rendered paste body _____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
zd1211 - version 2.16.0.0
vendor_id = 0ace
product_id = 1211
USB 2.0 Host
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 200
zd1211:bulk in: wMaxPacketSize = 200
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:interrupt out: wMaxPacketSize = 40
EEPORM Ver = 4330
zd1211:macp->release != EEPVer
zd1211:uImgLength = e00
zd1211:translen = e00
zd1211:uCodeOfst = ee00
zd1211:result = ffffff92
##### Warning! ####
usb_control_msg doesn't send all data out
You need to decrease the message amount in each send
zd1211: usb_control_msg 1 fail: FFFFFF92
zd1211_Download_IncludeFile failed
zd1211: probe of 1-2:1.0 failed with error -5
usbcore: registered new interface driver zd1211
usb 1-2: USB disconnect, address 11
usb 1-2: new high speed USB device using ehci_hcd and address 13
usb 1-2: configuration #1 chosen from 1 choice
vendor_id = 0ace
product_id = 1211
USB 2.0 Host
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 200
zd1211:bulk in: wMaxPacketSize = 200
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:interrupt out: wMaxPacketSize = 40
EEPORM Ver = 4330
zd1211:macp->release != EEPVer
zd1211:uImgLength = e00
zd1211:translen = e00
zd1211:uCodeOfst = ee00
zd1211:result = e00
Finsih download Firmware. Ready to reboot
zd1211:FIRMWARE_CONFIRM = 1
zd1211:USB Download Boot code success
zd1211:uImgLength = e88
zd1211:translen = e88
zd1211:uCodeOfst = f895
zd1211:result = e88
Finsih download Firmware. Ready to reboot
zd1211:FIRMWARE_CONFIRM = 1
zd1211:USB Download Boot code success
zd1211:uImgLength = 12a
zd1211:translen = 12a
zd1211:uCodeOfst = f800
zd1211:result = 12a
zd1211:uImgLength = 1400
zd1211:translen = 1000
zd1211:uCodeOfst = ee00
zd1211:result = 1000
zd1211:translen = 400
zd1211:uCodeOfst = f600
zd1211:result = 400
Finsih download Firmware. Ready to reboot
zd1211:FIRMWARE_CONFIRM = 1
zd1211:USB Download Boot code success
zd1211:MAC address = 00:11:a3:04:37:a0
zd1211:AddrEntryTable = f7d4
zd1211:RF_Mode = 00002109
PA type: 0
UW2453 RF
zd1211:Mixed Mode
zd1211:File opening did not success
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:16
zd1205: (exit) zd1205_config, /home/chy1013m1/Desktop/ZD1211LnxDrv_2_16_0_0/src/zd1205.c line 2588
zd1205: (exit) zd1205_init, /home/chy1013m1/Desktop/ZD1211LnxDrv_2_16_0_0/src/zd1205.c line 8560
usbcore: registered new interface driver zd1211rw
zd1205: (enter) zd1205_open, /home/chy1013m1/Desktop/ZD1211LnxDrv_2_16_0_0/src/zd1205.c line 4417
RadioOn
zd1205: (exit) zd1205_open, /home/chy1013m1/Desktop/ZD1211LnxDrv_2_16_0_0/src/zd1205.c line 4516
zd1211:Mixed Mode
zd1211:Mixed Mode
zd1211:Mixed Mode