rendered paste bodyscplugin: version 0.5.12 starting
** Plugin config:
** Key updates (AU) are enabled (active CAIDs)
** ScCaps are 1 2 0 0 0 0 0 0 0 0
** Concurrent limits FF=3 Soft=4
** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
INFO: loading keys from /etc/vdr/plugins/SoftCam.Key
plainkeys: unknown key type ':', adding dummy
plainkeys: unknown key type 'K', adding dummy
WARNING: cryptoworks key: bad format 'W 0d0020 00 A40...'
WARNING: cryptoworks key: bad format 'W 0d0030 00 BDD...'
plainkeys: unknown key type 'E', adding dummy
WARNING: cryptoworks key: bad format 'W 0d03b0 00 38B...'
WARNING: cryptoworks key: bad format 'W 0d03b0 01 430...'
plainkeys: unknown key type 'J', adding dummy
WARNING: cryptoworks key: bad format 'W 0d01e4 00 00E...'
WARNING: cryptoworks key: bad format 'W 0d01e4 01 6FA...'
plainkeys: unknown key type 'D', adding dummy
WARNING: cryptoworks key: bad format 'W 0d0404 00 000...'
plainkeys: unknown key type 'T', adding dummy
WARNING: cryptoworks key: bad format 'W 0d0360 01 A48...'
WARNING: cryptoworks key: bad format 'W 0d0360 00 192...'
WARNING: cryptoworks key: bad format 'W 0d035c 01 6BA...'
WARNING: cryptoworks key: bad format 'W 0D035c 00 839...'
plainkeys: unknown key type 'B', adding dummy
WARNING: cryptoworks key: bad format 'W 0D03A0 00 217...'
WARNING: seca key: bad format 'Slovak Link'
WARNING: cryptoworks key: bad format 'W 0D0320 00 EAD...'
WARNING: conax key: bad format 'Czech Link'
WARNING: cryptoworks key: bad format 'W 0D0308 00 D04...'
WARNING: cryptoworks key: bad format 'W 0D0308 01 0C1...'
WARNING: cryptoworks key: bad format 'W 0D0304 00 725...'
WARNING: cryptoworks key: bad format 'W 0D0304 01 154...'
plainkeys: unknown key type 'O', adding dummy
WARNING: cryptoworks key: bad format 'W 0D0504 00 071...'
WARNING: cryptoworks key: bad format 'W 0D050C 00 65D...'
plainkeys: unknown key type 'M', adding dummy
WARNING: cryptoworks key: bad format 'W 0D0010 00 1B2...'
WARNING: cryptoworks key: bad format 'W 0D0010 01 13B...'
plainkeys: unknown key type 'F', adding dummy
plainkeys: loaded 294 keys from /etc/vdr/plugins/SoftCam.Key
** registered systems:
** Viaccess (pri -10)
** @SHL (pri -10)
** Seca (pri -10)
** SC-Viaccess (pri -5)
** SC-Seca (pri -5)
** SC-Irdeto (pri -5)
** SC-Cryptoworks (pri -5)
** SC-Conax (pri -5)
** Nagra (pri -10)
** Nagra2 (pri -10)
** Irdeto (pri -10)
** Cryptoworks (pri -10)
** ConstCW (pri -20)
** Conax (pri -10)
** Cardclient (pri -15)
ERROR: Failed to open file '/etc/vdr/plugins/Viaccess.KID': Arquivo ou diretório inexistente
cardinfo: loaded 0 Viaccess cards from /etc/vdr/plugins/Viaccess.KID
ERROR: Failed to open file '/etc/vdr/plugins/Seca.KID': Arquivo ou diretório inexistente
cardinfo: loaded 0 Seca cards from /etc/vdr/plugins/Seca.KID
ERROR: Failed to open file '/etc/vdr/plugins/Ird-Beta.KID': Arquivo ou diretório inexistente
cardinfo: loaded 0 Irdeto cards from /etc/vdr/plugins/Ird-Beta.KID
INFO: loading cardclient config from /etc/vdr/plugins/cardclient.conf
cc: hostname=localhost port=8004 emm=0 emmCaids 1801/ffff
netwatch: up
socket: binding to 127.0.0.1:8003/udp (127.0.0.1)
cc-link: client 'gbox' ready
cc-link: created 1 client(s)
ERROR: Failed to open file '/etc/vdr/plugins/smartcard.conf': Arquivo ou diretório inexistente
INFO: loading ca cache from /etc/vdr/plugins/ca.cache
WARNING: no smartcard interface defined!
cam 0: try to open ca device myself
cam 0: no ca device, assuming budget card & SoftCSA
INFO: Using software decryption on card 0
cam 0: check ProvidesCa: 1800 1801 18ff -> n=3
cam 0: check ProvidesCa: 1800 1801 18ff -> n=3
ecmhandler 0.1: setting new SID 811
ecmhandler 0.1: is no longer idle
softcam: now 1 SoftCSA stream(s) registered
ecmhandler 0.1: triggered SID <none>/811 idx -1/1 mode -1/0 -
ecmcache: from cache: system Cardclient (1801) id 0000 with ecm 28e/80
ecmhandler 0.1: try system Nagra2 (1801) id 0000 with ecm 28e (cached) (pri=-10)
logger 0: chain caid 1800 -> Nagra(-10) [0075-82/ff/00]
logger 0: chain caid 1801 -> Nagra2(-10) Cardclient(-15) [0076-82/fe/00]
logger 0: chain caid 18ff -> Nagra2(-10) [0075-82/ff/00]
logger 0: starting chain 1801
system-nagra2: missing 4901 M1 key
system: no key found for N 4901 00
system-nagra2: missing 4901 M1 key
ecmhandler 0.1: try system Cardclient (1801) id 0000 with ecm 28e (cached) (pri=-15)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
cc-gbox: no CA descriptor for caid 1801 sid 811 prov 0000
cc: client gbox (localhost:8004) ECM failed (1 ms)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
cc-gbox: no CA descriptor for caid 1801 sid 811 prov 0000
cc: client gbox (localhost:8004) ECM failed (0 ms)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
cc-gbox: no CA descriptor for caid 1801 sid 811 prov 0000
cc: client gbox (localhost:8004) ECM failed (0 ms)
ecmhandler 0.1: try system Nagra2 (1801) id 0000 with ecm 28e (cached) (pri=-10)
system-nagra2: missing 4901 M1 key
system: no key found for N 4901 00
system-nagra2: missing 4901 M1 key
ecmhandler 0.1: try system Cardclient (1801) id 0000 with ecm 28e (cached) (pri=-15)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
ecmhandler 0.1: try system Nagra2 (1801) id 0000 with ecm 28e (cached) (pri=-10)
ecmhandler 0.1: is idle now
softcam: no SoftCSA streams registered
cam 0: check ProvidesCa: 1800 1801 18ff -> n=3
cam 0: check ProvidesCa: 1800 1801 18ff -> n=3
ecmhandler 0.1: is no longer idle
softcam: now 1 SoftCSA stream(s) registered
ecmhandler 0.1: triggered SID 811/811 idx 1/1 mode 3/0 -
system-nagra2: missing 4901 M1 key
system: no key found for N 4901 00
system-nagra2: missing 4901 M1 key
ecmhandler 0.1: try system Cardclient (1801) id 0000 with ecm 28e (cached) (pri=-15)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
socket: select timed out (2 secs)
cc-gbox: timeout on GetMsg.
cc-gbox: failed to get ECM port. GBOX running?
cc: client gbox (localhost:8004) ECM failed (1998 ms)
cc: cc-loop
cc: now trying client gbox (localhost:8004)
socket: select timed out (2 secs)
cc-gbox: timeout on GetMsg.
cc-gbox: failed to get ECM port. GBOX running?
cc: client gbox (localhost:8004) ECM failed (2000 ms)
ecmhandler 0.1: got CaDescriptors for SID 032B (len=18)
ecmhandler 0.1: descriptor 18 00 e1 5c
ecmhandler 0.1: found 1800 (Nagra) id 0000 with ecm 15c (new)
ecmhandler 0.1: descriptor 18 01 e2 8e
ecmhandler 0.1: found 1801 (Nagra2) id 0000 with ecm 28e (already present)
ecmhandler 0.1: descriptor 18 ff e1 5c
ecmhandler 0.1: found 18ff (Nagra2) id 0000 with ecm 15c (dup) (new)
ecmhandler 0.1: try system Nagra2 (1801) id 0000 with ecm 28e (cached) (pri=-10)
ecmhandler 0.1: stopping console log until valid key is found