vlan 3
name "LAN"
untagged 3,5
ip address 10.20.1.1 255.255.240.0
ip address 10.21.1.1 255.255.240.0
ip address 10.22.1.1 255.255.240.0
ip address 10.23.1.1 255.255.240.0
ip address 10.24.1.1 255.255.240.0
ip address 10.25.1.1 255.255.240.0
ip address 10.26.1.1 255.255.240.0
exit
fm(config)# sh ip route
IP Route Entries
Destination Gateway VLAN Type Sub-Type Metric Dist.
------------------ --------------- ---- --------- ---------- ---------- -----
10.20.0.0/20 LAN 3 connected 1 0
10.21.0.0/20 LAN 3 connected 1 0
10.22.0.0/20 LAN 3 connected 1 0
10.23.0.0/20 LAN 3 connected 1 0
10.24.0.0/20 LAN 3 connected 1 0
10.25.0.0/20 LAN 3 connected 1 0
10.26.0.0/20 LAN 3 connected 1 0
127.0.0.0/8 reject static 0 0
127.0.0.1/32 connected 1 0
client2 on port 3
ip address 10.20.1.10
client3 on port 5
ip address 10.21.1.10
i want enable traffic between client2 and client3
how can i do this