Someone

dmesg

Zapata Telephony Interface Registered on major 196
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
Freshmaker version: 63
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 3 (level, low) -> IRQ 3
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X101P
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 3 (level, low) -> IRQ 3
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone


#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# An up-to-date list of the zones can be found in the file zaptel/zonedata.c
loadzone = us
defaultzone=us
#
# My Asterisk Hardware
#
# Wildcard TDM400P FXS for 1 telephone connection.
fxoks=1
#
# Wildcard X101P FXO for 1 Pots line to Telco.
fxsks=5
fxsks=6


;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

echocancel=yes
echotraining=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1

; Produce a dial-tone when fxs pickup.
immediate=yes

[channels]

context=internal        ; Uses the [internal] context in extensions.conf
signalling=fxo_ks       ; Use FXO signalling for an FXS channel
channel => 1            ; Telephone attached to port 1

context=incoming        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
channel => 5            ; PSTN attached to port 2

context=clone        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
channel => 6            ; PSTN attached to port 2


extensions.conf --------------------------------------

[globals]
DYNAMIC_FEATURES=>automon

[incoming]
; incoming calls from the FXO port are directed to this context from zapata.conf
exten => s,1,Answer()
exten => s,2,Dial(Zap/1,10,r)
;exten => s,2,Echo()

[clone]
; incoming calls from the FXO port are directed to this context from zapata.conf
exten => s,1,Answer()
exten => s,2,Dial(Zap/1,10,r)

[internal]
exten => 4,1,Answer()
exten => 4,2,Dial(Zap/6)
exten => 5,1,VoiceMail(1234@default)
exten => 6,1,VoiceMailMain(1234@default)
exten => 7,1,Monitor(wav,/var/spool/asterisk/monitor/recording,m)  
exten => 8,1,Answer()
exten => 8,2,MusicOnHold()
exten => 9,1,Answer()
exten => 9,2,Dial(Zap/5)

[sippy]
exten => me,1,Answer()
;exten => me,2,Goto(internal,9,1)
exten => me,2,Dial(Zap/1,10,r)
;exten => me,2,Dial(Zap/5)

[iaxy]
exten => 9,1,Answer()
exten => 9,2,Dial(Zap/1,10,r)
;exten => 9,1,Dial(Zap/5)