rendered paste bodylocalhost joel # FIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (B
UILD 20061101134833)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000
RAM TEST (fill random)... Done.
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
Welcome to SmartFirmware(tm) for bplan EFIKA5K2
Version 1.3 (20061107101950)
SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
All Rights Reserved.
Pegasos BIOS Extensions Copyright 2001-2006 by bplan GmbH.
All Rights Reserved.
ok setenv server-ip 192.168.0.1
server-ip = 192.168.0.1
ok setenv client-ip 192.168.0.254
client-ip = 192.168.0.254
ok 8.0.254 panic=10 root=/dev/nfs nfsroot=192.168.0.1:/nfsroot/efika
zImage starting: loaded at 0x00400000 (sp: 0x017ffe90)
Allocating 0x36da6c bytes for kernel ...
OF version = 'EFIKA5K2,1.3'
gunzipping (0x1800000 <- 0x409000:0x587d3c)...done 0x34e02c bytes
OF stdout device is: /failsafe
command line: console=ttyPSC0 ip=192.168.0.254 panic=10 root=/dev/nfs nfsroot=19
2.168.0.1:/nfsroot/efika
memory layout at init:
alloc_bottom : 01b72000
alloc_top : 30000000
alloc_top_hi : f000c000
rmo_top : 30000000
ram_top : f000c000
Looking for displays
instantiating rtas at 0x07ffb000 ... done
Applying EFIKA device tree fixups
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x01b73000 -> 0x01b736c9
Device tree struct 0x01b74000 -> 0x01b76000
Calling quiesce ...
returning from prom_init
Using Efika machine description
Only using first contiguous memory region<5>Linux version 2.6.19-efika-r5-efika
(root@localhost) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 Tue Feb 20 19:14:15 UTC 2
007
Efika: PCI bus 0 controlled by /pci@80000000
Zone PFN ranges:
DMA 0 -> 32768
Normal 32768 -> 32768
early_node_map[1] active PFN ranges
0: 0 -> 32768
Built 1 zonelists. Total pages: 32512
Kernel command line: console=ttyPSC0 ip=192.168.0.254 panic=10 root=/dev/nfs nfs
root=192.168.0.1:/nfsroot/efika
MPC52xx PIC: MPC52xx PIC Remapped at 0xf0000500
MPC52xx PIC: MPC52xx SDMA Remapped at 0xf0001200
MPC52xx PIC is up and running!
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126292k/131072k available (2948k kernel code, 4636k reserved, 292k data,
146k bss, 172k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Efika : Added pic@f0000500 (type 'interrupt-controller' at '/builtin@F0000000/pi
c@F0000500') to the known devices
Efika : Added bestcomm@f0001200 (type 'dma-controller' at '/builtin@F0000000/bes
tcomm@F0001200') to the known devices
Efika : Added sram@f0008000 (type 'memory' at '/builtin@F0000000/sram@F0008000')
to the known devices
Efika : Added ata@f0003a00 (type 'ata' at '/builtin@F0000000/ata@F0003A00') to t
he known devices
Efika : Added usb@f0001000 (type 'usb' at '/builtin@F0000000/usb@F0001000') to t
he known devices
Efika : Added ethernet@f0003000 (type 'network' at '/builtin@F0000000/ethernet@F
0003000') to the known devices
Efika : Added sound@f0002200 (type 'sound' at '/builtin@F0000000/sound@F0002200'
) to the known devices
Efika : Added serial@f0002000 (type 'serial' at '/builtin@F0000000/serial@F00020
00') to the known devices
Efika : Added pcidma@f0003800 (type 'dma-controller' at '/builtin@F0000000/pcidm
a@F0003800') to the known devices
PCI: Probing PCI hardware
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1172010880.308:1): initialized
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: MPC52xx PSC UART driver
serial@f0002000: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
MPC52xx/OpenFirmware: 13696 kB of free SRAM
eth0: Phy @ 0x10, type GENERIC (0x00008201)
ata: MPC52xx IDE/ATA libata driver
ata1: PATA max PIO4 cmd 0x0 ctl 0xC9012A5C bmdma 0x0 irq 135
scsi0 : mpc52xx_ata
ppc-of-ohci usb@f0001000: USB Host Controller
ppc-of-ohci usb@f0001000: new USB bus registered, assigned bus number 1
ppc-of-ohci usb@f0001000: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-2: new low speed USB device using ppc-of-ohci and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1024 buckets, 8192 max) - 232 bytes per conntrack
ctnetlink v0.90: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
eth0: config: auto-negotiation on, 100HDX, 10HDX.
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.254, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.254, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=192.168.0.1, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem) readonly.
Freeing unused kernel memory: 172k init
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2006 Gentoo Foundation; Distributed under the GPLv2
Press I to enter interactive boot mode
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Updating /etc/modules.conf ... [ ok ]
* Updating /etc/modprobe.conf ... [ ok ]
* Updating modules.dep ... [ ok ]
* Using /etc/modules.autoload.d/kernel-2.6 as config:
* Loading module soundcore ... [ ok ]
* Loading module snd-pcm ... [ ok ]
* Loading module snd-ac97-codec ... [ ok ]
* Loading module snd-mpc52xx-ac97 ... [ ok ]
* Autoloaded 4 module(s)
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possible) swap ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* One of the files in /etc/{conf.d,init.d} or /etc/rc.conf
* has a modification time in the future!
* Caching service dependencies ... * Can't find service 'portmap' needed by 'n
etmount'; continuing...
[ ok ]
* Setting hostname to localhost ... [ ok ]
* Loading ALSA modules ... [ ok ]
* Restoring Mixer Levels ...
* No mixer config in /etc/asound.state, you have to unmute your card!
[ ok ]
* Loading key mappings ... [ ok ]
* Setting terminal encoding to ASCII ... [ ok ]
* Setting user font ... [ ok ]
* Starting lo
* Bringing up lo
* 127.0.0.1/8
[ ok ]
* Adding routes
* 127.0.0.0/8 ... [ ok ]
* Initializing random number generator ... [ ok ]
INIT: Entering runlevel: 3
* Starting dropbear ... [ ok ]
portmap
* ERROR: Some services needed are missing. Run
* './netmount broken' for a list of those
* services. netmount was not started.
* Starting local ... [ ok ]
This is localhost.(none) (Linux ppc 2.6.19-efika-r5-efika) 22:35:41
localhost login:
kernel Modules
-------------------------
# lsmod
Module Size Used by
snd_mpc52xx_ac97 9856 0
snd_ac97_codec 109484 1 snd_mpc52xx_ac97
snd_ac97_bus 2080 1 snd_ac97_codec
snd_pcm 77508 2 snd_mpc52xx_ac97,snd_ac97_codec
snd_timer 21604 1 snd_pcm
snd 49796 4 snd_mpc52xx_ac97,snd_ac97_codec,snd_pcm,snd_time
r
snd_page_alloc 8584 1 snd_pcm
soundcore 6980 1 snd
then I obtain these messages when dmesg:
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0022 val 0000
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0022 val 0707
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0022
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0022 val 0004
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0022 val 0000
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 2a20
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 0a20
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 0a20
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 3a20
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 3a20
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 003a val 2a20
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 003a
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 003a val 2a20
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0026
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0026 val 000f
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0026 val 800f
mpc52xx-psc-ac97 sound@f0002200: ac97 read: reg 0026
mpc52xx-psc-ac97 sound@f0002200: ac97 read ok: reg 0026 val 800f
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 0026 val 000f
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 002a val 2c11
mpc52xx-psc-ac97 sound@f0002200: ac97 write: reg 002a val 3c11