present.
<6>Using APIC driver default
<7>ACPI: RSDP (v000 ASUS ) @ 0x000f6870
<7>ACPI: RSDT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
<7>ACPI: FADT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x1fffc100
<7>ACPI: BOOT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x1fffc040
<7>ACPI: MADT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x1fffc080
<7>ACPI: DSDT (v001 ASUS P4S533 0x00001000 MSFT 0x0100000b) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0xe408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:2 APIC version 20
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
<4>Detected 2394.058 MHz processor.
<4>Built 1 zonelists. Total pages: 131068
<5>Kernel command line: root=/dev/hda7 vga=0x31a resume=/dev/hda6 splash=silent
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 8192 bytes)
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 512532k/524272k available (1702k kernel code, 11168k reserved, 1099k data, 200k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 4791.87 BogoMIPS (lpj=9583757)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Hyper-Threading is disabled
<7>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 16k freed
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3193k freed
<6>ACPI: Core revision 20060707
<4>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
<6>Total of 1 processors activated (4791.87 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<4>migration_cost=0
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xf15b0, last bus=1
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
<6>Enabling SiS 96x SMBus.
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 16 devices
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
<6>pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
<6>pnp: 00:02: ioport range 0xe600-0xe61f has been reserved
<6>pnp: 00:02: ioport range 0x480-0x48f has been reserved
<6>pnp: 00:0f: ioport range 0x3f0-0x3f1 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: e7000000-e7ffffff
<6> PREFETCH window: ef700000-febfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 8192)
<6>TCP reno registered
<6>Simple Boot Flag at 0x3a set to 0x1
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1172081804.724:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:e8a0
<6>vesafb: pmi: set display start = c00ce8e5, set palette = c00ce96a
<6>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<4>logips2pp: Detected unknown logitech mouse model 14
<6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 200k freed
<6>Time: tsc clocksource has been installed.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<3>ACPI: Invalid PBLK length [5]
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 208
<6>SIS5513: not 100% native mode: will probe irqs later
<6>SIS5513: SiS 961B MuTIOL IDE UDMA133 controller
<6> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: WDC WD1600JB-00REA0, ATA DISK drive
<4>hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 512KiB
<6>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
<6>hdb: max request size: 128KiB
<6>hdb: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63, UDMA(66)
<6>hdb: cache flushes not supported
<6> hdb: hdb1
<7>Probing IDE interface ide1...
<4>hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>airo(): Probing for PCI adapters
<6>airo(): Finished probing for PCI adapters
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
<6>lp0: using parport0 (interrupt-driven).
<6>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0x9400, speed 1169kHz
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 20 (level, low) -> IRQ 169
<6>ohci_hcd 0000:00:02.2: OHCI Host Controller
<6>ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:02.2: irq 169, io mem 0xe6800000
<6>USB Universal Host Controller Interface driver v3.0
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.2-34-bigsmp ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.2
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 3 ports detected
<6>ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 177
<6>ohci_hcd 0000:00:02.3: OHCI Host Controller
<6>ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:02.3: irq 177, io mem 0xe6000000
<7>ieee1394: Initialized config rom entry `ip1394'
<6>sis900.c: v1.08.10 Apr. 2 2006
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.2-34-bigsmp ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:02.3
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 3 ports detected
<6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 185
<6>ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 193
<6>PCI: VIA IRQ fixup for 0000:00:09.0, from 10 to 1
<6>uhci_hcd 0000:00:09.0: UHCI Host Controller
<6>uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:09.0: irq 193, io base 0x0000a400
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.18.2-34-bigsmp uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:09.0
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:09.1[B] -> GSI 18 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:09.1, from 5 to 9
<6>uhci_hcd 0000:00:09.1: UHCI Host Controller
<6>uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:09.1: irq 201, io base 0x0000a000
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.18.2-34-bigsmp uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:09.1
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 193
<6>ACPI: PCI Interrupt 0000:00:09.2[C] -> GSI 19 (level, low) -> IRQ 209
<6>PCI: VIA IRQ fixup for 0000:00:09.2, from 9 to 1
<6>ehci_hcd 0000:00:09.2: EHCI Host Controller
<6>ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:09.2: irq 209, io mem 0xe5000000
<6>ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.18.2-34-bigsmp ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:09.2
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 4 ports detected
<6>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 22 (level, low) -> IRQ 217
<6>0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1.
<6>0000:00:03.0: Using transceiver found at address 1 as default
<6>eth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 217, 00:e0:18:a0:3c:c0.
<6>agpgart: Detected SiS 646 chipset
<6>agpgart: AGP aperture is 64M @ 0xe8000000
<6>ACPI: PCI Interrupt 0000:00:0c.2[B] -> GSI 17 (level, low) -> IRQ 193
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[e4000000-e40007ff] Max Packet=[2048] IR/IT contexts=[4/8]
<6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c009105a10e]
<6>Adding 875468k swap on /dev/hda6. Priority:-1 extents:1 across:875468k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
<6>loop: loaded (max 8 devices)
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda8, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>NTFS driver 2.1.27 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>AppArmor: AppArmor initialized
<5>audit(1172081819.596:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Feb 21 18:16:46 2007
Trying manual resume from /dev/hda6
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading processor
Loading thermal
Loading sis5513
Loading fan
Loading edd
Loading jbd
Loading mbcache
Loading ext3
Waiting for device /dev/hda7 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda7
/dev/hda7: Superblock last write time is in the future. FIXED.
/dev/hda7: clean, 146889/2626560 files, 989486/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/hda7
Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Feb 21 13:16:50 2007
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
/dev/hda8: Superblock last write time is in the future. FIXED.
/dev/hda8: clean, 832/5641440 files, 225159/11279630 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda8 on /home type ext3 (rw,acl,user_xattr)
/dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/hdb1 on /windows/D type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/hda5 on /windows/E type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
done<notice>'boot.localfs start' exits with status 0
<notice>boot.apparmor start
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(841,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'linux-o181'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(841,3)
INIT:
Boot logging started on /dev/tty1(/dev/console) at Wed Feb 21 18:17:08 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Loading AppArmor profiles - AppArmor already loaded with profiles.skipped
done
Entering runlevel: 5
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/acpid ]
[acpid]: starting up
[acpid]: 0 rules loaded
acpid: loading ACPI modules ( ac battery button ) done
acpid: will not skip unsupported modules
acpid: loading ACPI laptop modules ( ) done
Starting acpid done
Starting D-Bus daemondone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ resume=/dev/hda6 PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting syslog services<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ resume=/dev/hda6 PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting irqbalance unused
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
Starting PolicyKit daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Loading keymap i386/qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneStarting HAL daemondone
Loading CPUFreq modules (CPUFreq not supported)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
No configuration found for eth0
unusedWaiting for mandatory devices: wlan0 __NSC__
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
wlan0 No interface found
failedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
done
Starting nfsboot (sm-notify) done
Checking/updating CPU microcode done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting ZENworks Management Daemondone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
xend unused
xendomains unused
Starting service gdm<notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 resume=/dev/hda6 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/bin/gnome splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: irq_balancer nfs smbfs xend xendomains
<notice>killproc: kill(2408,3)