rendered paste body
zak@linux-zak:/var/log> dmesg
Linux version 2.6.16.27-0.6-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed Dec 13 09:34:50 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff72000 (ACPI NVS)
BIOS-e820: 000000001ff72000 - 000000001ff93000 (ACPI data)
BIOS-e820: 000000001ff93000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126832 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 DELL ) @ 0x000feba0
ACPI: RSDT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd1b3
ACPI: FADT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd1e7
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd1b7e
ACPI: MADT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd25b
ACPI: BOOT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd2c7
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda8 vga=0x317 resume=/dev/hda7 splash=silent
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2660.498 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513192k/523712k available (1490k kernel code, 9916k reserved, 608k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5327.58 BogoMIPS (lpj=10655165)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2355k freed
not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbb11, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
pnp: 00:0b: ioport range 0x800-0x85f could not be reserved
pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd000000-feafffff
PREFETCH window: f8000000-fc0fffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fcf00000-fcffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1171643915.848:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xf8000000, mapped to 0xe0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f3f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 169
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
input: PC Speaker as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
VBTN PCI0 USB0 USB1 USB2 USB3 PCI1 KBD
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD600BB-75CAA0, ATA DISK drive
hdb: ST320413A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 117187500 sectors (60000 MB)
native capacity is 117231408 sectors (60022 MB)
hda: Host Protected Area disabled.
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1
Probing IDE interface ide1...
hdc: Hewlett-Packard CD-Writer Plus 9300, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-612, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_pci_init_one: pci_dev class+intf: 0x1018f
ata_pci_init_one: NO_LEGACY == 0
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 177
ata2: PATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 177
scsi0 : ata_piix
scsi1 : ata_piix
Attempting manual resume
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
reiserfs: disabling flush barriers on hda8
ReiserFS: hda8: Using r5 hash to sort names
Adding 1052220k swap on /dev/hda7. Priority:-1 extents:1 across:1052220k
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 185
e100: eth0: e100_probe: addr 0xfcfff000, irq 185, MAC addr 00:07:E9:6A:A7:ED
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000ff80
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.27-0.6-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000ff60
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.27-0.6-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
usb 1-1: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ff40
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.27-0.6-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
usb 1-1: new device found, idVendor=0813, idProduct=0002
usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193
usb 1-1: configuration #1 chosen from 1 choice
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ff20
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.27-0.6-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55410 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16.27-0.6-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: new device found, idVendor=0813, idProduct=0002
usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
Linux video capture interface: v1.00
nvidia: module not supported by Novell, setting U taint flag.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
drivers/usb/media/ov511.c: USB OV511+ video device found
drivers/usb/media/ov511.c: model: Generic Camera (no ID)
drivers/usb/media/ov511.c: i2c write retries exhausted
drivers/usb/media/ov511.c: Sensor is an OV6620
drivers/usb/media/ov511.c: Device at usb-0000:00:1d.0-1 registered to minor 0
usbcore: registered new driver ov511
drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
reiserfs: disabling flush barriers on hda9
ReiserFS: hda9: Using r5 hash to sort names
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1171643938.169:2): AppArmor (version 2.0-19.43r6320) initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4091 buckets, 32728 max) - 232 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [VBTN]
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
IA-32 Microcode Update Driver v1.14 unregistered
powernow: This module only works with AMD K7 CPUs
eth0: no IPv6 routers present
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89
usb 5-8: new high speed USB device using ehci_hcd and address 3
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 2:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
sd 2:0:0:0: Attached scsi generic sg0 type 0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
usb 5-8: USB disconnect, address 3
usb 5-8: new high speed USB device using ehci_hcd and address 4
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 3:0:0:0: Attached scsi removable disk sda
sd 3:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
usb 5-8: USB disconnect, address 4
usb 5-8: new high speed USB device using ehci_hcd and address 5
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 4:0:0:0: Attached scsi removable disk sda
sd 4:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
usb 5-8: USB disconnect, address 5
usb 5-8: new high speed USB device using ehci_hcd and address 6
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 5:0:0:0: Attached scsi removable disk sda
sd 5:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
usb 5-8: USB disconnect, address 6
usb 5-8: new high speed USB device using ehci_hcd and address 7
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 6:0:0:0: Attached scsi removable disk sda
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
usb 5-8: USB disconnect, address 7
usb 5-8: new high speed USB device using ehci_hcd and address 8
usb 5-8: new device found, idVendor=05ac, idProduct=1260
usb 5-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-8: Product: iPod
usb 5-8: Manufacturer: Apple
usb 5-8: SerialNumber: 000A270018EA7C60
usb 5-8: configuration #1 chosen from 2 choices
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 1982464 2048-byte hdwr sectors (4060 MB)
sda: Write Protect is off
sda: Mode Sense: 68 00 00 08
sda: assuming drive cache: write through
sda: sda1 sda2
sd 7:0:0:0: Attached scsi removable disk sda
sd 7:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
zak@linux-zak:/var/log>