rendered paste bodyLinux version 2.6.9-42.0.3.mpc18smp (root@centos4i386build.mpc.local) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Wed Jan 17 13:55:55 GMT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000abf00000 (usable)
BIOS-e820: 00000000abf00000 - 00000000abf0d000 (ACPI data)
BIOS-e820: 00000000abf0d000 - 00000000abf80000 (ACPI NVS)
BIOS-e820: 00000000abf80000 - 00000000ac000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000254000000 (usable)
8640MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7a60
NX (Execute Disable) protection: active
On node 0 totalpages: 2441216
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 2211840 pages, LIFO batch:16
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD ) @ 0x000f7b00
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xabf06cfc
ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0xabf0c8fe
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0xabf0c972
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xabf0cd5a
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0xabf0cdaa
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0xabf0cdf6
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xabf0ce2e
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xabf0cec8
ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0xabf0cef0
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at b0000000 (gap: ac000000:34000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0400000 soft=c03e0000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
spurious 8259A interrupt: IRQ7.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 8303744k/9764864k available (1917k kernel code, 82844k reserved, 787k data, 188k init, 7470080k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2211.845 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 4425.64 BogoMIPS (lpj=2212821)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2214 stepping 02
per-CPU timeslice cutoff: 2926.82 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0401000 soft=c03e1000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4422.70 BogoMIPS (lpj=2211353)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2214 stepping 02
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c0402000 soft=c03e2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4422.71 BogoMIPS (lpj=2211359)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU2: Physical Processor ID: 1
CPU2: Processor Core ID: 0
CPU2: Initial APIC ID: 2
CPU 2(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2214 stepping 02
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c0403000 soft=c03e3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4422.82 BogoMIPS (lpj=2211412)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU3: Physical Processor ID: 1
CPU3: Processor Core ID: 1
CPU3: Initial APIC ID: 3
CPU 3(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2214 stepping 02
Total of 4 processors activated (17693.89 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs:
CPU#0 had 1458368 usecs TSC skew, fixed it up.
CPU#1 had 0 usecs TSC skew, fixed it up.
CPU#2 had 0 usecs TSC skew, fixed it up.
CPU#3 had 0 usecs TSC skew, fixed it up.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 642k freed
NET: Registered protocol family 16
PCI: BIOS BUG #81[00000282] found
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Root Bridge [PCI1] (00:80)
PCI: Probing PCI hardware (bus 80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 169
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 185
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 20 (level, high) -> IRQ 193
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 19
ACPI: PCI interrupt 0000:00:05.1[B] -> GSI 19 (level, high) -> IRQ 201
ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 18
ACPI: PCI interrupt 0000:00:05.2[C] -> GSI 18 (level, high) -> IRQ 209
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 17 (level, high) -> IRQ 217
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 16
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, high) -> IRQ 225
ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 23 (level, high) -> IRQ 169
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 22
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 21
ACPI: PCI interrupt 0000:01:04.2[B] -> GSI 21 (level, high) -> IRQ 185
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 20
ACPI: PCI interrupt 0000:02:00.1[A] -> GSI 20 (level, high) -> IRQ 193
ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 19 (level, high) -> IRQ 201
ACPI: PCI interrupt 0000:80:01.1[A]: no GSI
Simple Boot Flag at 0x36 set to 0x80
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1171030665.820:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key A0A56291F6317FF
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS2++ Logitech MX Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
PCI0 USB0 USB2 MAC0 MAC2 P2P0 KBC0 MSE0 XVR0 XVR1 XVR2 NECA XVR3 XVR4 XVR5 MAC0 MAC2 XVR0 XVR1 XVR2 XVR3 XVR4 XVR5
Freeing unused kernel memory: 188k freed
SCSI subsystem initialized
libata version 1.20 loaded.
sata_nv 0000:00:05.0: version 0.8
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 20 (level, high) -> IRQ 193
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0x34D0 ctl 0x34C6 bmdma 0x3490 irq 193
ata2: SATA max UDMA/133 cmd 0x34C8 ctl 0x34C2 bmdma 0x3498 irq 193
ata1: SATA link up 3.0 Gbps (SStatus 123)
ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3f41 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 234441648 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: SATA link up 3.0 Gbps (SStatus 123)
ata2: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3f41 87:4023 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 234441648 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_nv
Vendor: ATA Model: WDC WD1200JS-55N Rev: 10.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: ATA Model: WDC WD1200JS-55N Rev: 10.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:00:05.1[B] -> GSI 19 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:00:05.1 to 64
ata3: SATA max UDMA/133 cmd 0x34E8 ctl 0x34DE bmdma 0x34A0 irq 201
ata4: SATA max UDMA/133 cmd 0x34E0 ctl 0x34DA bmdma 0x34A8 irq 201
ata3: SATA link up 3.0 Gbps (SStatus 123)
ata3: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4163 85:7469 86:3d41 87:4163 88:407f
ata3: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: SATA link down (SStatus 0)
scsi3 : sata_nv
Vendor: ATA Model: WDC WD5000KS-00M Rev: 07.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:00:05.2[C] -> GSI 18 (level, high) -> IRQ 209
PCI: Setting latency timer of device 0000:00:05.2 to 64
ata5: SATA max UDMA/133 cmd 0x3800 ctl 0x34F6 bmdma 0x34B0 irq 209
ata6: SATA max UDMA/133 cmd 0x34F8 ctl 0x34F2 bmdma 0x34B8 irq 209
ata5: SATA link down (SStatus 0)
scsi4 : sata_nv
ata6: SATA link down (SStatus 0)
scsi5 : sata_nv
SGI XFS (RHEL4 version 0.2) with ACLs, security attributes, large block numbers, no debug enabled
XFS mounting filesystem sda1
Starting XFS recovery on filesystem: sda1 (dev: sda1)
Ending XFS recovery on filesystem: sda1 (dev: sda1)
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.9-42.0.3.mpc18smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.42-rh.
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, high) -> IRQ 225
PCI: Setting latency timer of device 0000:00:08.0 to 64
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:08.0
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 23 (level, high) -> IRQ 169
PCI: Setting latency timer of device 0000:00:09.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:09.0
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 22 (level, high) -> IRQ 177
ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 17 (level, high) -> IRQ 217
PCI: Setting latency timer of device 0000:00:06.1 to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
gameport: pci0000:01:04.1 speed 1217 kHz
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 185
ehci_hcd 0000:00:02.1: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: irq 185, pci mem f88dc000
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 177
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 177, pci mem f88de000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:01:04.2[B] -> GSI 21 (level, high) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[b0108000-b01087ff] Max Packet=[2048]
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 22 (level, high) -> IRQ 177
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[b0108800-b0108fff] Max Packet=[2048]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c01510a548f]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[00e0810000270e64]
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
XFS mounting filesystem sdc1
Ending clean XFS mount for filesystem: sdc1
Adding 20972848k swap on /dev/sda2. Priority:-1 extents:1
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: no link during initialization.
i2c /dev entries driver
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0354780(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[4634]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4634]: Module vmmon: initialized
/dev/vmnet: open called by PID 4896 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 19 (level, high) -> IRQ 201
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
eth0: link up.
eth0: link down.
eth0: link up.