# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "BlankTime" "3" # Blank the screen in 10 minutes (Fake)
Option "StandbyTime" "5" # Turn off screen in 20 minutes (DPMS)
Option "SuspendTime" "15" # Full hibernation in 30 minutes (DPMS)
Option "OffTime" "20" # Turn off DPMS monitor (DPMS)
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# Load "speedo"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"
# Option "XkbVariant" "latin1"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "InputDevice"
# Option "Device" "/dev/misc/psaux"
# driver counts it as a release.
# driver counts it as a touch.
#MaxDoubleTapTime Int max. time (in milliseconds) for detecting a double tap
#ClickTime Int the duration of the mouse click generated by tapping
#FastTaps Bool Makes the driver react faster to a single tap, but
# also makes double clicks caused by double tapping slower.
#EdgeMotionMinZ Int finger pressure at which minimum edge motion speed is set
#EdgeMotionMaxZ Int finger pressure at which maximum edge motion speed is set
#EdgeMotionMinSpeed Int slowest setting for edge motion speed
#EdgeMotionMaxSpeed Int fastest setting for edge motion speed
#EdgeMotionUseAlways Bool If on, edge motion is also used for normal movements,
# if off, egde motion is used only when dragging
#Repeater String repeater device
#UpDownScrolling Bool If on, the up/down buttons generate button 4/5 events.
# If off, the up button generates a double click and
# the down button generates a button 2 event.
#EmulateMidButtonTime Int max time (in milliseconds) for middle button emulation.
# 0 : Touchpad is enabled
# 1 : Touchpad is switched off
# 2 : Only tapping is switched off
#LockedDrags Bool If off, a tap and drag gesture ends when you release
# the finger. If on, the gesture is active until you
# tap a second time.
#RTCornerButton Int Which mouse button is reported on a right top corner tap
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
#RBCornerButton Int Which mouse button is reported on a right bottom corner tap
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
#LTCornerButton Int Which mouse button is reported on a left top corner tap
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
#LBCornerButton Int Which mouse button is reported on a left bottom corner tap
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
# 0=No action, 1=Left Button, 2=Middle Button, 3=Right Button
#CircularScrolling Bool If on, circular scrolling is used (see below)
#CircScrollDelta Float Move angle (radians) of finger to generate a scroll event
#CircScrollTrigger Int Trigger region on the touchpad to start circular scrolling
# 0=All Edges, 1=Top Edge, 2=Top Right Corner, 3=Right Edge,
# 4=Bottom Right Corner, 5=Bottom Edge, 6=Bottom Left Corner,
# 7=Left Edge, 8=Top Left Corner
#CircularPad Bool Instead of being a rectangle, the edge is the ellipse
# enclosed by the Left/Right/Top/BottomEdge parameters.
# For circular touchpads.
#PalmDetect Bool If palm detection should be enabled
#PalmMinWidth Int Minimum width at which touch is considered a palm
#PalmMinZ Int Minimum finger pressure at which touch is considered a palm
#CoastingSpeed Float Coasting threshold scrolling speed. 0 disables coasting.
Identifier "Mouse1"
Driver "synaptics"
Option "Protocol" "auto-dev"
#Protocol String "auto-dev" (automatic, default), "psaux" (raw) or "event" (linux 2.5 kernel events)
Option "SHMConfig" "true"
#SHMConfig Bool switch on/off shared memory for configuration
Option "LeftEdge" "1700"
#LeftEdge Int coordinates for left edge
Option "RightEdge" "5300"
#RightEdge Int coordinates for right edge
Option "TopEdge" "1700"
#TopEdge Int coordinates for top edge
Option "BottomEdge" "4200"
#BottomEdge Int coordinates for bottom edge
Option "FingerLow" "25"
#FingerLow Int When finger pressure drops below this value, the
Option "FingerHigh" "30"
#FingerHigh Int When finger pressure goes above this value, the
Option "MaxTapTime" "180"
#MaxTapTime Int max. time (in milliseconds) for detecting a tap
Option "MaxTabMove" "220"
#MaxTapMove Int max. movement of the finger for detecting a tap
Option "VertScrollDelta" "100"
#VertScrollDelta Int move distance of the finger for a scroll event
Option "HorizScrollDelta" "100"
#HorizScrollDelta Int move distance of the finger for a scroll event
Option "MinSpeed" "0.09"
#MinSpeed Float min. Speed factor
Option "MaxSpeed" "0.18"
#MaxSpeed Float max. Speed factor
Option "AccelFactor" "0.0015"
#AccelFactor Float acceleration factor
Option "TouchpadOff" "0"
#TouchpadOff Int Switch off the touchpad. Valid values are:
Option "GuestMouseOff" "false"
#GuestMouseOff Bool switch on/off guest mouse (often a stick)
Option "TapButton1" "1"
#TapButton1 Int Which mouse button is reported on a non-corner one-finger tap
Option "TapButton2" "2"
#TapButton2 Int Which mouse button is reported on a non-corner two-finger tap
Option "TapButton3" "3"
#TapButton3 Int Which mouse button is reported on a non-corner three-finger tap
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "samsung 1400"
HorizSync 31.5 - 91.38
VertRefresh 60.0 - 159.36
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 0"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "ati mobility x600"
Driver "ati"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# Option "DynamicClocks" "on"
Option "mtrr" "on"
Option "DesktopSetup" "Single"
Option "ScreenOverlap" "0"
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0"
Option "PowerState" "1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "ati mobility x600"
Monitor "samsung 1400"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection