rendered paste bodyLinux version 2.6.20-gentoo (root@gentoo_gold) (gcc version 4.1.2 (Gentoo 4.1.2)) #4 Sat Feb 17 21:26:20 EET 2007
Command line:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7170
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff79c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 262128) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 262128
On node 0 totalpages: 262031
DMA zone: 56 pages used for memmap
DMA zone: 1170 pages reserved
DMA zone: 2773 pages, LIFO batch:0
DMA32 zone: 3527 pages used for memmap
DMA32 zone: 254505 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists. Total pages: 257278
Kernel command line:
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2210.764 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1026612k/1048512k available (2510k kernel code, 21136k reserved, 1396k data, 196k init)
Calibrating delay using timer specific routine.. 4424.22 BogoMIPS (lpj=8848450)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12561159
Detected 12.561 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: e0000000-e1ffffff
PREFETCH window: b0000000-cfffffff
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: e2000000-e3ffffff
PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
lp: driver loaded but no devices found
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xffffc20000004000, 00:e7:00:3d:83:32, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
netconsole: not configured, aborting
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
sata_nv 0000:00:0a.0: version 3.2
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 23
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 1
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48
ata2.00: ata2: dev 0 multi count 1
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6B160M0 BANC PQ: 0 ANSI: 5
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
Fusion MPT SAS Host driver 3.04.03
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 22, io mem 0xe4004000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xe4002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft Wireless Optical Mouse 1.00 as /class/input/input3
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse 1.00] on usb-0000:00:02.0-3
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Intel 810 + AC97 Audio, version 1.01, 21:25:04 Feb 17 2007
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707]
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707]
ACPI: (supports S0 S1 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:11:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8704 in
res 51/40:11:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
Buffer I/O error on device sda7, logical block 11
Buffer I/O error on device sda7, logical block 12
Buffer I/O error on device sda7, logical block 13
Buffer I/O error on device sda7, logical block 14
Buffer I/O error on device sda7, logical block 15
Buffer I/O error on device sda7, logical block 16
Buffer I/O error on device sda7, logical block 17
Buffer I/O error on device sda7, logical block 18
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 7 messages suppressed.
Buffer I/O error on device sda7, logical block 9
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 256M @ 0xd0000000
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 6 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 54661 usecs
intel8x0: clocking to 46853
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 5 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
EXT3 FS on sda4, internal journal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 921 MBytes.
[fglrx] module loaded - fglrx 8.33.6 [Jan 8 2007] on minor 0
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 5 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 21 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:08:03:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in
res 51/40:08:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
ata1: EH complete
EXT3-fs: can't read group descriptor 0
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2008116k swap on /dev/sda2. Priority:-1 extents:1 across:2008116k
Real Time Clock Driver v1.12ac
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:14:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 10240 in
res 51/40:14:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 5 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
Buffer I/O error on device sda7, logical block 11
Buffer I/O error on device sda7, logical block 12
Buffer I/O error on device sda7, logical block 13
Buffer I/O error on device sda7, logical block 14
Buffer I/O error on device sda7, logical block 15
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 13 messages suppressed.
Buffer I/O error on device sda7, logical block 9
ata1: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] total GART = 268435456
[fglrx] free GART = 252440576
[fglrx] max single GART = 252440576
[fglrx] total LFB = 134217728
[fglrx] free LFB = 116387840
[fglrx] max single LFB = 116387840
[fglrx] total Inv = 134217728
[fglrx] free Inv = 134217728
[fglrx] max single Inv = 134217728
[fglrx] total TIM = 0
eth0: no IPv6 routers present
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] total GART = 268435456
[fglrx] free GART = 252440576
[fglrx] max single GART = 252440576
[fglrx] total LFB = 134217728
[fglrx] free LFB = 116387840
[fglrx] max single LFB = 116387840
[fglrx] total Inv = 134217728
[fglrx] free Inv = 134217728
[fglrx] max single Inv = 134217728
[fglrx] total TIM = 0
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 6 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
Buffer I/O error on device sda7, logical block 11
Buffer I/O error on device sda7, logical block 12
Buffer I/O error on device sda7, logical block 13
Buffer I/O error on device sda7, logical block 14
Buffer I/O error on device sda7, logical block 15
Buffer I/O error on device sda7, logical block 16
Buffer I/O error on device sda7, logical block 17
Buffer I/O error on device sda7, logical block 18
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 13 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:20:fb:9b:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 16384 in
res 51/40:20:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 5 messages suppressed.
Buffer I/O error on device sda7, logical block 9
Buffer I/O error on device sda7, logical block 10
Buffer I/O error on device sda7, logical block 11
Buffer I/O error on device sda7, logical block 12
Buffer I/O error on device sda7, logical block 13
Buffer I/O error on device sda7, logical block 14
Buffer I/O error on device sda7, logical block 15
Buffer I/O error on device sda7, logical block 16
Buffer I/O error on device sda7, logical block 17
Buffer I/O error on device sda7, logical block 18
ata1: EH complete
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (BMDMA stat 0x24)
ata1.00: cmd c8/00:07:04:9c:a6/00:00:00:00:00/e1 tag 0 cdb 0x0 data 3584 in
res 51/40:07:04:9c:a6/00:00:00:00:00/e1 Emask 0x9 (media error)
ata1.00: configured for UDMA/133
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key: Medium Error
Additional sense: Unrecovered read error - auto reallocate failed
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
01 a6 9c 04
end_request: I/O error, dev sda, sector 27696132
printk: 13 messages suppressed.
Buffer I/O error on device sda7, logical block 9
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA