rendered paste bodylocalhost iggy # dmesg
00
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a00000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34432 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 256022
[ 0.000000] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/s2 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1 pcnomsi xdriver=radeon res=1024x768 refresh=60
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 32.394924] Console: colour dummy device 80x25
[ 32.395734] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.396365] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.396491] Checking aperture...
[ 32.396494] CPU 0: aperture @ ab8000000 size 32 MB
[ 32.396496] Aperture too small (32 MB)
[ 32.401422] No AGP bridge found
[ 32.410853] Memory: 1014676k/1048512k available (5866k kernel code, 33448k rerved, 2721k data, 384k init)
[ 32.470857] Calibrating delay using timer specific routine.. 4423.97 BogoMIPSlpj=2211987)
[ 32.470911] Security Framework v1.0.0 initialized
[ 32.470916] SELinux: Initializing.
[ 32.470935] SELinux: Starting in permissive mode
[ 32.470940] selinux_register_security: Registering secondary module capabili
[ 32.470942] Capability LSM initialized as secondary
[ 32.470965] Mount-cache hash table entries: 256
[ 32.471104] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 32.471106] CPU: L2 Cache: 1024K (64 bytes/line)
[ 32.471109] CPU 0/0 -> Node 0
[ 32.471122] SMP alternatives: switching to UP code
[ 32.471486] ACPI: Core revision 20060707
[ 32.487864] Using local APIC timer interrupts.
[ 32.533082] result 12564593
[ 32.533084] Detected 12.564 MHz APIC timer.
[ 32.533866] Brought up 1 CPUs
[ 32.533904] testing NMI watchdog ... OK.
[ 32.543907] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 32.543910] time.c: Detected 2211.364 MHz processor.
[ 32.544064] checking if image is initramfs... it is
[ 32.830115] Freeing initrd memory: 7719k freed
[ 32.835015] NET: Registered protocol family 16
[ 32.835180] ACPI: bus type pci registered
[ 32.838228] PCI: Using MMCONFIG at e0000000
[ 32.838247] PCI: No mmconfig possible on device 00:18
[ 32.847479] ACPI: Interpreter enabled
[ 32.847481] ACPI: Using IOAPIC for interrupt routing
[ 32.847957] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.847962] PCI: Probing PCI hardware (bus 00)
[ 32.853722] PCI: Transparent bridge - 0000:00:09.0
[ 32.853940] Boot video device is 0000:05:00.0
[ 32.854010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.938415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 32.940498] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.940905] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.941307] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.941707] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.942123] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) * disabled.
[ 32.942522] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.942947] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) * disabled.
[ 32.943346] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.943753] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.944155] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.944556] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.944961] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.945360] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) * disabled.
[ 32.945773] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.946187] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.946602] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) * disabled.
[ 32.947057] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 32.947501] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 32.947947] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 32.948390] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 32.948735] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 32.949199] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 32.949656] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 32.950112] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 32.950565] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 32.951024] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 32.951476] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 32.951930] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 32.952384] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 32.952857] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 32.953321] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 32.953785] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 32.956896] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.956908] pnp: PnP ACPI init
[ 32.964628] pnp: PnP ACPI: found 14 devices
[ 32.964796] SCSI subsystem initialized
[ 32.964820] libata version 2.00 loaded.
[ 32.964879] usbcore: registered new interface driver usbfs
[ 32.964906] usbcore: registered new interface driver hub
[ 32.964934] usbcore: registered new device driver usb
[ 32.964946] PCI: Using ACPI for IRQ routing
[ 32.964950] PCI: If a device doesn't work, try "pci=routeirq". If it helps, st a report
[ 32.965011] NetLabel: Initializing
[ 32.965013] NetLabel: domain hash size = 128
[ 32.965015] NetLabel: protocols = UNLABELED CIPSOv4
[ 32.965027] NetLabel: unlabeled traffic allowed by default
[ 32.965064] PCI-DMA: Disabling IOMMU.
[ 32.965607] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 32.965610] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 32.965613] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 32.965616] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 32.965619] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 32.965622] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 32.965647] ieee1394: Initialized config rom entry `ip1394'
[ 32.965957] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 32.965962] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (lev, low) -> IRQ 19
[ 33.019197] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fe9ff000e9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 33.024250] PCI: Bridge: 0000:00:09.0
[ 33.024253] IO window: d000-dfff
[ 33.024255] MEM window: fe900000-fe9fffff
[ 33.024258] PREFETCH window: fea00000-feafffff
[ 33.024260] PCI: Bridge: 0000:00:0b.0
[ 33.024262] IO window: c000-cfff
[ 33.024264] MEM window: fe800000-fe8fffff
[ 33.024267] PREFETCH window: fe700000-fe7fffff
[ 33.024269] PCI: Bridge: 0000:00:0c.0
[ 33.024271] IO window: b000-bfff
[ 33.024273] MEM window: fe600000-fe6fffff
[ 33.024276] PREFETCH window: fe500000-fe5fffff
[ 33.024278] PCI: Bridge: 0000:00:0d.0
[ 33.024280] IO window: a000-afff
[ 33.024282] MEM window: fe400000-fe4fffff
[ 33.024285] PREFETCH window: fe300000-fe3fffff
[ 33.024288] PCI: Bridge: 0000:00:0e.0
[ 33.024290] IO window: 9000-9fff
[ 33.024292] MEM window: fe200000-fe2fffff
[ 33.024295] PREFETCH window: d0000000-dfffffff
[ 33.024298] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 33.024303] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.024307] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.024311] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.024315] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.024343] NET: Registered protocol family 2
[ 33.033813] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 33.034064] TCP established hash table entries: 131072 (order: 9, 2097152 byt)
[ 33.035311] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 33.035919] TCP: Hash tables configured (established 131072 bind 65536)
[ 33.035922] TCP reno registered
[ 33.036495] audit: initializing netlink socket (disabled)
[ 33.036504] audit(1171994704.597:1): initialized
[ 33.036546] Total HugeTLB memory allocated, 0
[ 33.036632] VFS: Disk quotas dquot_6.5.1
[ 33.036649] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 33.036744] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 33.036761] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
[ 33.036952] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.037216] NTFS driver 2.1.27 [Flags: R/W].
[ 33.037255] QNX4 filesystem 0.2.3 registered.
[ 33.037257] fuse init (API version 7.8)
[ 33.037323] JFS: nTxBlock = 7987, nTxLock = 63899
[ 33.040988] SGI XFS with ACLs, security attributes, realtime, large block/ino numbers, no debug enabled
[ 33.041138] SGI XFS Quota Management subsystem
[ 33.041173] SELinux: Registering netfilter hooks
[ 33.047795] io scheduler noop registered
[ 33.047797] io scheduler anticipatory registered
[ 33.047799] io scheduler deadline registered
[ 33.047811] io scheduler cfq registered (default)
[ 33.062015] PCI: Linking AER extended capability on 0000:00:0b.0
[ 33.062021] PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disable
[ 33.062027] PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
[ 33.062030] PCI: Linking AER extended capability on 0000:00:0c.0
[ 33.062034] PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disable
[ 33.062039] PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
[ 33.062042] PCI: Linking AER extended capability on 0000:00:0d.0
[ 33.062046] PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disable
[ 33.062051] PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
[ 33.062054] PCI: Linking AER extended capability on 0000:00:0e.0
[ 33.062057] PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disable
[ 33.062063] PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
[ 33.062262] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.062264] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor OS
[ 33.062276] assign_interrupt_mode Found MSI capability
[ 33.062279] Allocate Port Service[0000:00:0b.0:pcie00]
[ 33.062308] Allocate Port Service[0000:00:0b.0:pcie03]
[ 33.062350] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.062353] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor OS
[ 33.062364] assign_interrupt_mode Found MSI capability
[ 33.062366] Allocate Port Service[0000:00:0c.0:pcie00]
[ 33.062391] Allocate Port Service[0000:00:0c.0:pcie03]
[ 33.062431] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.062433] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor OS
[ 33.062444] assign_interrupt_mode Found MSI capability
[ 33.062446] Allocate Port Service[0000:00:0d.0:pcie00]
[ 33.062470] Allocate Port Service[0000:00:0d.0:pcie03]
[ 33.062510] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.062513] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor OS
[ 33.062523] assign_interrupt_mode Found MSI capability
[ 33.062525] Allocate Port Service[0000:00:0e.0:pcie00]
[ 33.062550] Allocate Port Service[0000:00:0e.0:pcie03]
[ 33.085433] lp: driver loaded but no devices found
[ 33.085483] Real Time Clock Driver v1.12ac
[ 33.088740] ppdev: user-space parallel port driver
[ 33.088759] Linux agpgart interface v0.101 (c) Dave Jones
[ 33.088850] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010680000, ing 3072k, total 16384k
[ 33.088853] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 33.088855] vesafb: scrolling: redraw
[ 33.088858] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 33.093502] Console: switching to colour frame buffer device 128x48
[ 33.098729] fbsplash: console 0 using theme 'sabayon'
[ 33.276220] fbsplash: switched splash state to 'on' on console 0
[ 33.276509] fb0: VESA VGA frame buffer device
[ 33.276546] ACPI: Power Button (FF) [PWRF]
[ 33.276553] ACPI: Power Button (CM) [PWRB]
[ 33.276571] ACPI: Fan [FAN] (on)
[ 33.276650] Using specific hotkey driver
[ 33.276706] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Deve is not present [20060707]
[ 33.276712] ACPI: Getting cpuindex for acpiid 0x1
[ 33.281153] ACPI: Thermal Zone [THRM] (22 C)
[ 33.281170] ibm_acpi: ec object not found
[ 33.281176] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing sabled
[ 33.281274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 33.281798] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 33.282110] parport: PnPBIOS parport detected.
[ 33.282151] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.363752] lp0: using parport0 (interrupt-driven).
[ 33.363875] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq,12
[ 33.366251] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 33.366255] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 33.366259] parport0: cannot grant exclusive access for device parkbd
[ 33.366392] mice: PS/2 mouse device common for all mice
[ 33.380228] FDC 0 is a post-1991 82077
[ 33.381460] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blockze
[ 33.381681] loop: loaded (max 8 devices)
[ 33.381683] Compaq SMART2 Driver (v 2.6.0)
[ 33.381709] HP CISS Driver (v 3.6.10)
[ 33.381800] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 33.381826] MM: desc_per_page = 128
[ 33.381987] input: Macintosh mouse button emulation as /class/input/input0
[ 33.382072] Loading iSCSI transport class v2.0-724.<6>Adaptec aacraid driver .1-5[2409]-mh2)
[ 33.382327] QLogic Fibre Channel HBA Driver
[ 33.382383] iscsi: registered transport (qla4xxx)
[ 33.382406] QLogic iSCSI HBA Driver
[ 33.382408] Emulex LightPulse Fibre Channel SCSI driver 8.1.10
[ 33.382410] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 33.382511] DC390: clustering now enabled by default. If you get problems loa
[ 33.382512] with "disable_clustering=1" and report to maintainers
[ 33.382563] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
[ 33.382617] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 33.382699] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 33.382725] 3ware Storage Controller device driver for Linux v1.26.02.001.
[ 33.382752] 3ware 9000 Storage Controller device driver for Linux v2.26.02.00
[ 33.382777] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 33.382801] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[ 33.382830] osst :I: Tape driver with OnStream support version 0.99.4
[ 33.382831] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 33.383054] sata_sil 0000:01:0d.0: version 2.0
[ 33.383365] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 33.383372] ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (lev, low) -> IRQ 16
[ 33.383740] sata_sil 0000:01:0d.0: Applying R_ERR on DMA activate FIS errata x
[ 33.383815] ata1: SATA max UDMA/100 cmd 0xFFFFC20000044080 ctl 0xFFFFC20000048A bmdma 0xFFFFC20000044000 irq 16
[ 33.383843] ata2: SATA max UDMA/100 cmd 0xFFFFC200000440C0 ctl 0xFFFFC2000004CA bmdma 0xFFFFC20000044008 irq 16
[ 33.383870] ata3: SATA max UDMA/100 cmd 0xFFFFC20000044280 ctl 0xFFFFC20000048A bmdma 0xFFFFC20000044200 irq 16
[ 33.383896] ata4: SATA max UDMA/100 cmd 0xFFFFC200000442C0 ctl 0xFFFFC2000004CA bmdma 0xFFFFC20000044208 irq 16
[ 33.383910] scsi0 : sata_sil
[ 33.386831] input: AT Translated Set 2 keyboard as /class/input/input1
[ 33.573250] logips2pp: Detected unknown logitech mouse model 62
[ 33.686642] ata1: SATA link down (SStatus 0 SControl 310)
[ 33.686651] scsi1 : sata_sil
[ 33.989589] ata2: SATA link down (SStatus 0 SControl 310)
[ 33.989595] scsi2 : sata_sil
[ 34.085692] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[ 34.281656] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000069e708]
[ 34.292536] ata3: SATA link down (SStatus 0 SControl 310)
[ 34.292543] scsi3 : sata_sil
[ 34.595483] ata4: SATA link down (SStatus 0 SControl 310)
[ 34.595629] sata_nv 0000:00:07.0: version 2.0
[ 34.596154] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 34.596160] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (lev, low) -> IRQ 23
[ 34.596329] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 34.596382] ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 23
[ 34.596407] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 23
[ 34.596418] scsi4 : sata_nv
[ 34.899429] ata5: SATA link down (SStatus 0 SControl 300)
[ 34.899435] scsi5 : sata_nv
[ 35.353364] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.353928] ata6.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 35.353930] ata6.00: ata6: dev 0 multi count 16
[ 35.354568] ata6.00: configured for UDMA/133
[ 35.354640] scsi 5:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ0 ANSI: 5
[ 35.354714] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 35.354723] sda: Write Protect is off
[ 35.354725] sda: Mode Sense: 00 3a 00 00
[ 35.354737] SCSI device sda: drive cache: write back
[ 35.354775] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 35.354782] sda: Write Protect is off
[ 35.354784] sda: Mode Sense: 00 3a 00 00
[ 35.354795] SCSI device sda: drive cache: write back
[ 35.354798] sda: sda1 sda2 sda3
[ 35.379335] sd 5:0:0:0: Attached scsi disk sda
[ 35.379389] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 35.379927] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 35.379933] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (lev, low) -> IRQ 22
[ 35.380076] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 35.380129] ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF100 irq 22
[ 35.380153] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF108 irq 22
[ 35.380164] scsi6 : sata_nv
[ 35.683292] ata7: SATA link down (SStatus 0 SControl 300)
[ 35.683298] scsi7 : sata_nv
[ 35.986238] ata8: SATA link down (SStatus 0 SControl 300)
[ 35.986372] pata_amd 0000:00:06.0: version 0.2.4
[ 35.986388] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 35.986411] ata9: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFB00 irq 14
[ 35.986436] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFB08 irq 15
[ 35.986448] scsi8 : pata_amd
[ 36.289245] ata9.00: ATAPI, max UDMA/33
[ 36.441213] ata9.00: configured for UDMA/33
[ 36.441216] scsi9 : pata_amd
[ 36.602711] ATA: abnormal status 0x8 on port 0x177
[ 36.603729] scsi 8:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ0 ANSI: 5
[ 36.607203] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 36.607206] Uniform CD-ROM driver Revision: 3.20
[ 36.607257] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 36.607308] sr 8:0:0:0: Attached scsi generic sg1 type 5
[ 36.608049] I2O subsystem v1.325
[ 36.608051] i2o: max drivers = 8
[ 36.608118] I2O Configuration OSM v1.323
[ 36.608161] I2O Bus Adapter OSM v1.317
[ 36.608183] I2O Block Device OSM v1.325
[ 36.608245] I2O SCSI Peripheral OSM v1.316
[ 36.608265] I2O ProcFS OSM v1.316
[ 36.608286] Fusion MPT base driver 3.04.02
[ 36.608287] Copyright (c) 1999-2005 LSI Logic Corporation
[ 36.608291] Fusion MPT SPI Host driver 3.04.02
[ 36.608319] Fusion MPT FC Host driver 3.04.02
[ 36.608350] Fusion MPT SAS Host driver 3.04.02
[ 36.608384] Fusion MPT misc device (ioctl) driver 3.04.02
[ 36.608410] mptctl: Registered with Fusion MPT base driver
[ 36.608412] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 36.608414] Fusion MPT LAN driver 3.04.02
[ 36.608416] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 36.608418] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 36.608476] usbcore: registered new interface driver usblp
[ 36.608479] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 36.608481] Initializing USB Mass Storage driver...
[ 36.608501] usbcore: registered new interface driver usb-storage
[ 36.608503] USB Mass Storage support registered.
[ 36.608524] usbcore: registered new interface driver libusual
[ 36.608547] usbcore: registered new interface driver hiddev
[ 36.608568] usbcore: registered new interface driver usbhid
[ 36.608571] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 36.608583] md: linear personality registered for level -1
[ 36.608585] md: raid0 personality registered for level 0
[ 36.608587] md: raid1 personality registered for level 1
[ 36.608589] md: raid10 personality registered for level 10
[ 36.624641] raid6: int64x1 1578 MB/s
[ 36.641607] raid6: int64x2 2238 MB/s
[ 36.658595] raid6: int64x4 2375 MB/s
[ 36.675597] raid6: int64x8 1761 MB/s
[ 36.692582] raid6: sse2x1 2664 MB/s
[ 36.709582] raid6: sse2x2 3718 MB/s
[ 36.726583] raid6: sse2x4 4015 MB/s
[ 36.726585] raid6: using algorithm sse2x4 (4015 MB/s)
[ 36.726587] md: raid6 personality registered for level 6
[ 36.726589] md: raid5 personality registered for level 5
[ 36.726591] md: raid4 personality registered for level 4
[ 36.726594] raid5: automatically using best checksumming function: generic_ss
[ 36.731570] generic_sse: 6764.000 MB/sec
[ 36.731572] raid5: using function: generic_sse (6764.000 MB/sec)
[ 36.731575] md: multipath personality registered for level -4
[ 36.731577] md: faulty personality registered for level -5
[ 36.731625] device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-del@redhat.com
[ 36.731769] Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 14:07:24 2006 UTC).
[ 36.731804] ALSA device list:
[ 36.731805] No soundcards found.
[ 36.731861] TCP bic registered
[ 36.731868] NET: Registered protocol family 1
[ 36.731874] NET: Registered protocol family 17
[ 36.731947] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processorsversion 2.00.00)
[ 36.731984] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 36.731986] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 36.731989] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 36.731991] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 36.732031] Suspend2 Core.
[ 36.732043] Suspend2 Userspace UI Support module loaded.
[ 36.732065] Suspend2 Checksumming module loaded.
[ 36.732085] Suspend2 Userspace Storage Manager module loaded.
[ 36.732108] Suspend2 Compressor module loaded.
[ 36.732132] Suspend2 Encryptor module loaded.
[ 36.732154] Suspend2 Block I/O module loaded.
[ 36.732156] Suspend2 Swap Allocator module loaded.
[ 36.732176] Suspend2 File Allocator module loaded.
[ 36.732235] ACPI: (supports S0 S1 S4 S5)
[ 36.732267] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 36.732350] Freeing unused kernel memory: 384k freed
[ 36.814690] ata1: hard resetting port
[ 36.915899] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 36.915907] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (lev, low) -> IRQ 21
[ 36.916097] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 36.916102] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 36.916205] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus numbe1
[ 36.916231] ehci_hcd 0000:00:02.1: debug port 1
[ 36.916234] PCI: cache line size of 64 is not supported by device 0000:00:02.
[ 36.916243] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 36.916249] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 04
[ 36.916351] usb usb1: configuration #1 chosen from 1 choice
[ 36.916385] hub 1-0:1.0: USB hub found
[ 36.916392] hub 1-0:1.0: 10 ports detected
[ 37.039048] USB Universal Host Controller Interface driver v3.0
[ 37.054747] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Drer (PCI)
[ 37.055195] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 37.055203] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (lev, low) -> IRQ 20
[ 37.055381] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 37.055386] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 37.055483] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus numbe2
[ 37.055502] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000
[ 37.109139] usb usb2: configuration #1 chosen from 1 choice
[ 37.109172] hub 2-0:1.0: USB hub found
[ 37.109180] hub 2-0:1.0: 10 ports detected
[ 37.121042] ata1: SATA link down (SStatus 0 SControl 310)
[ 37.121050] ata1: EH complete
[ 37.227173] sl811: driver sl811-hcd, 19 May 2005
[ 37.296085] Registering unionfs 1.5pre
[ 37.296088] unionfs: debugging is not enabled
[ 38.330431] Suspend2 2.2.9: You need to use a resume2= command line parametero tell Suspend2 where to look for an image.
[ 38.330435] Suspend2 2.2.9: Resume2 parameter is empty. Suspending will be dibled.
[ 38.330438] Suspend2 2.2.9: Missing or invalid storage location (resume2= pareter). Please correct and rerun lilo (or equivalent) before suspending.
[ 38.375236] kjournald starting. Commit interval 5 seconds
[ 38.375243] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.663921] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 07.
[ 43.666098] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 43.666101] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (lev, low) -> IRQ 23
[ 43.666106] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 43.666114] forcedeth: using HIGHDMA
[ 44.180944] eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
[ 44.185359] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 44.185363] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (lev, low) -> IRQ 22
[ 44.185605] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 44.497758] intel8x0_measure_ac97_clock: measured 50763 usecs
[ 44.497762] intel8x0: clocking to 46858
[ 46.199762] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 46.199771] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (lev, low) -> IRQ 17
[ 46.199776] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
[ 46.997772] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 46.997794] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 47.489943] input: PC Speaker as /class/input/input3
[ 48.416523] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (lev, low) -> IRQ 16
[ 48.416536] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 48.416743] sky2 v1.10 addr 0xfe6fc000 irq 16 Yukon-EC (0xb6) rev 1
[ 48.416857] sky2 eth1: addr 00:0c:76:af:61:f7
[ 49.320942] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 49.320951] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (lev, low) -> IRQ 18
[ 49.320967] PCI: Unable to reserve mem region #1:10000000@d0000000 for device000:05:00.0
[ 49.320970] radeonfb (0000:05:00.0): cannot request region 0.
[ 49.320974] radeonfb: probe of 0000:05:00.0 failed with error -16
[ 53.276924] EXT3 FS on sda2, internal journal
[ 53.925886] NTFS volume version 3.1.
[ 53.925891] NTFS-fs warning (device sda1): load_system_files(): Unsupported vume flags 0x4000 encountered.
[ 53.925896] NTFS-fs error (device sda1): load_system_files(): Volume has unsuorted flags set. Mounting read-only. Run chkdsk and mount in Windows.
[ 53.945295] NTFS-fs warning (device sda1): load_system_files(): $LogFile is n clean. Will not be able to remount read-write. Mount in Windows.
[ 54.057178] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:96472k
[ 67.775075] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 67.775084] rt2500 EEPROM: 4 4 4 4 4 4 4 4 4 4 4 4 4 4 dBm Maxum
[ 67.959900] eth0: no link during initialization.
[ 68.143543] sky2 eth1: enabling interface
[ 69.956781] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 70.586830] fbsplash: console 1 using theme 'sabayon'
[ 70.591504] fbsplash: switched splash state to 'on' on console 1
[ 70.662769] fbsplash: console 2 using theme 'sabayon'
[ 70.674765] fbsplash: switched splash state to 'on' on console 2
[ 70.689252] fbsplash: console 3 using theme 'sabayon'
[ 70.693870] fbsplash: switched splash state to 'on' on console 3
[ 70.702197] fbsplash: console 4 using theme 'sabayon'
[ 70.706762] fbsplash: switched splash state to 'on' on console 4
[ 70.711865] fbsplash: console 5 using theme 'sabayon'
[ 70.716469] fbsplash: switched splash state to 'on' on console 5
[ 70.719695] fbsplash: console 11 using theme 'sabayon'
[ 70.724245] fbsplash: switched splash state to 'on' on console 11
[ 72.524197] [drm] Initialized drm 1.0.1 20051102
[ 72.577604] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 73.737831] [drm] Setting GART location based on new memory map
[ 73.738460] [drm] Loading R300 Microcode
[ 73.738484] [drm] writeback test succeeded in 1 usecs
[ 449.104454] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 449.186451] usb 1-5: configuration #1 chosen from 1 choice
[ 449.186680] scsi10 : SCSI emulation for USB Mass Storage devices
[ 449.186782] usb-storage: device found at 2
[ 449.186785] usb-storage: waiting for device to settle before scanning
[ 453.666510] scsi 10:0:0:0: Direct-Access ST325082 4A 3.AA P 0 ANSI: 0
[ 453.668126] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 453.670345] sdb: Write Protect is off
[ 453.670348] sdb: Mode Sense: 03 00 00 00
[ 453.670350] sdb: assuming drive cache: write through
[ 453.673034] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 453.675256] sdb: Write Protect is off
[ 453.675259] sdb: Mode Sense: 03 00 00 00
[ 453.675261] sdb: assuming drive cache: write through
[ 453.675264] sdb: sdb1
[ 453.684960] sd 10:0:0:0: Attached scsi disk sdb
[ 453.685003] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 453.688159] usb-storage: device scan complete
[ 1403.483257] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, arnberg, GERMANY' taints kernel.
[ 1403.486259] [fglrx] Maximum main memory to use for locked dma buffers: 916 MBes.
[ 1403.486336] [fglrx:firegl_init_module] *ERROR* firegl_stub_register failed