rendered paste bodyzapata.conf:
;;; line="1 WCTDM/0/0 FXOKS"
signalling=fxo_ks
callerid="Channel 1" <6001>
mailbox=6001
group=5
context=ext_germany
channel => 1
callerid=
mailbox=
group=
context=default
;;; line="2 WCTDM/0/1 FXOKS"
signalling=fxo_ks
callerid="Channel 2" <6002>
mailbox=6002
group=5
context=from-internal
channel => 2
callerid=
mailbox=
group=
context=default
;;; line="3 WCTDM/0/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
context=default
;;; line="4 WCTDM/0/3 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
context=default
zaptel.conf:
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxoks=1
fxoks=2
fxsks=3
fxsks=4
# Global data
loadzone = de
defaultzone = de
ztcfg -vvvv:
Zaptel Version: 1.4.0
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels configured.
cat /proc/interrupts
CPU0 CPU1
0: 111773104 0 IO-APIC-edge timer
1: 10 251 IO-APIC-edge i8042
6: 6 0 IO-APIC-edge floppy
7: 2 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-level acpi
50: 0 0 IO-APIC-level uhci_hcd:usb5, ehci_hcd:usb6
58: 142251 0 IO-APIC-level skge
169: 0 0 IO-APIC-level uhci_hcd:usb1, libata
177: 6685 24376 IO-APIC-level 3w-9xxx, uhci_hcd:usb2
225: 27380 111701653 IO-APIC-level uhci_hcd:usb3, ehci_hcd:usb7, wctdm
233: 0 0 IO-APIC-level uhci_hcd:usb4, libata, libata
NMI: 0 0
LOC: 108201696 108201731
ERR: 0
MIS: 0